Download User Manual App

Quickly access user manual for free!

app store
2014-2020 Peugeot 308 4 Door Instruments User Manual

MY CAR USER MANUAL

Instruments for Your Peugeot 308 4 Door Second Genration (2014-2020)

Eco-driving  
Eco-driving  
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.  
Unless it has automatic regulation, switch off  
the air conditioning as soon as the desired  
temperature has been reached.  
Switch off the demisting and defrosting controls  
when not required, if they are not automatically  
controlled.  
Optimise the use of your  
gearbox  
Drive smoothly  
Maintain a safe distance between vehicles,  
use engine braking rather than the  
With a manual gearbox, move off gently  
and change up without waiting. When  
accelerating, change up early.  
brake pedal, and press the accelerator  
progressively. These practices contribute  
towards a reduction in fuel consumption and  
CO2 emissions and also help reduce the  
background traffic noise.  
Switch off the heated seat as soon as possible.  
With an automatic or electronic gearbox,  
favour automatic mode and avoid pressing the  
accelerator pedal heavily or suddenly.  
Switch off the headlamps and foglamps when  
the ambient light level does not require their  
use.  
If your vehicle has cruise control, make use of  
the system at speeds above 25 mph (40 km/h)  
when the traffic is flowing well.  
The gear shift indicator invites you to engage  
the most suitable gear: as soon as the  
indication is displayed in the instrument panel,  
follow it straight away.  
Avoid running the engine before moving off,  
particularly in winter; your vehicle will warm up  
much faster while driving.  
For vehicles fitted with an electronic or  
automatic gearbox, this indicator appears only  
in manual mode.  
Control the use of your electrical  
equipment  
As a passenger, if you avoid connecting your  
multimedia devices (film, music, video game,  
etc.), you will contribute towards limiting the  
consumption of electrical energy, and so of  
fuel.  
Before moving off, if the passenger  
compartment is too warm, ventilate it by opening  
the windows and air vents before using the air  
conditioning.  
Above 31 mph (50 km/h), close the windows and  
leave the air vents open.  
Disconnect your portable devices before  
leaving the vehicle.  
Consider using equipment that can help keep  
the temperature in the passenger compartment  
down (sunroof blind, window blinds, etc.).  
6
Eco-driving  
.
Have your vehicle serviced regularly (engine  
Limit the causes of excess  
consumption  
Observe the recommendations  
on maintenance  
oil, oil filter, air filter, cabin filter, etc.) and  
observe the schedule of operations in the  
manufacturer's service schedule.  
Spread loads throughout the vehicle; place  
the heaviest items in the bottom of the boot,  
as close as possible to the rear seats.  
Limit the loads carried in the vehicle and  
reduce wind resistance (roof bars, roof rack,  
bicycle carrier, trailer, etc.). Preferably, use a  
roof box.  
Check the tyre pressures regularly, when cold,  
referring to the label in the door aperture,  
driver's side.  
With a BlueHDi Diesel engine, if the SCR  
system is faulty, your vehicle becomes  
polluting. Visit a PEUGEOT dealer or a  
qualified workshop as soon as possible to  
bring your vehicle’s nitrogen oxides emissions  
back in line with the regulations.  
Carry out this check in particular:  
-
-
-
before a long journey,  
at each change of season,  
after a long period out of use.  
Remove roof bars and roof racks after use.  
Do not forget the spare wheel and the tyres on  
any trailer or caravan.  
At the end of winter, remove snow tyres and  
refit your summer tyres.  
When filling the tank, do not continue after the  
3rd cut-off of the nozzle to avoid overflow.  
For vehicles fitted with it, avoid using the  
Dynamic Pack for too long, in order to limit  
your fuel consumption.  
At the wheel of your new vehicle, it is only  
after the first 1,900 miles (3,000 kilometres)  
that you will see the fuel consumption settle  
down to a consistent average.  
7
Instruments  
5. Service indicator, then total distance  
recorder (miles or km).  
Display screen  
Instrument panel  
These functions are displayed successively  
on switching on the ignition.  
Speedometer  
6. Trip distance recorder (miles or km).  
When travelling abroad, you may have  
to change the distance unit: the display  
of road speed must be in the official  
units (miles or km) for the country. The  
change of units is done via the screen  
configuration menu, with the vehicle  
stationary.  
With display screen 2:  
Analogue speedometer (mph or km/h).  
With display screen 1:  
Instrument panel display screen:  
-
-
-
-
-
-
-
Gear shift indicator.  
Coolant temperature and  
fuel level indicators  
State of the automatic gearbox.  
State of the speed limiter or cruise control.  
Speed limit sign.  
Total distance recorder.  
Trip distance recorder.  
Service spanner.  
According to the page selected with the control  
stalk (end of the wiper control stalk):  
1. Engine oil level indicator.  
2. Gear shift indicator.  
-
-
-
Digital speedometer.  
Trip computer.  
Dynamic vehicle parameters (Driver Sport  
Pack).  
State of the automatic gearbox.  
3. Digital speedometer (mph or km/h).  
4. Cruise control or speed limiter settings.  
-
-
-
Eco mode.  
Driving aids.  
Repeat of the navigation instructions.  
1. Fuel gauge.  
2. Engine coolant fluid temperature gauge.  
8
Instruments  
Temporary display:  
When the ignition is switched on  
Rev counter  
-
-
-
-
Service indicator (when the ignition is  
switched on).  
Oil level indicator (when ignition first  
switched on, depending on version).  
Range indicators related to the AdBlue and  
to the SCR system.  
1
Certain red or orange warning lamps come on  
for a few seconds when the ignition is switched  
on. These warning lamps should go off as soon  
as the engine is started.  
Persistent warning lamp  
Alert messages.  
When the engine is running or the vehicle is  
being driven, the illumination of a red or orange  
warning lamp indicates a fault that needs  
further investigation, using any associated  
message and the description of the warning  
lamp in the documentation.  
