Lighting and visibility
0
-
Driver or driver + front passenger.
With manual wiping (intermittent)
Wiper control stalk
Driver + front passenger + rear
passengers.
1
-
5 people.
Programming
5 people + loads in the boot.
Driver + loads in the boot.
Your vehicle may also include some functions
that can be configured:
2
-
-
automatic windscreen wipers,
rear wiping on engaging reverse gear.
The initial setting is position "0".
With AUTO wiping
Automatic adjustment of
"Full LED" technology
headlamps
This system automatically adjusts the height
of the beams from this type of headlamp,
according to the load in the vehicle, to avoid
causing a nuisance to other road users.
In wintry conditions, remove snow, ice or
frost present on the windscreen, around
the wiper arms and blades and the
windscreen seal, before operating the
wipers.
Front wipers
Raise or lower the control stalk to the desired
position to change the wiping speed.
Do not operate the wipers on a dry
windscreen. Under extremely hot or cold
conditions, ensure that the wiper blades
are not stuck to the windscreen before
operating the wipers.
If a fault occurs, this warning lamp
comes on in the instrument panel,
accompanied by a message and an
audible signal.
Fast wiping (heavy rain).
The system then places the headlamp beams
in the lowest position.
Have the system checked by a PEUGEOT
dealer or a qualified workshop.
Normal wiping (moderate rain).
Manual controls
Intermittent wiping (proportional to
the speed of the vehicle).
Do not touch the "Full LED" technology
headlamps. Risk of electrocution!
Off.
The wipers are controlled directly by the driver.
80
English 