Download User Manual App

Quickly access user manual for free!

Access -> Keyless Entry and Starting for Your Peugeot 308 4 Door Second Genration (2014-2020)

Access  
battery, etc. For more information on the Back-  
up procedures, refer to the corresponding  
section.  
With Keyless Entry and Starting  
Remote control and key  
Remote control function  
Integral key  
The key built into the remote control can be  
used for the following operations (depending  
on version):  
2
-
-
unlocking/locking/deadlocking the vehicle.  
activation/deactivation of the mechanical  
child lock.  
-
activation/deactivation of the front  
passenger airbag.  
F To eject the key or put it back in place, pull  
-
-
back-up door locking.  
switching on the ignition and starting/  
switching off the engine.  
and hold the button.  
The remote control can be used for the  
following functions, depending on version:  
Unlocking/locking is confirmed by rapid  
flashing of the direction indicators for  
approximately two seconds.  
-
-
-
-
-
unlocking/locking/deadlocking the vehicle,  
remote switching on of the lighting,  
activation/deactivation of the alarm,  
locating the vehicle,  
Without Keyless Entry and Starting  
At the same time, depending on your  
version, the door mirrors unfold/fold.  
If fitted to your vehicle, the alarm is  
deactivated when the vehicle is unlocked.  
vehicle immobiliser.  
The remote control includes a simple key that  
allows the central locking or unlocking of the  
vehicle using the door lock and starting and  
switching off the engine.  
Under normal operating conditions, it is  
preferable to use the remote control.  
F To unfold or fold the key, press the button.  
Back-up procedures allow the vehicle to be  
locked or unlocked in the event of a failure of  
the remote control, the central locking, the  
39  
Access  
F To unlock the other doors and the boot,  
Unlocking the vehicle  
Locating your vehicle  
press this button again.  
This function allows you to identify your vehicle  
from a distance, particularly in poor light. Your  
vehicle must be locked.  
With the remote control  
F Press one of these buttons to  
unlock the vehicle.  
Selective unlocking of the  
boot  
F Press this button.  
Complete unlocking is activated by default.  
This setting is done in the Vehicle/Driving  
menu, then Driving functions and Vehicle  
access.  
This will switch on the courtesy lamps and the  
direction indicators will flash for around ten  
seconds.  
With the key  
F Press this button to unlock the  
boot.  
F Turn the key in the driver's door lock  
towards the front of the vehicle to unlock.  
If fitted to your vehicle, the alarm is not  
deactivated. The opening of a door will trigger  
the alarm which will be stopped when the  
ignition is switched on.  
Remote operation of lighting  
Use this button for access to  
additional information.  
A short press on this button switches  
on the lighting remotely (sidelamps,  
dipped beam headlamps and number  
plate lamps).  
Locking the vehicle  
A second press before this time comes to an  
end cancels the remote operation of lighting.  
With the remote control  
Selective unlocking of the  
vehicle  
Complete unlocking is activated by default.  
This setting is done in the Vehicle/Driving  
menu, then Driving functions and Vehicle  
access.  
F Press this button to lock the  
vehicle completely.  
Deadlocking  
Maintaining the locking action (key or remote  
control) closes the windows automatically.  
Deadlocking renders the exterior and  
interior door controls inoperative.  
It also deactivates the manual central  
control button.  
Therefore, never leave anyone inside the  
vehicle when it is deadlocked.  
Use this button for access to  
additional information.  
With the key  
F Turn the key towards the rear of the  
vehicle to lock the vehicle completely.  
If your vehicle has an alarm, this will not be  
activated.  
With the remote control  
F To unlock the driver's door only,  
press this button once.  
40