Control buttons  
Rev counter (x 1,000 rpm).  
Warning and indicator lamps  
Where a warning lamp remains lit  
Displayed as symbols, visual indicators  
which inform the driver of the occurrence of a  
malfunction (warning lamps) or of the operating  
status of a system (operation or deactivation  
indicator lamps). Certain lamps light up in  
two ways (fixed or flashing) and/or in several  
colours.  
The references (1), (2) and (3) in the warning  
and indicator lamp description indicate whether  
you should contact a qualified professional  
in addition to the immediate recommended  
actions.  
A. General lighting dimmer.  
B. Reset the trip distance recorder or the  
service indicator (according to context).  
(1): You must stop as soon as it is safe to do  
so and switch off the ignition.  
With display screen 2, pressing button  
B briefly enables a manual CHECK to be  
performed (reminder of service due date, the  
driving range for the AdBlue and the SCR  
system for BlueHDi versions and current  
alerts).  
Associated warnings  
(2): Contact a PEUGEOT dealer or a qualified  
workshop.  
The illumination of a lamp can be accompanied  
by an audible signal and/or a message  
displayed in a screen.  
(3): Go to a PEUGEOT dealer or a qualified  
workshop.  
Relating the type of alert to the operating status  
of the vehicle allows you to determine whether  
the situation is normal or a fault has occurred:  
refer to the description of each lamp for further  
information.  
9
Instruments  
List of warning and indicator lamps  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
Red warning/indicator lamps  
STOP  
Fixed, associated with Indicates a serious fault with the  
another warning lamp, engine, braking system, power  
Carry out (1) and then (2).  
accompanied by the  
display of a message  
and an audible signal.  
steering, automatic gearbox or a  
major electrical fault.  
Engine oil  
pressure  
Fixed.  
Fixed.  
There is a fault with the engine  
lubrication system.  
Carry out (1) and then (2).  
Brakes  
The brake fluid level has dropped  
significantly.  
Carry out (1), then top up with brake fluid that complies  
with the manufacturer's recommendations. If the  
problem persists, carry out (2).  
Fixed.  
The electronic brake force distribution Carry out (1) and then (2).  
(EBFD) system is faulty.  
+
Parking brake  
Fixed.  
The parking brake is applied or not  
properly released.  
Electric parking  
brake  
Flashing.  
The electric parking brake is not  
applied automatically.  
The application/release is faulty.  
Carry out (1) on level ground (horizontally).  
-
-
with a manual gearbox, with a gear engaged.  
with an automatic gearbox, with the lever in  
position P.  
Then carry out (2).  
10  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
1
Battery charge*  
Fixed.  
The battery charging circuit has a  
fault (dirty terminals, slack or cut  
alternator belt, etc.).  
Carry out (1).  
If the electric parking brake no longer works,  
immobilise the vehicle:  
F With a manual gearbox, engage a gear.  
F With the EAT6 automatic gearbox, move the gear  
selector to position P.  
F With the EAT8 automatic gearbox, put the chock  
against one of the wheels.  
Clean and retighten the terminals. If the warning lamp  
does not go off when the engine is started, carry out  
(2).  
Door(s) open  
Fixed, associated with If one of the doors or the boot is not  
a message identifying fully closed (speed below 6 mph  
the door.  
[10 km/h]).  
Fixed, associated with If one of the doors or the boot is not  
a message identifying fully closed (speed above 6 mph  
the door, together with [10 km/h]).  
an audible signal.  
Seat belt not  
fastened/  
unfastened  
Fixed or flashing  
accompanied by an  
audible signal.  
A seat belt has not been fastened or  
has been unfastened.  
Low fuel level  
Fixed, with the needle When it first comes on, there remains Refuel without delay to avoid running out of fuel.  
in the red zone.  
less than 6 litres of fuel in the tank.  
Never drive until completely empty, this could  
damage the emissions and injection systems.  
*
Depending on the country of sale.  
11  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
Orange warning/indicator lamps  
Engine self-  
diagnosis  
system  
Flashing.  
The engine management system has There is a risk that the catalytic converter will be  
a fault.  
destroyed. Carry out (2) without fail.  
Fixed.  
The emission control system has a  
fault.  
The warning lamp should go off when the engine is  
started. Carry out (3) quickly.  
Service  
Temporarily on.  
One or more minor faults have been  
Identify the cause of the fault using the message  
detected for which there is no specific displayed in the instrument panel.  
warning lamp.  
You can deal with certain anomalies yourself, for  
example an open door or the start of saturation of the  
particle filter.  
For any other problems, such as a fault with the tyre  
under-inflation detection system, carry out (3).  
Fixed.  
One or more major faults have been  
Identify the cause of the anomaly using the message  
detected for which there is no specific displayed in the instrument panel, then carry out (3).  
warning lamp.  
Fixed, accompanied  
by the message  
Automatic release of the electric  
parking brake is unavailable.  
Carry out (2).  
"Parking brake fault".  
Service warning lamp  
fixed and service  
spanner flashing then  
fixed.  
The servicing interval has been  
exceeded.  
Only with BlueHDi Diesel engines.  
Your vehicle must be serviced as soon as possible.  
+
12  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
1
Malfunction (with Fixed.  
electric parking  
brake)  
The electric parking brake has a fault. Carry out (3) quickly.  
Fixed, accompanied  
by the message  
"Parking brake fault".  
You can no longer immobilise the  
vehicle with the engine running.  
If manual application and release are not working, the  
electric parking brake control lever is faulty.  
The automatic functions must be used at all times and  
are automatically reactivated in the event of failure of  
the control lever.  
+
Carry out (2).  
Flashing, when the  
vehicle is started.  
The parking brake has not been  
properly released.  
Carry out (1) and try to completely release the parking  
brake using the control lever, with your foot on the  
brake pedal.  
