Get INSTRUMENTS and CONTROLS Guide for Peugeot 308 4 Door First Genration (2007-2013)

INSTRUMENTS and CONTROLS

Display

PETROL ꢀ DIESEL MANUAL GEARBOX INSTRUMENT PANELS

A. Speed limiter

or

Cruise control.

(km/h or mph)

B. Trip distance recorder.

(km or miles)

Panel grouping together the vehicle 5. Display.

operation indication dials and warning

lights.

6. Display zero reset button.

Resets the selected function to

zero (trip distance recorder or

service indicator).

7. Instrument panel lighting button.

Dials

The following three functions are dis-

played in succession when the ignition

is switched on.

C. Service indicator.

(km or miles) then,

Engine oil level indicator.

then

1. Rev counter.

Indicates the speed of rotation of

the engine (x 1 000 rpm).

2. Coolant temperature.

Indicates the temperature of the

engine coolant (°Celsius).

3. Fuel level.

Adjusts the brightness of the

lighting of the instruments and

controls.

distance recorder.

(km or miles)

Indicates the quantity of fuel

remaining in the tank.

4. Vehicle speed.

i

For further information, refer to the

paragraph relating to the button or

function and its associated display.

Indicates the current speed of the

moving vehicle (km/h or mph).

22

INSTRUMENTS and CONTROLS

Displays

PETROL ꢀ DIESEL MANUAL OR 6ꢀSPEED PILOTED MANUAL OR

AUTOMATIC GEARBOX INSTRUMENT PANELS

A. Trip distance recorder.

(km or miles)

B. Distance recorder.

(km or miles)

Panel grouping together the vehicle 5. Small display.

operation indication dials and warning

lights.

6. Large display.

7. CHECK/display zero reset

The following two functions are dis-

played in succession when the ignition

is switched on.

C. Service indicator.

(km or miles) then,

Engine oil level indicator.

button.

Starts a manual CHECK.

Resets the function selected to

zero (trip distance recorder or

service indicator).

Dials

1. Rev counter.

Indicates the speed of rotation of

the engine (x 1 000 rpm).

2. Coolant temperature.

8. Instrument panel lighting button.

The following functions are displayed in

accordance with the selection.

Indicates the temperature of the

engine coolant (°Celsius).

3. Fuel level.

Adjusts the brightness of the

lighting of the instruments and

controls.

-

Warning lights/CHECK.

Tyre under-inﬂation detection.

Speed limiter/Cruise control.

6ꢀspeed piloted manual or

automatic gearbox.

Indicates the quantity of fuel

remaining in the tank.

4. Vehicle speed.

For further information, refer to the

i

paragraph which relates to the but-

ton or function and its associated

display.

Indicates the current speed of the

moving vehicle (km/h or mph).

-

Navigation ꢀ Guidance/Trip

computer information.

23

INSTRUMENTS and CONTROLS

Indicator and warning lights

Operation indicator lights

Visual indicators informing the driver

that a system is in operation (operation

or deactivation indicator lights) or of the

occurrence of a fault (warning light).

Ifoneofthefollowingindicatorlightscomes

on, this conﬁrms that the corresponding

system has come into operation.

Common operation indicator lights

Leftꢀhand direction indicator.

Dipped headlamps.

When the ignition is switched on

The warning lights come on for a few

seconds when the vehicle’s ignition is

switched on.

When the engine is started, these warning

lights should switch off.

If they remain on, before moving off,

consult the warning light concerned.

Main beam headlamps.

Handbrake applied.

Associated warnings

The switching on of certain warning

lights may be accompanied by an audi-

ble signal and a message on the multi-

function display.

Rightꢀhand direction

indicator.

!

Front fog lamps.

The warning lights may come on

continuously or ﬂash.

Certain warning lights may come

on in two different modes. Only by

relating the type of lighting to the

operating status of the vehicle can

it be ascertained whether the situ-

ation is normal or whether a fault

has occurred.

