Get Instruments Guide for Peugeot 308 4 Door 2021-2025

Instruments

Choice of the displayed page

Matrix display

Driver information

Instrument panel

The instrument panel displays all the information

the driver needs about the status of the vehicle's

various systems.

This information appears in the form of warning

and indicator lamps and messages.

Depending on the vehicle's equipment, the

instrument panel may be either:

– Analogue dials with an LCD or matrix display.

– A fully digital display.

► Press the button located at the end of the

lighting control stalk to scroll through the diﬀerent

pages.

The matrix display can be personalised using a

system of pages.

1. Cruise control/speed limiter settings

Display of speed limit signs

2. Gear shift indicator (arrow and recommended

gear)

Selector position and gear on automatic

gearbox

3. Personalisable area:

The new page is applied immediately.

Matrix instrument panel

Digital instrument panels

Digital instrument panels are of the head-up or

3D head-up type.

They can be personalised using a system of

pages and widgets.

Depending on the page displayed, certain

information is not displayed or is presented

diﬀerently.

Dials

– Digital speedometer (mph or km/h)

– Trip computer information

– Road signs recognition

1. Coolant temperature indicator (°C)

2. Analogue speedometer (mph or km/h)

3. Matrix display

4. Rev counter (x 1,000 rpm), graduation

depends on the engine (Petrol or Diesel)

5. Fuel gauge

– Display of driving aids

– Fatigue detection system

4. Service indicator, then total distance recorder

(miles or km)

These functions are displayed in turn when

the ignition is switched on.

Driving mode selected (other than "Normal"

mode)

10

Instruments

The information listed in the personalisation

page is as follows:

– Energy ﬂows (Rechargeable hybrid).

– Current media.

1

– Driving aids.

– Navigation (depending on equipment).

– Engine temperatures (Petrol or Diesel).

– Rev counter (Petrol or Diesel).

Information displayed on

the instrument panel

The information displayed on the instrument

panel (e.g. warning lamps, indicators) may have

a ﬁxed or variable location depending on the

page or the driving aid activated.

For the functions that have indicator lamps for

both operation and deactivation, there is only

one dedicated location.

► Press the button located at the end of the

lighting control stalk to scroll through the diﬀerent

pages.

1. Coolant temperature indicator (°C) (Petrol or

Diesel)

The new page is applied immediately.

Total distance recorder (miles or km) (Petrol

or Diesel)

Battery charge level and remaining range

(miles or km) indicator (Rechargeable hybrid)

2. Gear shift indicator (arrow and recommended

gear)

Selector position and gear on automatic

gearbox

Speedometer (mph or km/h)

3. Display of speed limit signs

Driving aid in reduced display (if the function

is activated)

4. Rev counter (rpm) (Petrol or Diesel)

Driving mode selected (other than "Normal"

mode)

Power indicator (Rechargeable hybrid)

READY indicator lamp (Rechargeable hybrid)

5. Fuel gauge and remaining range (miles or

km)

When a message is displayed in a

temporary window, pressing this button

will cause this window to disappear

immediately.

Settings for displayed pages

Display language and units

These depend on the touch screen

settings.

When travelling abroad, the speed must be

shown in the oﬃcial units of the country you

are driving in (mph, miles or km/h, km).

The available settings operations are: addition,

deletion and layout of pages and widgets.

It is possible to memorise up to 5 pages.

Each page may contain 1 or 2 widgets:

– With 1 widget, large display in central position.

– With 2 widgets, reduced display in side

position.

The colour for each driving mode may be

personalised. A default setting is suggested.

The setting also matches the interior ambient

lighting (depending on availability).

Choice of the displayed page

By default, pages are memorised in the

instrument panel.

11

Instruments

The settings are changed via the

Settings > Customisation touch screen

application.

For more information on a system or a function,

refer to the corresponding section.

Maximum coolant temperature

Fixed with display blocks lit in red

(with matrix instrument panel).

Persistent warning lamp

For further information on Personalisation -

Instrument Panel, refer to the corresponding

section for the Audio equipment and telematics

systems.

or

Fixed (except on matrix instrument panel).

The temperature of the cooling system is too

high.

Carry out (1), then wait until the engine has

cooled down before topping up the level, if

necessary. If the problem persists, carry out (2).

If a red or orange warning lamp comes on, there

may be fault which needs further investigation.