+
+
If the problem persists, carry out (2).  
(1): You must stop as soon as it is safe to do  
so and switch off the ignition.  
(2): Contact a PEUGEOT dealer or a qualified  
workshop.  
(3): Go to a PEUGEOT dealer or a qualified  
workshop.  
13  
Instruments  
Warning/indicator lamp  
Malfunction (with  
State  
Cause  
Actions/Observations  
Fixed, accompanied by the  
The parking brake is not operating  
at maximum efficiency to ensure  
parking the vehicle in complete  
safety in all situations.  
Make your vehicle safe:  
F Park on a level surface.  
F With a manual gearbox, engage  
a gear.  
electric parking brake) message "Parking brake fault".  
+
F With an automatic gearbox, with  
P selected, place the supplied  
chocks against one of the  
wheels.  
+
+
Then carry out (2).  
Under-inflation  
Fixed, accompanied by an audible  
signal and a message.  
The pressure in one or more wheels Check the pressure of the tyres as  
is too low.  
soon as possible.  
Reinitialise the detection system  
after adjusting the pressure.  
Under-inflation warning lamp  
flashing then fixed and Service  
warning lamp fixed.  
The system is faulty: tyre pressures As soon as possible, check the  
are no longer monitored.  
pressure of the tyres and carry out  
(3).  
+
AdBlue®  
(access via the boot)  
Fixed, on switching on the ignition,  
accompanied by an audible signal  
and a message indicating the  
remaining driving range.  
The remaining driving range is  
between 1,500 and 375 miles  
(2,400 and 600 km).  
Top up the AdBlue® as soon as  
possible, or carry out (3).  
14  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
1
AdBlue®  
(access via the boot)  
AdBlue® warning lamp flashing  
and Service warning lamp fixed,  
accompanied by an audible signal  
and a message indicating the  
remaining driving range.  
The driving range is less than  
375 miles (600 km).  
You must top up the AdBlue® to  
avoid a breakdown, or carry out  
(3).  
+
AdBlue® warning lamp flashing  
and Service warning lamp fixed,  
accompanied by an audible signal  
and a message indicating that  
starting is prevented.  
The AdBlue® tank is empty: the  
starting inhibition system required  
by legislation prevents starting of  
the engine.  
To restart the engine, top up the  
AdBlue®, or carry out (2).  
It is essential to add at least 5 litres  
of AdBlue® to its tank.  
AdBlue®  
(access via the fuel  
filler flap)  
On for around 30 seconds when  
starting the vehicle, accompanied  
by a message indicating the  
remaining driving range.  
The remaining driving range is  
between 1,500 and 500 miles  
(2,400 and 800 km).  
Top up the AdBlue®.  
Fixed, on switching on the ignition,  
accompanied by an audible signal  
and a message indicating the  
remaining driving range.  
The remaining driving range is  
between 500 and 62 miles  
(800 and 100 km).  
Top up the AdBlue® as soon as  
possible, or carry out (3).  
Flashing, accompanied by an audible The driving range is less than  
You must top up the AdBlue® to  
avoid a breakdown, or carry out  
(3).  
signal and a message indicating the  
remaining driving range.  
62 miles (100 km).  
Flashing, accompanied by an  
audible signal and a message  
The AdBlue® tank is empty: the  
To restart the engine, top up the  
starting prevention system required AdBlue®, or carry out (2).  
indicating that starting is prevented. by legislation prevents starting of  
the engine.  
It is essential to add at least 5 litres  
of AdBlue® to its tank.  
15  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
SCR emissions  
control system  
Fixed when the ignition is switched  
on, accompanied by an audible signal control system has been detected.  
and a message.  
A fault with the SCR emissions  
This alert disappears once the  
exhaust emissions return to normal  
levels.  
+
AdBlue® warning lamp flashing, on  
switching on the ignition, associated  
with the fixed Service and engine  
Depending on the message  
displayed, you can continue driving  
for up to 685 miles (1,100 km) before  
Carry out (3) as soon as possible to  
avoid breaking down.  
+
diagnostic warning lamps, accompanied the engine starting prevention system  
by an audible signal and a message  
indicating the remaining driving range.  
is triggered.  
AdBlue® warning lamp flashing,  
on switching on the ignition,  
An engine immobiliser prevents  
the engine from restarting (over  
To restart the engine, carry out (2).  
associated with the fixed Service and the authorised driving limit after  
engine diagnostic warning lamps,  
accompanied by an audible signal  
and a message.  
confirmation of a fault with the  
emissions control system).  
Distance Alert/  
Active Safety  
Brake*  
Fixed, accompanied by a message.  
The system has been deactivated via  
the vehicle configuration menu.  
Flashing.  
The system is operating.  
The system has a fault.  
The vehicle brakes briefly so as to  
reduce the speed of collision with the  
vehicle ahead.  
Fixed, accompanied by a message  
and an audible signal.  
Carry out (3).  
*
Only with display screen 2.  
16  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
1
Diesel engine pre- Temporarily on.  
heating  
When switching on the ignition,  
if the weather conditions and  
the engine temperature make it  
necessary.  
Wait until the warning lamp goes off before starting.  
With the Keyless Entry and Starting system, when the  
warning lamp goes off, starting is immediate if you  
press and hold:  
-
-
the clutch pedal with a manual gearbox,  
the brake pedal with an automatic gearbox.  
If the engine does not start, switch the ignition off and  
then on, wait until the indicator lamp goes off again,  
then start the engine.  
Anti-lock braking  
system (ABS)  
Fixed.  
Fixed.  
The anti-lock braking system  
has a fault.  
The vehicle retains conventional braking.  
Drive carefully at moderate speed, then carry out (3).  
Dynamic stability  
control (DSC)  
and anti-slip  
With audio system or GT/GTi  
versions:  
The DSC/ASR systems have  
been disabled by a press of the  
disable button.  