Rear fog lamp.

Diesel engine preꢀheating.

Wait until this is switched off

before operating the starter.

INSTRUMENTS and CONTROLS

Speciﬁc operation indicator lights

Automatic wiping.

6ꢀspeed piloted manual gearbox.

If this is displayed, it indicates

that you have activated the auto-

matic windscreen wiping.

This display indicates the po-

sition that you have selected

on the gear selection gate

(R, N, A or M).

Automatic lighting.

If this is displayed, it indicates

that you have activated the

automatic switching on of the

headlamps.

This display indicates the gear

engaged in automatic or man-

ual operating mode (1 to 6).

Speed limiter.

This display indicates the op-

erating mode selected (auto-

matic or sport).

If this is displayed, it indicates

that you have activated the

speed limiter mode.

Foot on brake.

Press the brake pedal to start

the engine with the 6-speed pi-

loted manual gearbox or auto-

matic gearbox.

If this is displayed, it indi-

cates that you can set the

speed limiter speed value to

be stored.

Automatic gearbox.

This display indicates the posi-

tion that you have selected on

the gear selection gate (P, R, N

or D).

The other indicator lights appear on the

large display, located in the centre of

the instrument panel.

Cruise control.

If this is displayed, it indicates

that you have activated the

cruise control mode.

If this is displayed it indi-

cates that you can set the

cruise control speed value

to be stored.

This display indicates the gear

engaged in the automatic or

manual operation programme.

Automatic locking.

If this is displayed, it indicates

that you have activated the au-

tomatic locking of the doors and

boot while driving.

This display indicates the op-

erating programme selected

(automatic, sport, snow or

manual).

25

INSTRUMENTS and CONTROLS

Deactivation warning lights

If one of the following warning lights

comes on, this conﬁrms that the corre-

sponding system has been switched off

intentionally.

Dynamic stability control

(ESP/ASR) deactivation.

The ESP/ASR system is put

into service automatically when

the vehicle is started.

Automatic wiping.

If this is displayed, it indicates

that you have deactivated the

automatic windscreen wiping.

A speciﬁc button, located in the centre

of the fascia, permits deactivation of the

system. This is conﬁrmed by continu-

ous lighting of this warning light and of

the indicator light on the button.

From approximately 30 mph (50 km/h),

the system is reactivated automatically.

Automatic lighting.

If this is displayed, it indicates

that you have deactivated the

automatic switching on of the

headlamps.

Speed limiter.

If this is displayed, it indicates

that you have deactivated the

speed limiter.

Common deactivation warning

lights

Speciﬁc deactivation warning lights

Passenger’s air bag system

deactivation.

The passenger’s air bag system

is put into service automatically

when the vehicle is started.

Cruise control.

If this is displayed, it indicates

that you have deactivated the

cruise control.

A speciﬁc control, located on the pas-

senger’s side of the fascia, permits

deactivation of the system. This is

conﬁrmed by continuous lighting of this

warning light on the instrument panel or

on the seat belt and passenger’s front

air bag warning lights display.

The other warning lights appear on the

large display, located in the centre of

the instrument panel.

Automatic locking.

If this is displayed, it indicates

that you have deactivated the

automatic locking of the doors

and boot while driving.

26

INSTRUMENTS and CONTROLS

Warning lights

When the engine is running or the vehi- Common warning lights

Braking.

If this comes on, it indicates the

cle is moving, the lighting of one of the

following warning lights indicates the

occurrence of a fault requiring interven-

tion on the part of the driver.

Central alert.

occurrence of a fault in one of

the braking systems:

signiﬁcant drop in the level in the

Lighting is associated with

the displaying of another

warning light:

-

circuit,

-

punctured wheel,

braking,

power steering,

engine oil pressure,

coolant temperature,

-

electronic brake force distribution

(EBFD) faulty (simultaneous

lighting of the ABS warning light),

stop the vehicle immediately and as

safely as possible.