If a lamp remains lit

The references (1), (2) and (3) in the warning

and indicator lamp description indicate whether

you should contact a qualiﬁed professional in

addition to the immediate recommended actions.

(1): You must stop the vehicle.

Stop as soon as it is safe to do so and switch oﬀ

the ignition.

(2): Contact a PEUGEOT dealer or a qualiﬁed

workshop.

(3): Go to a PEUGEOT dealer or a qualiﬁed

workshop.

Warning and indicator

lamps

Displayed as symbols, the warning and indicator

lamps inform the driver of the occurrence of a

malfunction (warning lamps) or of the operating

status of a system (operation or deactivation

indicator lamps). Certain lamps light up in two

ways (ﬁxed or ﬂashing) and/or in several colours.

Engine oil pressure

Fixed.

There is a fault with the engine lubrication

system.

Carry out (1) and then (2).

System malfunction (Rechargeable hybrid)

Fixed.

The rechargeable hybrid system is faulty.

Carry out (1) and then (2).

Associated warnings

The illumination of a lamp may be accompanied

by an audible signal and/or a message displayed

in a screen.

Relating the type of alert to the operating status

of the vehicle allows you to determine whether

the situation is normal or whether a fault has

occurred: refer to the description of each lamp

for further information.

List of warning and

indicator lamps

Cable connected (Rechargeable hybrid)

Fixed when the ignition is switched on.

The charging cable is connected to the

vehicle's connector.

Red warning/indicator lamps

Fixed when the ignition is switched on,

accompanied by a message.

STOP

Fixed, associated with another warning

lamp, accompanied by the display of a

message and an audible signal.

A serious fault with the engine, braking system,

power steering or automatic gearbox or a major

electrical fault has been detected.

Carry out (1) and then (2).

It is not possible to start the vehicle while the

charging cable is connected to the vehicle’s

connector.

Disconnect the charging cable and close the

ﬂap.

When the ignition is switched on

Certain red or orange warning lamps come on

for a few seconds when the ignition is switched

on. These warning lamps should go oﬀ as soon

as the engine is started.

12

Instruments

Fixed, accompanied by the display of a

12V battery charge

With a manual gearbox, engage a gear.

With an automatic gearbox, select mode P.

Switch oﬀ the ignition and carry out (2).

1

Fixed.

message.

The battery charging circuit is faulty

One or more major faults, for which there is/are

no speciﬁc warning lamp(s), have been detected.

Identify the cause of the fault using the message

displayed on the instrument panel, then carry

out (3).

Fixed, accompanied by the message

"Parking brake fault".

Automatic release of the electric parking brake is

unavailable.

(e.g. dirty terminals, loose or severed alternator

belt).

Carry out (1).

If the electric parking brake stops working,

immobilise the vehicle:

► With the manual gearbox, engage a gear.

► With the automatic gearbox, ﬁt the chocks

against one of the wheels.

Power steering

Fixed, accompanied by an audible signal.

The power steering has a fault.

Carry out (1) and then (2).

Door(s) open

Fixed, associated with a message

identifying the access.

An audible signal supplements the alert if the

speed is higher than 6 mph (10 km/h).

A door or the boot is not properly closed.

Clean and tighten the terminals. If the warning

lamp does not go oﬀ when the engine is started,

carry out (2).

Carry out (2).

Service warning lamp ﬁxed and

service spanner ﬂashing then

ﬁxed.

The servicing interval has been exceeded.

The vehicle must be serviced as soon as

possible.

Seat belts not fastened/unfastened

Fixed or ﬂashing, accompanied by an

increasing audible signal.

A seat belt has not been fastened or has been

unfastened.

Braking

Fixed.

The brake ﬂuid level in the braking circuit

has dropped signiﬁcantly.

Carry out (1), then top up with ﬂuid that complies

with the manufacturer's recommendations. If the

problem persists, carry out (2).

Fixed.

The electronic brake force

distribution (EBFD) system is faulty.

Carry out (1) and then (2).

Only with BlueHDi Diesel engines.

Orange warning/indicator lamps

Braking

Fixed.

Service

A minor fault with the braking system has

been detected.

Drive carefully.

Temporarily on, accompanied by the

display of a message.

One or more minor faults, for which there is/are

no speciﬁc warning lamp(s), have been detected.

Identify the cause of the fault using the message

displayed on the instrument panel.