These systems reactivate automatically above 31 mph  
(50 km/h), except the GT/GTi versions, as well as  
when the ignition is switched off.  
To reactivate them below 31 mph (50 km/h),  
depending on the version, press the button again or go  
to the Driving functions menu.  
regulation (ASR)  
With touch screen, except GT/  
GTi versions:  
The ASR system has been  
disabled via the Driving  
functions menu.  
(1): You must stop as soon as it is safe to do  
so and switch off the ignition.  
(2): Contact a PEUGEOT dealer or a qualified  
workshop.  
(3): Go to a PEUGEOT dealer or a qualified  
workshop.  
17  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
Dynamic stability Flashing.  
control (DSC)  
The DSC/ASR regulation is activated  
if there is a loss of grip or trajectory.  
and anti-slip  
regulation (ASR)  
Fixed.  
The DSC/ASR system has a fault.  
Carry out (3).  
Emergency  
Fixed, accompanied  
Emergency braking does not have full If automatic release is not available, use manual  
brake anomaly  
(with electric  
parking brake)  
by the message  
"Parking brake fault".  
power.  
release.  
+
Airbags  
Fixed.  
One of the airbags or seat belt  
pretensioners is faulty.  
Carry out (3).  
Front passenger Fixed.  
airbag (ON)  
The front passenger airbag is  
activated.  
The control is in the "ON" position.  
In this case, do NOT install a "rearward facing"  
child seat on the front passenger seat – Risk of  
serious injury!  
Front passenger Fixed.  
airbag (OFF)  
The front passenger airbag is  
deactivated.  
The control is in the "OFF" position.  
You can install a "rearward facing" child seat, unless  
there is a fault with the airbags (Airbags warning lamp  
on).  
(1): You must stop as soon as it is safe to do  
so and switch off the ignition.  
(2): Contact a PEUGEOT dealer or a qualified  
workshop.  
(3): Go to a PEUGEOT dealer or a qualified  
workshop.  
18  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
1
Deactivation of  
the automatic  
functions (with  
electric parking  
brake)  
Fixed.  
The "automatic application" (on  
switching off the engine) and  
"automatic release" functions are  
deactivated or faulty.  
In the event of a fault, illumination of  
this warning lamp is accompanied by  
a warning message.  
Carry out (3) if automatic application/release is no  
longer possible.  
The parking brake can be released manually.  
Automatic  
application (with by the message  
electric parking  
brake)  
Fixed, accompanied  
The automatic application is not  
available, the parking brake can only  
be used manually.  
Use the electric parking brake control lever.  
If automatic release is also not available, use manual  
release.  
"Parking brake fault".  
+
Malfunction (with Fixed, accompanied  
The parking brake is faulty: manual  
and automatic functions may not be  
working.  
When stationary, to immobilise your vehicle:  
F Pull and hold the control lever for approximately 7  
to 15 seconds, until the warning lamp comes on in  
the instrument panel.  
electric parking  
brake)  
by the message  
"Parking brake fault".  
+
+
If this procedure does not work, make your vehicle  
safe:  
F Park on a level surface.  
F With a manual gearbox, engage a gear.  
F With an automatic gearbox, select P, then put the  
supplied chock against one of the wheels.  
Then carry out (2).  
19  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
Active Lane  
Keeping  
Fixed.  
The system is deactivated or on  
standby.  
Assistance  
Flashing.  
You are about to cross a broken  
lane marking without operating the  
direction indicators.  
The system is activated, then corrects the trajectory  
on the side of the lane marking detected.  
Fixed, accompanied  
by the display of a  
message and an  
audible signal.  
The active lane keeping assistance  
system is faulty.  
Carry out (3).  
+
Rear foglamps  
Fixed.  
The lamps are on.  
Green warning/indicator lamps  
Automatic  
wiping  
Fixed.  
Automatic front wiping is activated.  
Stop & Start  
Fixed.  
When the vehicle stops, the Stop &  
Start puts the engine into STOP mode.  
Flashing temporarily.  
STOP mode is momentarily  
unavailable or START mode is  
automatically triggered.  
(1): You must stop as soon as it is safe to do  
so and switch off the ignition.  
(2): Contact a PEUGEOT dealer or a qualified  
workshop.  
(3): Go to a PEUGEOT dealer or a qualified  
workshop.  
20  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
1
Direction  
indicators  
Direction indicators  
with audible signal.  
The direction indicators are on.  
Sidelamps  
Fixed.  
Fixed.  
Fixed.  
The lamps are on.  
Dipped beam  
headlamps  
The lamps are on.  
Front foglamps  
The front foglamps are on.  
Automatic  
headlamp  
dipping  
Fixed.  
The function has been activated via  
the touch screen (Vehicle/Driving  
menu).  
+
The lighting control stalk is in the  
"AUTO" position.  
or  
Blue warning/indicator lamps  
Main beam  
headlamps  
Fixed.  
The lamps are on.  
21  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
Black/white warning/indicator lamps  
Foot on brake  
Fixed.  
Omission or insufficient pressure on  
the brake pedal.  
With an automatic gearbox, with the engine running,  
before releasing the parking brake, to move out of  
position P.  
With the EAT8 automatic gearbox, it may be  
necessary to press the brake pedal to unlock the  
gearbox from mode N.  
If you wish to release the parking brake without  
pressing the brake pedal, this warning lamp will  
remain on.  
Foot on clutch  
Fixed.  
Fixed.  
Stop & Start: the change to START  
mode is rejected because the clutch  
pedal is not fully depressed.  
Fully depress the clutch pedal.  
EAT8 automatic  
gearbox  
The EAT8 automatic gearbox is  
locked.  
The Unlock button must be pressed to unlock the  
gearbox.  
(1): You must stop as soon as it is safe to do  
so and switch off the ignition.  
