Direction indicators (flashers)
Manual "Follow-me-home" lighting
Activation
Turn ring A to the "AUTO" position.
When the automatic switching on of
the lights function is deactivated, the
side lights and dipped headlamps re-
main on for the duration selected for the
automatic "follow-me-home" lighting.
The automatic lighting is accompa-
nied by a message on the multifunc-
tion display.
Left: downwards.
Right: upwards.
If the vehicle is not fitted with the
automatic switching on of the lights
function, when you leave your vehicle,
the side lights and dipped headlamps
remain on for thirty seconds.
Note: if you forget to cancel the di-
rection indicator, the volume of the
audible signal will increase, if you
are driving at a speed greater than
50 mph (80 km/h).
Deactivation
Turn ring A to a position other
than "AUTO". Switching off is ac-
companied by a message on the
multifunction display.
Activation:
If the brightness sensor does not
function correctly, the lights come
on accompanied by the service
warning light, an audible signal and
a message on the multifunction dis-
play.
switch off the engine,
"flash" the headlamps,
get out of the vehicle and lock it.
Automatic "Follow me home"
lighting
With the ignition off, when you leave
your vehicle with the automatic
switching on of the lights function
activated, the side lights and dipped
headlamps remain on for the select-
ed duration.
Deactivation:
"flash" the headlamps again,
get out of the vehicle and lock it.
Contact a PEUGEOT dealer.
To deactivate or activate
this function, go to the mul-
tifunction display configura-
tion menu.
Automatic switching on of the
lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of
the windscreen wipers. They switch
off as soon as the light becomes
bright enough or the windscreen wip-
ers stop.
The duration of the timed
period must also be set (15, 30,
60 seconds), via the multifunction
display configuration menu, except
in the case of the monochrome
screen A for which it is pre-set.
Do not cover the brightness
sensor, coupled with the rain
sensor, located in the centre
of the windscreen, behind
the interior mirror. It is used for the
automatic switching on of the lights.
Note: in foggy weather or in snow,
the brightness sensor can detect suf-
ficient light. As a consequence, the
lights will not come on automatically.
Cancelling:
"flash" the headlamps,
get out of the vehicle and lock it.
72
English 