You may be able to deal with some faults

yourself, such as changing the battery in the

remote control.

Carry out (3).

Electric parking brake

Fixed.

Malfunction (with electric parking brake)

Fixed, accompanied by the

message "Parking brake fault".

The vehicle cannot be immobilised with the

engine running.

The electric parking brake is applied.

Flashing.

Application/release is faulty.

Carry out (1): park on ﬂat ground (on a level

surface).

For other faults, such as with the tyre under-

inﬂation detection system, carry out (3).

13

Instruments

If manual application and release commands are

not working, the electric parking brake control is

faulty.

► Start the engine.

► Use the control to apply the electric parking

brake.

The warning lamp should go oﬀ when the engine

is started.

Carry out (3) without delay.

The automatic functions must be used at all

times and are automatically reactivated in the

event of a fault with the control.

Carry out (2).

► Take your foot fully oﬀ the brake pedal.

► Hold the control pressed in the release

direction for between 10 and 15 seconds.

► Release the control.

► Depress and hold the brake pedal.

► Pull the control in the application direction for

2 seconds.

Dynamic stability control (DSC)/Anti-slip

regulation (ASR)

Fixed, accompanied by the lighting of the

indicator lamp in the button (depending

on version).

Fixed, accompanied by the

message "Parking brake

The system is deactivated:

fault".

– ASR via the touch screen.

– DSC/ASR via the button on the dashboard.

The system is reactivated automatically when

the vehicle is started, and at speeds above

approximately 31 mph (50 km/h) (except GT

Pack versions).

The electric parking brake is faulty: manual and

automatic functions may not be working.

When stationary, to immobilise the vehicle:

► Pull the electric parking brake control and

hold it for approximately 7 to 15 seconds, until

the indicator lamp lights up on the instrument

panel.

► Release the control and the brake pedal.

Anti-lock braking system (ABS)

Fixed.

The anti-lock braking system has a fault.

The vehicle retains conventional braking.

Drive carefully at moderate speed, then carry

out (3).

At speeds below 31 mph (50 km/h), it can be

reactivated manually.

If this procedure does not work, secure the

vehicle:

► Park on a level surface.

► With a manual gearbox, engage a gear.

► With an automatic gearbox, select P, then

place the supplied chocks against one of the

wheels.

Flashing.

Power steering

DSC/ASR system regulation is activated

in the event of a loss of grip or trajectory.

Fixed.

The DSC/ASR system has a fault.

Carry out (3).

Fixed.

A minor fault in the power steering has

been detected.

Drive carefully at moderate speed, then carry

out (3).

Emergency brake malfunction (with

electric parking brake)

Engine self-diagnostic system

Then carry out (2).

Flashing.

Automatic functions deactivated (electric

parking brake)

Fixed, accompanied by the

The engine management system has a

message "Parking brake fault".

Emergency braking does not deliver optimal

performance.

If automatic release is not available, use manual

release or carry out (3).

fault.

Fixed.

There is a risk that the catalytic converter will be

destroyed.

You must carry out (2).

The "automatic application" (on switching

oﬀ the engine) and "automatic release" (on

acceleration) functions are deactivated.

If automatic application/release is no longer

possible:

Fixed.

The emissions control system has a fault.

14

Instruments

In this case, do NOT install a "rearward

facing" child seat on the front passenger seat

- risk of serious injury!

Hill start assist

Fixed, accompanied by the

message "Anti roll-back system

fault".

The system has a fault.

Carry out (3).

Fixed, associated with the Service

warning lamp, accompanied by the

display of a message and an audible signal.

The system has a fault.

1

Front passenger airbag (OFF)

Fixed.

Carry out (3).

Engine pre-heating (Diesel)

Temporarily on

(up to approximately 30 seconds in

severe weather conditions).

When switching on the ignition, if the weather

conditions and the engine temperature make it

necessary.

Wait until the warning lamp goes oﬀ before

starting.

When the warning lamp goes oﬀ, starting will

occur immediately if you press and hold:

– the clutch pedal with a manual gearbox.

– the brake pedal with an automatic gearbox.

If the engine does not start, make the engine

starting request again, while keeping your foot

on the pedal.

The front passenger airbag is deactivated.

The control is set to the “OFF” position.

A "rearward facing" child seat can be installed,

unless there is a fault with the airbags (Airbags

warning lamp on).