(2): Contact a PEUGEOT dealer or a qualified  
workshop.  
(3): Go to a PEUGEOT dealer or a qualified  
workshop.  
22  
Instruments  
-
an alert message indicates the distance  
remaining, as well as the period before the  
next service is due or how long it is overdue.  
Resetting the service  
indicator  
Indicators  
Service indicator  
1
The service indicator must be reset after each  
service.  
If you have carried out the service on your  
vehicle yourself:  
The service indicator is displayed on the  
instrument panel. Depending on the vehicle  
version:  
The distance indicated (in miles or  
kilometres) is calculated according to the  
distance covered and the time elapsed  
since the last service.  
The alert may also be triggered close to a  
due date.  
F switch off the ignition,  
-
the distance recorder display line indicates  
the distance remaining before the next  
service is due, or the distance travelled  
since it was due preceded by the sign "-".  
Warning/indicator  
Actions/  
Observations  
State  
lamp  
Cause  
Service  
spanner  
Lights up temporarily  
when the ignition is  
switched on.  
Between 620 and 1,860 miles  
(1,000 and 3,000 km) remain  
before the next service is due.  
F press and hold the trip distance recorder  
reset button,  
F switch on the ignition; the distance recorder  
display begins a countdown,  
Fixed, when the  
ignition is switched on. less than 620 miles  
(1,000 km).  
The service is due in  
Have your vehicle  
serviced very soon.  
F when the display indicates "=0", release the  
button; the spanner disappears.  
Service  
spanner  
flashing  
Flashing then fixed,  
when the ignition is  
switched on.  
(With BlueHDi Diesel  
engines, associated  
with the Service  
warning lamp).  
The servicing interval  
has been exceeded.  
Have your vehicle  
serviced as soon as  
possible.  
If you have to disconnect the battery  
following this operation, lock the vehicle  
and wait at least 5 minutes for the reset to  
be registered.  
+
23  
Instruments  
-
in zone B, the temperature is too high;  
the maximum temperature and the  
central STOP warning lamps come on,  
accompanied by an audible signal and a  
warning message in the screen.  
Retrieving the service information  
Oil level correct  
(Only with display screen 2.)  
You can access the service information at any  
time.  
You MUST stop as soon as it is safe to do  
so.  
Wait a few minutes before switching off the  
engine.  
Oil level insufficient  
After first switching off the ignition, open  
the bonnet cautiously and check the  
coolant level.  
F Press the trip distance recorder reset  
button.  
For more information on Checking levels,  
The service information is displayed for a few  
seconds, then disappears.  
refer to the corresponding section.  
Engine coolant temperature  
gauge  
This is indicated by the flashing of "OIL" or the  
display of the "Oil level incorrect" message,  
accompanied by the Service warning lamp and  
an audible signal.  
If the low oil level is confirmed by a check using  
the dipstick, the level must be topped up to  
avoid damage to the engine.  
Engine oil level indicator  
With an electric oil level indicator, the state  
of the engine oil level is displayed in the  
instrument panel for a few seconds when the  
ignition is switched on, at the same time as the  
servicing information.  
For more information on Checking levels,  
refer to the corresponding section.  
The level read will only be correct if the  
vehicle is on level ground and the engine  
has been off for more than 30 minutes.  
With the engine running, when the needle is:  
-
in zone A, the temperature is correct,  
24  
Instruments  
an estimate of the distance that can be covered, the  
range, before engine starting is prevented.  
Oil level indicator fault  
With access via the boot  
Remaining range between 1,500 and 375 miles  
(2,400 and 600 km)  
1
When switching on the ignition, this warning lamp  
comes on, accompanied by an audible signal and  
the display of a message (e.g. "Top up AdBlue:  
Starting impossible in x miles") indicating the  
remaining range expressed in miles or kilometres.  
When driving, the message is displayed every  
185 miles (300 km) until the level is topped up.  
The reserve level has been reached; it is  
In the event of the risk of non-  
starting related to a lack of AdBlue®  
The engine starting prevention system  
required by regulations is activated  
automatically once the AdBlue® tank is  
empty.  
This is signalled by the flashing of "OIL_ _"  
or the display of the "Oil level measurement  
invalid" message. Consult a PEUGEOT dealer  
or a qualified workshop.  
recommended that you top up as soon as possible.  
Range greater than 1,500 miles (2,400 km)  
When the ignition is switched on, no  
information on range is displayed automatically.  
In the event of a fault with the electric  
indicator, the oil level is no longer  
monitored.  
Remaining range less than 375 miles (600 km)  
If the system is faulty, you must check the  
engine oil level using the manual dipstick  
located under the bonnet.  
For more information on Checking levels,  
refer to the corresponding section.  
When switching on the ignition, this warning  
lamp flashes, accompanied by the permanent  
lighting of the Service warning lamp, an audible  
signal and the display of a message (e.g. "Top up  
AdBlue: Starting impossible in x miles") indicating  
the remaining range expressed in miles or  
kilometres.  
Pressing this button temporarily displays the  
driving range*.  
AdBlue® range indicators  
When driving, this message is displayed every  
30 seconds until the AdBlue level has been  
topped up.  
It is essential to top up as soon as possible and  
before the tank is completely empty; otherwise it  
will not be possible to restart the engine after the  
next stop.  
These range indicators are present only on BlueHDi  
Diesel versions.  
Once the AdBlue® tank is on reserve or after detection  
of a fault with the SCR emissions control system,  
when the ignition is switched on, an indicator displays  
*
Only with display screen 2.  
25  
Instruments  
Breakdown related to a lack of AdBlue®  
in miles or kilometres.  
When driving, the audible signal and the  
message display are triggered every 6 miles  
(10 km) until the AdBlue tank is topped up.  
It is essential to top up as soon as possible and  
before the tank is completely empty; otherwise  
it will not be possible to restart the engine after  
the next stop.  