When the vehicle is moving, check that

the handbrake is fully released.

stop the vehicle immediately and as

safely as possible.

Antiꢀlock braking system

(ABS).

If this comes on, it indicates the

occurrence of a fault in the anti-

lock braking system.

Service.

If this comes on, it indicates the

occurrence of a problem in one

of the systems which does not

have a speciﬁc warning light.

However, this does not prevent opera-

tion of the vehicle’s assisted braking.

In order to identify it, consult the mes-

sage on the multifunction display.

After checking:

-

that the doors, boot, the rear

screen and bonnet are closed,

the engine oil level,

the screenwash ﬂuid level,

the remote control battery,

the pressure of the tyres,

Dynamic stability control

(ESP/ASR).

The ESP/ASR system is put

into service automatically when

the vehicle is started.

Any fault resulting in the displaying

-

!

of a warning light must be the subject

of further diagnostics by reading the

associated message on the multi-

function display.

Unless the system has been deactivated,

if this warning light and the indicator light

on the button come on continuously, this

indicates the occurrence of a fault in

the ESP/ASR system or in the hill start

assistance.

the end of saturation of the particle

emission ﬁlter (Diesel),

Should you encounter any prob-

lems, do not hesitate to contact a

PEUGEOT dealer.

for any other situations, contact a

PEUGEOT dealer.

27

INSTRUMENTS and CONTROLS

Speciﬁc warning lights

Engine autodiagnostics

system.

If this comes on, it indicates

the occurrence of a fault in the

engine management system.

Air bags.

If this comes on, it indicates the

occurrence of a fault in one of

the air bag or seat belt preten-

sioner systems.

If it ﬂashes, it indicates the occurrence of

a fault in the emission control system.

Seat belt not fastened/

unfastened.

Low fuel level.

If this comes on, it indicates that

you only have enough fuel left

to drive approximately 30 miles

(50 km).

If this comes on, it indicates

that the driver and/or the front

passenger has not fastened or has un-

fastened his seat belt.

It also indicates that one or more rear

passengers have unfastened their seat

belt.

Engine oil pressure.

If this comes on, it indicates the

occurrence of a fault in the en-

gine lubrication circuit. Stop the

vehicle immediately and as safely as

possible.

The capacity of the tank is approximately

60 litres.

Maximum coolant

temperature.

If this comes on, it indicates that

the temperature in the cooling

system is too high. Stop the vehicle im-

mediately and as safely as possible.

Battery charge.

Water in diesel.

If this comes on, it indicates

the occurrence of a fault in the

battery charging circuit (dirty or

loose terminals, slack or cut alternator

belt, ...).

If this comes on, it indicates the

presence of water in the diesel

ﬁlter.

There is a risk of damage to the injection

system on Diesel engines.

Door open.

Adoor, the boot, the rear screen

or the bonnet* is open:

-

if the speed is below 6 mph

(10 km/h), this warning light comes

on continuously.

if the speed is higher than 6 mph

(10 km/h), this warning light comes

on continuously, accompanied by

an audible signal.

* Only with alarm.

28

INSTRUMENTS and CONTROLS

Speciﬁc warning lights

Engine oil pressure.

If this is displayed, it indicates

!

Certain warning lights may be

linked with those of the instrument

panel.

If they are linked with the STOP

warning light, stop the vehicle imme-

diately and as safely as possible.

the occurrence of a fault in the

engine lubrication circuit. Stop

the vehicle immediately and as safely

as possible.

Engine oil level.

If this is displayed, it indicates

an insufﬁcient level of oil in the

engine. Stop the vehicle imme-

diately and as safely as possible.

Directional headlamps.

Service.

If this is displayed, it indicates

the occurrence of a fault in one

of the following:

If this ﬂashes, it indicates the

occurrence of a fault in the di-

rectional headlamps system.

Coolant temperature.