Post Collision Safety Brake

Fixed, associated with the

Service warning lamp,

accompanied by the display of a message and

an audible signal.

The system has a fault.

Carry out (3) quickly.

Low fuel level

Fixed, with the blocks lit red,

accompanied by an audible signal

(with the matrix instrument panel)

or

Fixed, with the reserve level shown in red,

accompanied by an audible signal and the

display of a message (except with the matrix

instrument panel).

When it ﬁrst comes on, there are approximately

6 litres of fuel remaining in the tank (reserve).

Until the fuel level is topped up, this alert will

be repeated every time the ignition is switched

on, with increasing frequency as the fuel level

decreases and approaches zero.

Refuel without delay to avoid running out of fuel.

Never drive until completely empty, as

this could damage the emissions control and

injection systems.

Under-inﬂation

Fixed.

The pressure in one or more tyres is too

low.

Check the pressure of the tyres as soon as

possible.

Reinitialise the detection system after adjusting

the pressure.

Under-inﬂation warning lamp

ﬂashing then ﬁxed and Service

warning lamp ﬁxed.

The tyre pressure monitoring system is faulty.

Under-inﬂation detection is no longer monitored.

Check the tyre pressures as soon as possible

and carry out (3).

Airbags

Fixed, associated with the Service

warning lamp and accompanied by

the display of a message.

One of the airbags or seat belt pyrotechnic

pretensioners is faulty.

Carry out (3).

Parking sensors

Front passenger airbag (ON)

Fixed.

The front passenger airbag is activated.

The control is set to the “ON” position.

Fixed, accompanied by an onscreen

message and an audible signal.

The system is deactivated.

Pedestrian horn (Rechargeable hybrid)

Fixed.

Horn fault detected.

15

Instruments

Carry out (3).

Flashing.

Flashing then ﬁxed, accompanied by a

You are about to cross a broken

lane marking without operating the direction

indicators.

The system is activated, then corrects the

trajectory if it detects a risk of unintentionally

crossing a line or hard shoulder (depending on

version).

For more information, refer to the Driving

section.

Fixed, accompanied by the display

of a message and an audible

signal.

message.

The system has a fault.

Carry out (3).

AdBlue^®(BlueHDi)

On for around 30 seconds when starting

the vehicle, accompanied by a message

indicating the driving range.

The driving range is between 1,500 and 500

miles (2,400 and 800 km).

Top up the AdBlue^®.

Fixed, on switching on the ignition,

accompanied by an audible signal and a

message indicating the driving range.

The driving range is between 500 and 62 miles

(800 and 100 km).

Collision Risk Alert/Active Safety Brake

Fixed, accompanied by the display of a

message.

The system has been deactivated via the touch

screen.

Flashing.

The system activates and brakes the

vehicle momentarily to reduce the speed of

collision with the vehicle in front.

For more information, refer to the Driving

section.

Fixed, accompanied by a message and

an audible signal.

The system has a fault.

Carry out (3).

Stop & Start

Fixed.

The system has a fault.

If these warning lamps come on after the engine

is switched oﬀ and then restarted, carry out (3).

Fixed.

Fixed, accompanied by the display of a

message.

The Stop & Start system has been deactivated

manually.

The engine will not switch oﬀ at the next traﬃc

stop.

Reactivate the system via the touch screen.

Fixed.

The Stop & Start system has been

deactivated automatically.

The engine will not switch oﬀ at the next traﬃc

stop, if the exterior temperature is:

– below 0°C.

– above +35°C.

For more information, refer to the Driving

section.

Promptly top up the AdBlue^®, or carry out (3).

Flashing, accompanied by an audible

signal and a message indicating the

driving range.

The driving range is less than 62 miles (100 km).

You must top up the AdBlue^®to avoid engine

starting being prevented, or carry out (3).

Flashing, accompanied by an audible

signal and a message indicating that

starting is prevented.

The AdBlue^®tank is empty: the legally required

engine immobiliser system prevents the engine

from starting.

To restart the engine, top up the AdBlue^®or carry

out (2).

The system is deactivated

temporarily because the driver and/or front

passenger (depending on version) has been

detected as present but the corresponding seat

belt has not been fastened.

Active lane departure warning system

Fixed.

The system has been automatically

deactivated or placed on standby.

It is essential to add at least 5 litres of AdBlue^®

to the tank.