The reserve level has been reached; it is  
recommended that you top up as soon as  
possible.  
These messages are accompanied by the  
recommendation to not top up with more than  
10 litres of AdBlue.  
When switching on the ignition, this warning lamp  
flashes, along with the Service warning lamp,  
accompanied by an audible signal and the display of  
the message "Top up AdBlue: Starting impossible".  
Breakdown related to a lack of AdBlue®  
Remaining range between 500 and 62 miles (800 and 100 km)  
The AdBlue® tank is empty: the starting  
prevention system required by legislation  
prevents starting of the engine.  
When switching on the ignition, this warning lamp  
comes on, accompanied by an audible signal (1  
beep) and the display of a message (e.g. "Top up  
AdBlue: Starting impossible in x miles") indicating the  
remaining range expressed in miles or kilometres.  
When driving, the audible signal and the message  
display are triggered every 62 miles (100 km) until the  
fluid is topped up.  
When switching on the ignition, this warning  
lamp flashes, accompanied by an audible  
signal and the display of the message ""Top up  
AdBlue: Starting impossible".  
The AdBlue® tank is empty: the starting  
prevention system required by legislation  
prevents starting of the engine.  
To be able to restart the engine, it is  
essential to add at least 5 litres of AdBlue®  
to its tank.  
For more information on AdBlue®  
(BlueHDi engines), and, in particular,  
on topping up, refer to the corresponding  
section.  
It is essential to top up as soon as possible and before  
the tank is completely empty; otherwise it will not be  
possible to restart the engine after the next stop.  
To be able to restart the engine, it is  
essential to add at least 5 litres of AdBlue®  
to its tank.  
With access via the fuel filler flap  
Remaining range between 1,500 and  
500 miles (2,400 and 800 km)  
Remaining range less than 62 miles (100 km)  
For more information on AdBlue®  
(BlueHDi engines), and, in particular,  
on topping up, refer to the corresponding  
section.  
When switching on the ignition, this warning  
lamp flashes, accompanied by an audible signal  
(1 beep) and the display of a message (e.g.  
"Top up AdBlue: Starting impossible in x miles")  
indicating the remaining range expressed in miles  
or kilometres.  
When switching on the ignition, this warning lamp  
comes on for about 30 seconds, accompanied by  
an audible signal and the display of a message  
(e.g. "Top up AdBlue: Starting impossible in x  
miles") indicating the remaining range expressed  
26  
Instruments  
During the permitted driving phase  
(between 0 and 685 miles (0 and 1,100 km))  
In the event of a fault with the SCR  
emissions control system  
You have exceeded the authorised driving  
limit: the starting prevention system  
inhibits engine starting.  
1
A system that prevents engine starting is  
activated automatically from 685 miles  
(1,100 km) after confirmation of a fault with  
the SCR emissions control system.  
Have the system checked by a PEUGEOT  
dealer or a qualified workshop as soon as  
possible.  
To be able to start the engine, you must call on  
a PEUGEOT dealer or a qualified workshop.  
If a fault with the SCR system is confirmed  
(after 31 miles (50 km) covered with the  
permanent display of the message signalling  
a fault), these warning lamps come on and the  
AdBlue warning lamp flashes, associated with  
an audible signal and the display of a message  
(e.g. "Emissions fault: Starting prevented in  
200 miles) indicating the remaining range  
expressed in miles or kilometres.  
Distance recorders  
In the event of the detection of a fault  
While driving, the message is displayed every  
30 seconds while the fault with the SCR emissions  
control system persists.  
The alert is repeated when switching on the  
ignition.  
You should go to a PEUGEOT dealer or a qualified  
workshop as soon as possible.  
These warning lamps come on, accompanied  
by an audible signal and the display of the  
message "Emissions fault".  
The total and trip distances are displayed for  
thirty seconds when the ignition is switched off,  
when the driver's door is opened and when the  
vehicle is locked or unlocked.  
The alert is triggered when driving when the  
fault is detected for the first time, then when  
switching on the ignition for subsequent  
journeys, while the fault persists.  
Otherwise you will not be able to restart the vehicle.  
Starting prevented  
When travelling abroad, you may need  
to change the unit of distance: the speed  
display must be expressed in the official  
units of the country (km or miles). The  
change of units is done via the screen  
configuration menu, with the vehicle  
stationary.  
Each time the ignition is switched on, these  
warning lamps come on and the AdBlue  
warning lamp flashes, accompanied by an  
audible signal and the display of the message  
"Emissions fault: Starting prevented".  
If it is a temporary fault, the alert  
disappears during the next journey, after  
self-diagnosis of the SCR system.  
27  
Instruments  
Total distance recorder  
It measures the total distance travelled by the  
vehicle since its first registration.  
Instrument panel  
Trip computer  
Information displayed about the current journey  
(range, current fuel consumption, average fuel  
consumption, etc.).  
Trip distance recorder  
Data displays  
With display screen 1 and the audio system:  
It measures the distance travelled since it was  
reset by the driver.  
With the exterior lighting on, press this button  
to adjust the brightness of the dashboard  
lighting, the touch screen and the ambient  
lighting. Release the button when the desired  
level is reached.  
With display screen 2:  
Touch screen  
F With the ignition on, press the button until  
zeroes appear.  
Lighting dimmer  
For the manual adjustment of the brightness of  
the instrument panel and the touch screen.  
Operates only when the vehicle's exterior  
lighting is on.  
F Press on the Vehicle/Driving menu.  
F In this menu, select the Vehicle settings  
tab, then Comfort lighting.  
F Adjust the brightness (only for the touch  
screen) by pressing on the "+" or "-" buttons.  
28  
Instruments  
The current information tab with:  
For example, trip 1 can be used for daily figures  
and trip 2 for monthly figures.  
F Press this button, located on the end of the  
wiper control stalk, to display the different  
tabs in turn.  
