Get In the event of a breakdown -> Temporary puncture repair kit Guide for Peugeot 308 4 Door 2021-2025

In the event of a breakdown

The jack must only be used to change a

wheel with a damaged or punctured tyre.

Do not use any jack other than the one

supplied with the vehicle.

If the vehicle does not have its original jack,

contact a PEUGEOT dealer or a qualiﬁed

workshop to obtain the one that was intended

by the manufacturer.

For more information on Towing the vehicle

and using the removable towing eye, refer to the

corresponding section.

5. Wheelbrace

For removing the wheel bolts.

6. Jack with integrated handle

To raise the vehicle.

7. Wheel bolt cap removal tool (depending on

equipment)

With temporary puncture repair kit

For removing the wheel trim from steel

wheels or the central bolt cover from alloy

wheels.

The jack meets European standards, as

deﬁned in the Machinery Directive 2006/42/

CE.

For more information on the Spare wheel, refer

to the corresponding section.

The jack does not require any maintenance.

Temporary puncture

repair kit

List of tools

4. 12 V compressor with cartridge of sealant

and speed limit sticker

For temporary repair of a tyre and to adjust

the tyre pressure.

Scan the QR Code on page 3 to view

explanatory videos.

For more information about the Temporary

puncture repair kit, refer to the corresponding

section.

Made up of a compressor and a sealant

cartridge, it allows you to carry out a temporary

repair of the tyre so that you can drive to the

nearest garage.

With spare wheel

1. Chock to immobilise the vehicle (depending

on equipment)

It is designed to repair most punctures located

on the tyre tread.

2. Socket for the security bolts (located in the

glove box) (depending on equipment)

To adapt the wheelbrace to the special

‘security’ bolts.

The vehicle's electric system allows the

connection of the compressor to the 12 V

power supply for long enough to repair a tyre

after a puncture.

3. Removable towing eye

181

In the event of a breakdown

Only the 12 V socket located at the front

of the vehicle can be used to power the

compressor.

jacket, etc.) according to the legislation in force

in the country in which you are driving.

► Switch the ignition oﬀ.

► Uncoil the pipe stowed under the compressor.

For more information on the Tool kit,

refer to the corresponding section.

Tyre inﬂation pressures are indicated on

this label.

For more information on Identiﬁcation

markings, particularly this label, refer to the

corresponding section.

► Connect the hose from the bottle of sealant

to the valve of the tyre to be repaired and tighten

ﬁrmly.

► Check that the compressor switch is in

position "O".

► Fully uncoil the electric cable stowed under

the compressor.

► Connect the pipe from the compressor to the

bottle of sealant.

Should the pressure of one or more tyres

be adjusted, it is necessary to reinitialise

the under-inﬂation detection system.

► Connect the compressor's electric plug to the

vehicle's 12 V socket.

For more information on Tyre under-inﬂation

detection, refer to the corresponding section.

► Aﬃx the speed limit sticker.

Repair procedure

The speed limit sticker must be aﬃxed

inside the vehicle in the area close to the

driver, to remind them that a wheel is in

temporary use.

Do not remove any foreign body

(e.g. nail, screw) which has penetrated

the tyre.

► Turn the bottle of sealant over and secure it

in the notch provided on the compressor.

► Remove the valve cap from the tyre to be

repaired, and place it in a clean place.

► Park the vehicle without obstructing traﬃc

and apply the parking brake.

► Follow the safety instructions (hazard

warning lamps, warning triangle, high visibility

► Switch the ignition on.

182

In the event of a breakdown

After use, do not discard the bottle into the

environment; take it to a PEUGEOT dealer or

an authorised waste disposal site.

Do not forget to obtain a new bottle of

sealant, available from a PEUGEOT dealer or

a qualiﬁed workshop.

Checking/adjusting tyre

pressures

The compressor can be used, without injecting

sealant, to check and, if necessary, adjust the

tyre pressures.

► Switch on the compressor by moving the

switch to position "I" until the tyre pressure

reaches 2 bar. The sealant product is injected

under pressure into the tyre; do not disconnect

the pipe from the valve during this operation (risk

of blowback).

► Remove the valve cap from the tyre and keep

it in a clean place.

► Uncoil the pipe stowed under the compressor.

► Screw the pipe onto the valve and tighten

ﬁrmly.

► Check that the compressor switch is in

position "O".

► Fully uncoil the electric cable stowed under

the compressor.

► Connect the compressor's electric plug to the

vehicle's 12 V socket.

► Switch the ignition on.

► Start the compressor by placing the switch at

position "I" and adjust the pressure to the value

shown on the vehicle's tyre pressure label. To

deﬂate: press the black button located on the

compressor pipe, near the valve connection.

If after approximately 7 minutes, the

pressure of 2 bar is not reached, this

indicates that the tyre is not repairable;

contact a PEUGEOT dealer or a qualiﬁed

workshop for assistance.

► Drive immediately for approximately 3 miles

(5 kilometres) at reduced speed (between

12 and 37 mph (20 and 60 km/h)) to plug the

puncture.

► Stop to check the repair and the tyre

pressure using the kit.

► Move the switch to position "O".

► Disconnect the compressor's electric plug

from the vehicle's 12 V socket.

► Remove the kit.

► Reﬁt the cap on the valve.

With a tyre repaired using this type of kit,

do not exceed a speed of 50 mph

(80 km/h) and do not drive more than

50 miles (80 km).

You must contact a PEUGEOT dealer or a

qualiﬁed workshop to have the repair checked

and the tyre changed.

► Remove and store the bottle of sealant.

If after 7 minutes the pressure of 2 bar is

not reached, the tyre is damaged;

contact a PEUGEOT dealer or a qualiﬁed

workshop for assistance.

The sealant product is harmful if

swallowed and causes irritation to the

eyes.

Keep this product out of the reach of children.

The use-by date of the ﬂuid is marked on the

bottle.

► Once the correct pressure is reached, put the

switch in position "O".

► Remove the kit and stow it.

► Reﬁt the cap on the valve.

183

Download User Manual App

In the event of a breakdown -> Temporary puncture repair kit for Your Peugeot 308 4 Door 2021-2025

Related Topics

In the event of a breakdown

Popular Owner Manuals

Latest Owner Manuals