-

the engine management system,

the emission control system,

the lane departure warning system.

If this is displayed, it indicates

that the temperature in the

cooling system is too high. Stop

the vehicle immediately and as safely

as possible.

The other warning lights appear on the

large display, located in the centre of

the instrument panel.

Depending on the seriousness of the

fault, they may be displayed in orange

or red.

Engine autodiagnostics

system.

If this is displayed, it indicates

the occurrence of a fault in the

engine management system.

Coolant level.

If this is displayed, it indicates

an insufﬁcient level of coolant

in the circuit. Stop the vehicle

immediately and as safely as

possible.

The displaying of certain warning

lights may be accompanied by an

i

Battery charge.

audible signal and a message on

the multifunction display.

If this is displayed, it indicates

the occurrence of a fault in the

battery charging circuit (dirty or

loose terminals, slack or cut alternator

belt, ...).

29

INSTRUMENTS and CONTROLS

Screenwash ﬂuid level.

Air bags.

Dynamic stability control

(ESP/ASR).

The ESP/ASR system is put

into service automatically when

the vehicle is started.

If this is displayed, following an

action on the wipers stalk, it in-

dicates an insufﬁcient level of

ﬂuid.

If this is displayed, it indicates

the occurrence of a fault in one

of the air bag or pretensioning

seat belt systems.

Unless the system has been deacti-

vated, if this warning light and the indi-

cator light on the button come on, this

indicates the occurrence of a fault in

the ESP/ASR system or in the hill start

assistance.

Fill the screenwash/headlamp wash ﬂuid

reservoir when you stop.

Braking.

If this is displayed, it indicates

the occurrence of a fault in one

of the braking systems:

Fuel level.

If this is displayed, it indicates

that there is only enough fuel

remaining to drive approximate-

ly 30 miles (50 km).

Ice warning.

-

signiﬁcant drop in the level in the

circuit,

electronic brake force distribution

(EBFD) faulty (simultaneous

lighting of the ABS warning light).

If this is displayed, it indicates

that there is risk of the forma-

tion of ice on the road below a

temperature of 3 °C.

-

The capacity of the tank is approximately

60 litres.

Electronic immobiliser.

If this is displayed, it indicates

the occurrence of a fault in the

electronic engine immobiliser

system or that the remote control bat-

tery is ﬂat.

Drive carefully.

Stop the vehicle immediately and as

safely as possible.

If the vehicle is moving, check that the

handbrake is released fully.

Power steering.

If this is displayed, it indicates

the occurrence of a fault in

the power steering. Stop the

vehicle immediately and as safely as

possible.

Handbrake.

If this is displayed, while the

vehicle is moving, it indicates

that the handbrake has not

been released fully.

Door open.

Adoor, the boot, the rear screen

or the bonnet* is open:

-

if the speed is below 6 mph

(10 km/h), this warning light is

displayed in orange,

if the speed is higher than 6 mph

(10 km/h), this warning light is

displayed in red.

Antiꢀlock braking system

(ABS).

If this is displayed, it indicates

the occurrence of a fault in the

anti-lock braking system.

However, this does not prevent opera-

tion of the vehicle’s assisted braking.

* Only with alarm.

30

INSTRUMENTS and CONTROLS

6ꢀspeed piloted manual

gearbox or automatic

gearbox.

Punctured wheel.

Water in diesel.

If this is displayed, it indicates

that one or more wheels are

punctured. Stop the vehicle

immediately and as safely as

possible.

If this is displayed, it indicates

the presence of water in the

diesel ﬁlter.

If this is displayed, it indicates

the occurrence of a fault in the 6-speed

piloted manual gearbox or automatic

gearbox. The gearbox will then operate in

down-grade mode, locked on 3rd gear.

There is a risk of damage to the injection

system on Diesel engines.

Change the damaged wheel and have it

repaired by a PEUGEOT dealer.

Position P or N.