16

Instruments

Seat unoccupied/Seat belt not fastened

SCR emissions control system (BlueHDi)

Fixed when the ignition is switched

on, accompanied by an audible

signal and a message.

A malfunction of the SCR emissions control

system has been detected.

Peugeot Matrix LED Technology 2.0

Fixed, accompanied by an audible signal

and a message.

A malfunction of the Peugeot Matrix LED

Technology 2.0 headlamps or of the camera has

been detected.

1

Fixed.

(grey)

With the ignition on, one of the front or rear

passenger seats is considered to be unoccupied.

Seat occupied/Seat belt fastened

Fixed.

With the ignition on, the driver or a

passenger has fastened their seat belt.

This alert disappears once the exhaust

emissions return to normal levels.

Carry out (2).

Automatic headlamp dipping

Fixed, accompanied by an audible signal

and a message.

A function or camera malfunction is detected.

Carry out (2).

Flashing AdBlue^®warning lamp on

switching on the ignition, with the

Direction indicators

Engine self-diagnostics warning lamp on ﬁxed,

accompanied by an audible signal and a

message indicating the driving range.

Depending on the message displayed, it is

possible to drive for up to 685 miles (1,100 km)

before the engine immobiliser is triggered.

Carry out (3) without delay, to avoid starting

being prevented.

Flashing with audible signal.

The direction indicators are on.

Green warning/indicator lamps

Daytime running lamps/Sidelamps

Fixed.

With adequate ambient light, the daytime

running lamps are on.

With inadequate ambient light, the sidelamps

are on.

Stop & Start

Fixed.

When the vehicle stops, the Stop & Start

puts the engine into STOP mode.

Flashing temporarily.

Flashing AdBlue^®warning lamp on

switching on the ignition, with the

Dipped beam headlamps

Fixed.

STOP mode is momentarily unavailable

or START mode is automatically triggered.

For more information, refer to the Driving

section.

Engine self-diagnostics warning lamp on ﬁxed,

accompanied by an audible signal and a

message indicating that starting is prevented.

The engine immobiliser prevents the engine from

restarting (the permitted driving limit has been

exceeded after conﬁrmation of a malfunction of

the emissions control system).

The lamps are on.

Peugeot Matrix LED Technology 2.0

Fixed.

Vehicle ready to drive (Rechargeable

hybrid)

Fixed, accompanied by an audible signal

when it comes on.

The vehicle is ready to drive.

The function is activated.

Automatic headlamp dipping

Fixed.

(grey)

To start the engine, carry out (2).

Rear foglamps

Fixed.

The indicator lamp goes out upon reaching a

speed of approximately 3 mph (5 km/h) and

lights up again when the vehicle stops moving.

The lamp will go out when you turn oﬀ the

engine and exit the vehicle.

The function is activated, but not available.

All the operating conditions have not been met.

The lamps are on.

17

Instruments

Fixed.

The alert is given at whichever of these two

terms is reached ﬁrst.

Service spanner ﬂashing

Flashing then ﬁxed, when the

The function has been activated

via the touch screen.

The lighting control stalk ring is in the “AUTO”

position.

The servicing information is displayed in the

instrument panel. Depending on the version of

the vehicle:

ignition is switched on.

(With BlueHDi Diesel engines, associated with

the Service warning lamp.)

For more information, refer to the Lighting and

visibility section.

– The distance recorder display line indicates

the distance remaining before the next service

is due, or the distance travelled since it was due

preceded by the "-" sign.

The servicing interval has been exceeded.

Have your vehicle serviced as soon as possible.

Blue warning/indicator lamps

Resetting the service indicator

Main beam headlamps

Fixed.

– An alert message indicates the distance

remaining, as well as the period before the next

service is due or how long it is overdue.

The service indicator must be reset after each

service.

If you have serviced your vehicle yourself:

► Switch the ignition oﬀ.

The lamps are on.

Black/white warning lamps

The value indicated is calculated

according to the distance covered and

the time elapsed since the last service.

The alert may also be triggered close to a

due date.

Foot on the brake

Fixed.

Insuﬃcient or no pressure on the brake

pedal.

With an automatic gearbox, with the engine

running, before releasing the parking brake, to

move out of mode P.

Service spanner

On temporarily when the ignition is

switched on.

e-SAVE function (Rechargeable hybrid)

Fixed, accompanied by the reserved

electric range.

