INSTRUMENTS and CONTROLS
After driving for a few minutes, the tem-
perature and pressure in the cooling
system increase.
To top up the level:
wait for the engine to cool,
Manual Check
Coolant temperature indicator
System which informs the driver of the System which informs the driver of
warnings present and of the activated the changes in the temperature of the
or deactivated status of the functions.
engine coolant while driving.
unscrew the cap by two turns to
allow the pressure to drop,
when the pressure has dropped,
remove the cap,
top up the level to the "MAX" mark.
With the engine running, to start a
manual check, press the "CHECK/000"
button on the instrument panel.
With the engine running, when the
needle is:
If no "major" faults have been detected,
"CHECK OK" appears on the large instru-
ment panel display.
-
in zone A, the temperature is
correct,
-
in zone B, the temperature is
too high; the max temperature
warning light 1 and the central
STOP warning light come on,
accompanied by an audible signal
and a message on the multifunction
display.
If a "minor" fault has been detected, the
warning lights concerned then "CHECK
OK" appear on the large instrument
panel display. Consult a PEUGEOT
dealer.
You MUST stop as soon as it is safe
to do so.
Wait a few minutes before switching off
the engine.
Consult a PEUGEOT dealer.
If a "major" fault has been detected, only
the warning lights concerned appear on
the large instrument panel display. Have it
checked by a PEUGEOT dealer.
32
English 