Tyre under-inﬂation

detection.

Particle emission ﬁlter

(Diesel).

If this is displayed, linked with

the service warning light, it indi-

If this is displayed, it indicates

that the gear lever must be

placed in position P or N in or-

der to start the engine.

If this is displayed, it indicates

the occurrence of a fault on one

of the sensors or in the tyre under-inﬂa- cates the start of saturation of the par-

Invalid value.

tion detection system.

ticle emission ﬁlter or a low diesel addi-

tive reservoir level.

sensor when the spare wheel, which As soon as trafﬁc conditions permit, re-

It may also indicate the absence of a

If this is displayed, it indicates

the occurrence of a fault in the

programme of the 6-speed pi-

loted manual gearbox or auto-

matic gearbox.

does not have a sensor, is ﬁtted in place generate the ﬁlter by driving at a speed

of a punctured wheel.

of at least 40 mph (60 km/h) until the

service warning light is switched off.

Automatic switching on of

the lights.

If this comes on, it indicates

the occurrence of a fault in the

automatic switching on of the

lights.

If the service warning light is still displayed,

the additive level is low. Have it topped up

by a PEUGEOT dealer without delay.

Visual and/or audible

parking assistance.

If this comes on, in forward and/

or reverse gear, it indicates a

fault in the parking assistance

system.

Use the other positions of the lights

stalk.

Deﬂated wheel.

Automatic headlamp

adjustment.

If this is displayed, it indicates the

occurrence of a fault in the auto-

matic headlamp adjustment.

If this is displayed, it indicates

an insufﬁcient pressure in one

or more wheels.

Check the pressure of the tyres as soon

as possible.

INSTRUMENTS and CONTROLS

After driving for a few minutes, the tem-

perature and pressure in the cooling

system increase.

To top up the level:

 wait for the engine to cool,

Manual Check

Coolant temperature indicator

System which informs the driver of the System which informs the driver of

warnings present and of the activated the changes in the temperature of the

or deactivated status of the functions.

engine coolant while driving.

 unscrew the cap by two turns to

allow the pressure to drop,

 when the pressure has dropped,

remove the cap,

 top up the level to the "MAX" mark.



With the engine running, to start a

manual check, press the "CHECK/000"

button on the instrument panel.

With the engine running, when the

needle is:

If no "major" faults have been detected,

"CHECK OK" appears on the large instru-

ment panel display.

-

in zone A, the temperature is

correct,

-

in zone B, the temperature is

too high; the max temperature

warning light 1 and the central

STOP warning light come on,

accompanied by an audible signal

and a message on the multifunction

display.

If a "minor" fault has been detected, the

warning lights concerned then "CHECK

OK" appear on the large instrument

panel display. Consult a PEUGEOT

dealer.

You MUST stop as soon as it is safe

to do so.

Wait a few minutes before switching off

the engine.

Consult a PEUGEOT dealer.

If a "major" fault has been detected, only

the warning lights concerned appear on

the large instrument panel display. Have it

checked by a PEUGEOT dealer.

32

INSTRUMENTS and CONTROLS

More than 1 800 miles (3 000 km) Less than 600 miles (1 000 km)

remain before the next service is due remain before the next service is

Service indicator

System which informs the driver when

the next service is due, in accord-

ance with the manufacturer’s servicing

schedule.

The point at which the service is due is

calculated from the last indicator zero re-

set. It is determined by two parameters:

due

service information appears on the Example: 900 km remain before the

When the ignition is switched on, no

display.

next service is due.

For 5 seconds after the ignition is

switched on, the display indicates:

Between 600 miles (1 000 km) and

1 800 miles (3 000 km) remain before

the next service is due

-

the distance travelled,

the time elapsed since the last

service.

For 5 seconds after the ignition is

switched on, the spanner symbolising

the service operations comes on. The

distance recorder display line indicates

the distance remaining before the next

service is due.