Between 620 and 1,860 miles (1,000 and 3,000

km) remain before the next service is due.

Fixed, when the ignition is switched on.

The next service is due in less than 620

miles (1,000 km).

► Press and hold the button located on the end

of the lighting control stalk.

► Switch on the ignition without starting the

engine; a temporary display window appears and

a countdown begins.

► When the display indicates =0, a conﬁrmation

message appears; release the lighting control

stalk button and the spanner symbol disappears.

The function is activated.

Indicators

Have your vehicle serviced very soon.

Service indicator

The servicing information is expressed in terms

of distance (miles or kilometres) and time

(months or days).

If you disconnect the battery following

this operation, lock the vehicle and wait

18

Instruments

at least 5 minutes for the reset to be

registered.

In the event of a malfunction of the

electric gauge, the oil level is no longer

monitored.

If the system is faulty, you must check the

engine oil level using the manual dipstick

located in the engine compartment.

For more information on Checking levels,

refer to the corresponding section.

After switching oﬀ the ignition, carefully

open the bonnet and check the coolant

level.

1

Reminder of the servicing information

For more information on Checking

levels, refer to the corresponding

section.

Servicing information is accessible using

the Settings > Vehicle application on the

touch screen.

► Then select Safety > Diagnostics.

AdBlue^®range indicators

(BlueHDi)

The Diesel BlueHDi engines are equipped with

a system that associates the SCR (Selective

Catalytic Reduction) emissions control system

and the Diesel particle ﬁlter (DPF) for the

treatment of exhaust gases. They cannot

function without AdBlue^®ﬂuid.

Engine oil level indicator

Coolant temperature

indicator

(Depending on version)

The level read will only be correct if the

vehicle is on level ground and the engine

has been oﬀ for more than 30 minutes.

Low oil level

When the level of AdBlue^®falls below the

reserve level (between 1,500 and 0 miles (2,400

and 0 km)), a warning lamp lights up when

the ignition is switched on and an estimate

of the distance that can be travelled before

engine starting is prevented is displayed in the

instrument panel.

This is indicated by the message "Oil

level incorrect" on the instrument panel,

accompanied by the lighting of the Service

warning lamp and an audible signal.

If a low oil level is conﬁrmed by a check using

the dipstick, the level must be topped up to avoid

damage to the engine.

With the engine running:

– In zone A, the temperature is correct.

– In zone B, the temperature is too high.

The associated warning lamp and the

STOP warning lamp light up in red on the

instrument panel, accompanied by the display of

a message and an audible signal.

You must stop the vehicle as soon as it is

safe to do so.

For more information on Checking levels, refer

to the corresponding section.

The engine starting prevention system

required by regulations is activated

automatically once the AdBlue^®tank is empty.

It is then no longer possible to start the

engine until the minimum level of AdBlue^®has

been topped up.

Oil gauge malfunction

This is indicated by the message "Oil level

measurement invalid" on the instrument panel.

Consult a PEUGEOT dealer or a qualiﬁed

workshop.

Wait a few minutes before switching oﬀ the

engine.

19

Instruments

Manual display of driving range

Malfunction of the SCR emissions

control system

Warning/

indicator

lamps on

Action

Remaining

range

While the driving range is greater than

1,500 miles (2,400 km), it is not displayed

automatically.

Malfunction detection

Top up.

Between

1,500 miles

and 500

miles (2,400

km and 800

km)

Driving range information is accessible

using the Settings > Vehicle application

on the touch screen.

If a malfunction is detected,

these warning lamps come

on, accompanied by an

audible signal and the

display of an "Emissions

control fault" message.

► Then select Safety > Diagnostics.

Actions required related to a lack of

AdBlue^®

Top up as

soon as

possible.

Between

500 miles

and 62

miles (800

km and

The alert is triggered while driving when the

fault is detected for the ﬁrst time, and thereafter

when switching on the ignition for subsequent

journeys, for as long as the cause of the fault

persists.

The following warning lamps light up when the

quantity of AdBlue^®is below the reserve level:

driving range of 1,500 miles (2,400 km).

Together with the warning lamps, messages

regularly remind you of the need to top up to

avoid engine starting being prevented. Refer to

the Warning and indicator lamps section for

details of the messages displayed.

100 km)

If the fault is temporary, the alert

disappears during the next journey, after

self-diagnostic checks of the SCR emissions

control system.

