Download User Manual App

Quickly access user manual for free!

Lighting and visibility -> Guide-me-home lighting for Your Peugeot 308 4 Door Second Genration (2014-2020)

Lighting and visibility  
Switching off  
The manual guide-me lighting goes off  
automatically at the end of a given period of time.  
The system may suffer interference or not  
work correctly:  
Clean the windscreen regularly,  
particularly the area in front of the camera.  
The internal surface of the windscreen can  
also become misted around the camera.  
In humid and cold weather, demist the  
windscreen regularly.  
Do not allow snow to accumulate on the  
bonnet or roof of the vehicle as this could  
conceal the detection camera.  
-
under poor visibility conditions (snow,  
heavy rain, etc.),  
Automatic  
-
if the windscreen is dirty, misted or  
obscured (by a sticker, etc.) in front of  
the camera,  
When the automatic illumination of headlamps  
function is activated (lighting control stalk  
in the "AUTO" position), under low ambient  
light the dipped beams headlamps come on  
automatically when the ignition is switched off.  
-
if the vehicle is facing highly reflective  
signs.  
When the system detects thick fog, it  
temporarily deactivates the function.  
The system is not able to detect:  
Activation or deactivation, as well as  
the duration of the guide-me-home  
lighting, is set in the Vehicle/Driving  
menu, then Comfort lighting and  
Guide-me-home lighting.  
-
road users that do not have their own  
lighting, such as pedestrians,  
vehicles whose lighting is obscured  
(for example: vehicles running behind a  
safety barrier on a motorway),  
vehicles at the top or bottom of a  
steep slope, on winding roads, on  
crossroads.  
Guide-me-home lighting  
-
Manual  
-
Exterior welcome lighting  
The remote operation of the lighting makes  
your approach to the vehicle easier in poor  
light. It is activated when the lighting control  
stalk is in the "AUTO" position and the level of  
light detected by the sunshine sensor is low.  
Temporarily keeping the dipped beam  
headlamps on after the vehicle's ignition has  
been switched off makes the driver's exit easier  
when the light is poor.  
Switching on  
Switching on  
F
Press the open padlock on  
the remote control or one of  
the front door handles with the  
"Keyless Entry and Starting"  
system.  
F With the ignition off, "flash" the headlamps  
using the lighting control stalk.  
F A further "headlamp flash" switches the  
function off.  
78