Example: 2 800 km remain before the

next service is due.

For 5 seconds after the ignition is

switched on, the display indicates:

5 seconds after the ignition is switched

on, the distance recorder resumes its

normal operation. The spanner reꢀ

mains on to indicate that a service

must be carried out soon.

5 seconds after the ignition is switched

on, the spanner is switched off; the

distance recorder resumes its normal

operation. The display then indicates

the total and trip distances.

33

INSTRUMENTS and CONTROLS

Service overdue

Service indicator zero reset

For 5 seconds after the ignition is

switched on,the spanner ﬂashes to in-

dicate that the service must be carried

out as soon as possible.

Example: the service is overdue by

300 miles (km).

i

Following this operation, if you wish

to disconnect the battery, lock the

vehicle and wait at least ﬁve minutes

for the zero reset to be taken into

account.

For 5 seconds after the ignition is

switched on, the display indicates:

Retrieving the service information

You can access the service information

at any time.

 Press the trip distance recorder

zero reset button.

The service information is displayed for

a few seconds, then disappears.

5 seconds after the ignition is switched

on, the distance recorder resumes its

normal operation. The spanner reꢀ

mains lit.

After each service, the service indicator

must be reset to zero.

To do this, carry out the following pro-

cedure:

 switch off the ignition,

 press and hold the trip distance re-

corder zero reset button,

 switch on the ignition; the distance

recorder display begins a count-

down,

 when the display indicates "=0", re-

lease the button; the spanner disap-

pears.

i

The distance remaining may be

weighted by the time factor, de-

pending on the driver’s driving

habits.

Therefore, the spanner may also

come on if you have exceeded the

two year service interval.

34

INSTRUMENTS and CONTROLS

Oil level correct

Oil level gauge fault

Engine oil level indicator

System which informs the driver of the

validity or invalidity of the engine oil

level.

This is indicated by the ﬂashing of

"OIL ꢀꢀ". Consult a PEUGEOT dealer.

Lack of oil

Dipstick

This is indicated by the ﬂashing of Refer to the "Checks" section to locate

"OIL", linked with the service warning the dipstick and the oil ﬁller cap on your

light, accompanied by an audible sig- engine.

nal and a message on the multifunction

display.

If the lack of oil is conﬁrmed by a check

using the dipstick, it is essential that the

level is topped up to prevent damage to

the engine.

There are 2 marks on the

dipstick:

-

A = max; never exceed

this level,

-

B = min; top up the

level via the oil ﬁller

cap, using the type of oil

suited to your engine.

Thisinformationisindicatedforafew sec-

onds when the ignition is switched on,

after the service information.

i

The level read will only be correct if

the vehicle is on level ground and

the engine has been off for more

than 15 minutes.

35

INSTRUMENTS and CONTROLS

Total distance recorder

Lighting rheostat

System which measures the total dis- System for manual adjustment of the

tance travelled by the vehicle during its brightness of the instruments and

life.

controls in relation to the exterior

brightness.

Deactivation

When the lights are off, or in day mode

on vehicles ﬁtted with daytime lights,

pressing the button does not have any

effect.

The total and trip distances are displayed

for thirty seconds when the ignition is

switched off, when the driver’s door is

opened and when the vehicle is locked

or unlocked.

Activation

When the lights are on:

 press the button to change the

brightness of the instruments and

controls,

Trip distance recorder

 when the lighting reaches the

minimum setting, release the button,

then press again to increase it,

System which measures a distance

travelled during a day or other period

until it is reset to zero by the driver.

or



when the lighting reaches the

maximum setting, release the button,

then press again to reduce it,

 when the lighting reaches the level

of brightness required, release the

button.

 With the ignition on, press the button

until zeros appear.

36

Download User Manual App

INSTRUMENTS and CONTROLS for Your Peugeot 308 4 Door First Genration (2007-2013)

Related Topics

Popular Owner Manuals

Latest Owner Manuals