Checks
Running out of fuel (Diesel)
Other engines
BlueHDi engines
F
Add at least five litres of Diesel fuel to the
F
F
F
Fill the fuel tank with at least five litres of
tank.
Diesel.
F
F
Open the bonnet.
If necessary, unclip the styling cover for
access to the priming pump.
Switch on the ignition (without starting the
engine).
Wait around 6 seconds and switch off the
ignition.
F
F
Squeeze and release the priming pump
repeatedly until resistance is felt (there
may be resistance at the first press).
Operate the starter to start the engine
(if the engine does not start at the first
attempt, wait around 15 seconds before
trying again).
F
F
Repeat the operation 10 times.
Operate the starter to run the engine.
On vehicles fitted with Diesel engines, the fuel
system must be primed if you run out of fuel.
For all versions other than BlueHDi, refer to the
corresponding engine compartment view.
F
If the engine does not start after a few
attempts, operate the priming pump again
then start the engine.
F
F
Refit the styling cover and clip it in place.
Close the bonnet.
For more information on the Diesel
misfuel prevention device, refer to the
corresponding section.
If the engine does not start first time,
don't keep trying but start the procedure
again from the beginning.
184
English 
Russian 
French 
Spanish