-
-
-
the range,  
the current fuel consumption,  
the Stop & Start time counter.  
1
-
The current information tab with:  
With display screen 1 and the touch screen:  
Information is accessible from the "Vehicle/  
Driving" menu.  
•
•
•
the range,  
the current fuel consumption,  
the Stop & Start time counter.  
The trip 1 tab with:  
-
•
•
•
Trip 1 with:  
-
-
-
the distance travelled,  
the average fuel consumption,  
the average speed for the first  
trip.  
the average speed,  
the average fuel consumption,  
the distance travelled,  
for the first trip.  
The trip 2 tab with:  
-
•
•
•
Trip 2 with:  
-
-
-
the distance travelled,  
the average fuel consumption,  
the average speed for the  
second trip.  
the average speed,  
the average fuel consumption,  
the distance travelled,  
for the second trip.  
Permanent display:  
Reset trip  
F Select the "Vehicle/Driving" menu.  
F In this menu, select the "Driving functions"  
tab.  
Reset trip  
The information of the trip computer is  
displayed in the primary page of the menu.  
F Press one of the buttons to display the  
desired tab.  
Temporary display in a specific window:  
F Press the end of the wiper control stalk for  
access to the information and to display the  
different tabs.  
F When the required trip is displayed, press  
the button on the end of the wiper control  
stalk for more than two seconds.  
Trips 1 and 2 are independent but their use is  
identical.  
F When the desired trip is displayed, press  
the reset button or the end of the wiper  
control stalk.  
29  
Instruments  
Trips 1 and 2 are independent but their use is  
identical.  
For example, trip 1 can be used for daily figures  
and trip 2 for monthly figures.  
Current fuel consumption  
Monochrome screen C  
Displays in the screen  
(mpg or km/l or l/100 km)  
Calculated during the last few  
seconds.  
This displays the following information:  
-
-
-
the time,  
the date,  
This function is only displayed from  
19 mph (30 km/h).  
Trip computer, some  
definitions  
Range  
the exterior temperature (this flashes if  
there is a risk of ice),  
-
-
-
-
-
-
parking sensor information,  
the audio source being listened to,  
telephone or hands-free kit information,  
the trip computer,  
alert messages,  
settings menus for the screen and the  
vehicle equipment.  
Average fuel consumption  
(mpg or km/l or l/100 km)  
Calculated since the last time the  
trip recorder was reset to zero.  
(miles or km)  
The distance which can still be  
travelled with the fuel remaining in  
the tank (related to the average fuel  
consumption over the last few miles  
(kilometres) travelled).  
Average speed  
(mph or km/h)  
Calculated since the last time the  
trip recorder was reset to zero.  
Controls  
This value may fluctuate if a change  
of driving style or terrain results in a  
significant change in the current fuel  
consumption.  
Distance travelled  
(miles or km)  
Calculated since the last time the  
trip recorder was reset to zero.  
Dashes are displayed when the range falls  
below 19 miles (30 km). After filling with at least  
5 litres of fuel, the range is recalculated and is  
displayed if it exceeds 62 miles (100 km).  
Stop & Start time counter  
From the control panel of your audio system,  
you can press:  
F button A to chooses between the display  
of audio information in full screen or the  
shared display of audio and trip computer  
information,  
If dashes are displayed continuously while  
driving in place of the digits, contact a  
PEUGEOT dealer or a qualified workshop.  
(minutes/seconds or hours/  
minutes)  
A time counter calculates the time  
spent in STOP mode during a  
journey.  
It resets to zero every time the  
ignition is switched on.  
30  
Instruments  
For more information on the "Multimedia"  
menu, refer to the Audio equipment and  
telematics section.  
player) to be connected or disconnected and  
the connection mode to be defined (hands-free,  
playing audio files).  
For more information on the "Bluetooth  
connection" menu, refer to the Audio  
equipment and telematics section.  
F the "MENU" button to access the main  
menu,  
1
F the "5" or "6" buttons to scroll through the  
items in the screen,  
F the "7" or "8" buttons to change a setting  
"Telephone" menu  
value,  
F the "OK" button to confirm,  
or  
"Personalisation-  
F the "Back" button to abandon the operation  
With the audio system switched on, this menu  
allows you to make a call or view the various  
telephone directories.  
For more information on the "Telephone" menu,  
refer to the Audio equipment and telematics  
section.  
configuration" menu  
in progress.  
Main menu  
F Press the "MENU" button for access to the  
This menu gives access to the following  
functions:  
main menu:  
-
-
-
-
-
"Multimedia",  
"Telephone",  
"Trip computer",  
"Bluetooth connection",  
"Personalisation-configuration".  
-
-
"Define the vehicle parameters",  
"Display configuration".  
"Trip computer" menu  
Define the vehicle parameters  
This menu allows you to activate or deactivate  
the following equipment, classified in different  
categories:  
F Press the "7" or "8" button to select the  
menu required, then confirm by pressing the  
"OK" button.  
This menu allows you to consult information  
concerning the status of the vehicle.  
-
"Access to the vehicle":  
Diagnosis  
Summarises the alert messages of various  
functions.  
•
"Plip action" (Selective unlocking of the  
driver's door).  
"Multimedia" menu  
-
"Driving assistance":  
•
•
•
"Tyre inflation" (Under-inflation detection  
system),  
"Rear wipe in reverse gear" (Rear wiper  
linked to reverse gear),  
"Bluetooth connection"  
menu  
With the audio system switched on, this  
menu allows you to activate or deactivate the  
functions associated with use of the radio  
(RDS, DAB / FM auto tracking, RadioText  
(TXT) display) or to choose the media play  
mode (Normal, Random, Random all, Repeat).  
"Parking assistance".  
With the audio system switched on, this menu  
allows a Bluetooth device (telephone, media  
31  
Instruments  
and, depending on equipment, allows:  
Display configuration  
After a few moments with no action on the  
second page, the first page is displayed  
automatically.  
