Download User Manual App

Quickly access user manual for free!

Instruments -> Distance recorders for Your Peugeot 308 4 Door Second Genration (2014-2020)

Instruments  
During the permitted driving phase  
(between 0 and 685 miles (0 and 1,100 km))  
In the event of a fault with the SCR  
emissions control system  
You have exceeded the authorised driving  
limit: the starting prevention system  
inhibits engine starting.  
1
A system that prevents engine starting is  
activated automatically from 685 miles  
(1,100 km) after confirmation of a fault with  
the SCR emissions control system.  
Have the system checked by a PEUGEOT  
dealer or a qualified workshop as soon as  
possible.  
To be able to start the engine, you must call on  
a PEUGEOT dealer or a qualified workshop.  
If a fault with the SCR system is confirmed  
(after 31 miles (50 km) covered with the  
permanent display of the message signalling  
a fault), these warning lamps come on and the  
AdBlue warning lamp flashes, associated with  
an audible signal and the display of a message  
(e.g. "Emissions fault: Starting prevented in  
200 miles) indicating the remaining range  
expressed in miles or kilometres.  
Distance recorders  
In the event of the detection of a fault  
While driving, the message is displayed every  
30 seconds while the fault with the SCR emissions  
control system persists.  
The alert is repeated when switching on the  
ignition.  
You should go to a PEUGEOT dealer or a qualified  
workshop as soon as possible.  
These warning lamps come on, accompanied  
by an audible signal and the display of the  
message "Emissions fault".  
The total and trip distances are displayed for  
thirty seconds when the ignition is switched off,  
when the driver's door is opened and when the  
vehicle is locked or unlocked.  
The alert is triggered when driving when the  
fault is detected for the first time, then when  
switching on the ignition for subsequent  
journeys, while the fault persists.  
Otherwise you will not be able to restart the vehicle.  
Starting prevented  
When travelling abroad, you may need  
to change the unit of distance: the speed  
display must be expressed in the official  
units of the country (km or miles). The  
change of units is done via the screen  
configuration menu, with the vehicle  
stationary.  
Each time the ignition is switched on, these  
warning lamps come on and the AdBlue  
warning lamp flashes, accompanied by an  
audible signal and the display of the message  
"Emissions fault: Starting prevented".  
If it is a temporary fault, the alert  
disappears during the next journey, after  
self-diagnosis of the SCR system.  
27  
Instruments  
Total distance recorder  
It measures the total distance travelled by the  
vehicle since its first registration.  
Instrument panel  
Trip computer  
Information displayed about the current journey  
(range, current fuel consumption, average fuel  
consumption, etc.).  
Trip distance recorder  
Data displays  
With display screen 1 and the audio system:  
It measures the distance travelled since it was  
reset by the driver.  
With the exterior lighting on, press this button  
to adjust the brightness of the dashboard  
lighting, the touch screen and the ambient  
lighting. Release the button when the desired  
level is reached.  
With display screen 2:  
Touch screen  
F With the ignition on, press the button until  
zeroes appear.  
Lighting dimmer  
For the manual adjustment of the brightness of  
the instrument panel and the touch screen.  
Operates only when the vehicle's exterior  
lighting is on.  
F Press on the Vehicle/Driving menu.  
F In this menu, select the Vehicle settings  
tab, then Comfort lighting.  
F Adjust the brightness (only for the touch  
screen) by pressing on the "+" or "-" buttons.  
28