-
access to the navigation system controls  
and the display of associated information.  
This menu gives access to the following  
settings:  
-
-
-
-
"Choice of units",  
To deactivate or activate a function, select  
"OFF" or "ON".  
"Date and time adjustment",  
"Personalise display",  
"Language".  
For safety reasons, the vehicle must  
always be stationary for the driver to  
perform operations that require close  
attention.  
Some functions are not accessible when  
driving.  
Use this button to adjust the settings  
for a function.  
For safety reasons, configuration of  
the multifunction screen by the driver  
must only be done when the vehicle is  
stationary.  
Use this button for access to  
additional information on the  
function.  
General operation  
Recommendations  
Use this button to confirm.  
Touch screen  
This screen is of the capacitive type.  
Use is possible in all temperatures.  
Do not use pointed objects on the touch  
screen.  
Do not touch the touch screen with wet hands.  
Use a soft clean cloth to clean the touch  
screen.  
This system gives access to:  
-
the permanent display of the time and  
the exterior temperature (a blue symbol  
appears when there is a risk of ice),  
the heating/air conditioning controls,  
menus for adjusting settings for vehicle  
functions and systems,  
Use this button to return to the  
previous page.  
-
-
Menus  
-
-
audio system and telephone controls and  
the display of associated information,  
the display of visual parking aids (visual  
parking sensor information, Park Assist,  
etc.),  
Design  
Use the buttons below the touch screen to  
access the menus, then press the virtual  
buttons in the touch screen.  
Some menus may display across two pages:  
press the "OPTIONS" button to access the  
second page.  
-
Internet services and the display of  
associated information.  
32  
Instruments  
Radio Media.  
Volume adjustment/mute.  
See the "Audio equipment and  
telematics" section.  
See the "Audio equipment and telematics" section.  
1
Air conditioning.  
Allows control of the settings for  
temperature, air flow, etc.  
Upper bar  
Certain information is always displayed in the  
upper bar of the touch screen:  
Connected Navigation or Mirror Screen*.  
See the "Audio equipment and telematics"  
section.  
-
-
-
Time and exterior temperature (a blue  
warning lamp appears when there is a risk  
of ice).  
Summary of the air conditioning information,  
and direct access to the corresponding  
menu.  
Summary of information from the Radio  
Media, Telephone menus and navigation  
instructions*.  
Vehicle or Driving*.  
Allows the activation, deactivation and  
adjustment of settings for certain functions.  
The functions accessible from this menu are  
arranged under two tabs: "Vehicle settings"  
and "Driving functions".  
-
-
Notifications.  
Telephone.  
Access to the Settings for the touch screen  
and the digital instrument panel (date/time,  
languages, units, etc.).  
See the "Audio equipment and telematics" section.  
Applications.  
Allows the display of available  
connected services and access to  
the Eco-coaching function.  
You can also press with three fingers on  
the touch screen to show all of the menu  
buttons.  
*
Depending on equipment  
*
Depending on equipment  
33  
Instruments  
PEUGEOT Connect Radio  
Vehicle/Driving menu  
"Vehicle settings" tab  
Families  
Functions  
-
-
"Guide-me-home lighting": activation/deactivation of automatic guide-  
me-home lighting.  
"Welcome lighting": activation/deactivation of exterior welcome lighting.  
"Headlamps"  
-
-
"Rear wiper in reverse": activation/deactivation of the rear wiper on with  
reverse gear.  
"Ambient lighting": activation/deactivation of ambient lighting and  
adjustment of brightness.  
"Comfort"  
"Vehicle access"  
"Security"  
-
-
"Unlock: driver's door only": activation/deactivation of selective unlocking  
of the driver’s door.  
"Unlock: boot only": activation/deactivation of selective unlocking of the  
tailgate.  
-
-
-
"Collision risk alert": activation/deactivation of the distance alert and  
automatic emergency braking.  
"Recommended speed display": activation/deactivation of speed limit  
sign recognition.  
"Fatigue Detection System": activation/deactivation of the driver fatigue  
detection system.  
34  
Instruments  
For more information on one of these  
PEUGEOT Connect Nav  
1
functions, refer to the corresponding  
section.  
Families  
Functions  
-
-
"Rear wiper in reverse": activation/deactivation of the rear wiper on with  
reverse gear.  
"Guide-me-home lighting": activation/deactivation of automatic guide-  
me-home lighting.  
"Comfort lighting"  
-
-
"Welcome lighting": activation/deactivation of exterior welcome lighting.  
"Ambient lighting": activation/deactivation of ambient lighting and  
adjustment of brightness.  
-
-
"Unlock: driver's door only": activation/deactivation of selective unlocking  
of the driver’s door.  
"Unlock: boot only": activation/deactivation of selective unlocking of the  
tailgate.  
"Vehicle access"  
"Security"  
-
-
-
"Collision risk alert": activation/deactivation of the distance alert and  
automatic emergency braking.  
"Recommended speed display": activation/deactivation of speed limit  
sign recognition.  
"Fatigue Detection System": activation/deactivation of the driver fatigue  
detection system.  
35  

Related Topics

Instrument panel
Warning and indicator lamps
Indicators
Distance recorders
Lighting dimmer
Trip computer
Monochrome screen C
Touch screen

Popular Owner Manuals

Audi
BMW
Citroen
Ford
Honda
Peugeot

Latest Owner Manuals

Third Genration (2021-2025) Peugeot 308 4 Door
Second Genration (2014-2020) Peugeot 308 4 Door
First Genration (2007-2013) Peugeot 308 4 Door
Third Generation (2014-2025) Peugeot Boxer Van
Third Generation (2015-2023) Peugeot Partner Van
Second Generation (2019-2025) Peugeot 2008 SUV