A top-up is

vital, there is

a risk that the

engine will

be prevented

from starting.

Between 62

miles and 0

miles (100

km and 0

km)

For more information on AdBlue^®

(BlueHDi) and in particular on topping

up, refer to the corresponding section.

Malfunction conﬁrmed during the

permitted driving phase (between 685

miles and 0 miles (1,100 km and 0 km))

To be able

0 miles (km)

to restart the

engine, add at

least 5 litres of

AdBlue^®to the

tank.

If the fault indication is still displayed

permanently after 31 miles (50 km) of driving, the

fault in the SCR system is conﬁrmed.

The AdBlue warning lamp ﬂashes and

a message is displayed ("Emissions

control fault: starting prevented in X miles

(kms)"), indicating the driving range in miles or

kilometres.

20

Instruments

While driving, the message is displayed every 30

seconds. The alert is repeated when switching

on the ignition.

You can continue driving for up to 685 miles

(1,100 km) before the engine starting

prevention system is triggered.

CHARGE Energy recovery for partly

1

recharging the traction battery.

The slider is located in this zone

during deceleration: taking your foot

oﬀ the accelerator pedal or braking.

Have it checked by a PEUGEOT dealer

or a qualiﬁed workshop.

Charge level indicator

(Rechargeable hybrid)

POWER High power demand, using the

combined capabilities of the petrol

engine and the electric motor.

The slider is located in this zone

during more dynamic driving phases

when high levels of performance are

being demanded.

Starting prevented

Every time the ignition is switched on, the

message "Emissions control fault: Starting

prevented" is displayed.

To restart the engine

Contact a PEUGEOT dealer or a

qualiﬁed workshop.

ECO

Optimal use of energy (internal

combustion or electric).

The charge level of the traction battery and

the remaining range in electric driving mode

are permanently displayed when the vehicle is

switched on.

The slider is located in this zone

when driving under electric power and

when optimal use is being made of

the petrol engine, both accessible by

adopting a suitable driving style.

A symbol indicates the threshold at

which the petrol engine will restart.

The driver can therefore moderate

their acceleration to remain in electric

driving mode.

Power indicator

(Rechargeable hybrid)

The power indicator shows in real time the power

demanded from the vehicle.

The range displayed depends on the use

of the vehicle (type of driving and speed),

the outside temperature and the activated

comfort equipment.

There are 3 zones:

Manual test

This function allows you to check certain

indicators and display the alerts log.

The test is launched in the Settings>

Vehicle touch screen application.

21

Instruments

► Then select Safety > Diagnostics.

The following information is displayed on the

instrument panel:

– Tyre pressures.

– Engine oil level (depending on engine).

– Next service due.

– Driving range associated with the AdBlue^®and

the SCR system (BlueHDi Diesel).

– Current alerts.

Rechargeable hybrid vehicles

The total distance recorder is only

accessible from the trip computer.

For more information on the Trip computer,

refer to the corresponding section.

► Pressing the button located on the end of the

wiper control stalk displays the following tabs in

turn:

– Current information:

• Current consumption (Petrol or Diesel).

• Time counter for Stop & Start (Petrol or

Diesel).

• Percentage of the current journey travelled

in all-electric driving mode (Rechargeable

hybrid).

• Total distance recorder (Rechargeable

hybrid).

– Trips "1" then "2":

Lighting dimmer

Used to manually adjust the brightness of the

instruments and controls to suit the exterior light

level.

It is conﬁgured in the Settings >

Brightness touch screen application.

► In the "Cockpit" category, press or move the

slider to the desired setting.

This information is also displayed

automatically every time the ignition is

switched on.

• Average speed.

• Average fuel consumption.

• Distance travelled.

Total distance recorder

The total distance recorder measures the total

distance travelled by the vehicle since its initial

registration.

With the ignition on, the total distance is

displayed at all times. It remains displayed for

30 seconds after switching oﬀ the ignition. It is

displayed when the driver's door is opened, and

when the vehicle is locked or unlocked.

Trip computer

Displays information related to the current trip

(range, fuel consumption, average speed, etc.).

Trip reset

► When the desired trip is displayed,

press the button on the end of the wiper

control stalk for more than 2 seconds.

Trips "1" and "2" are independent and are used

in the same way.

Data displayed on the

instrument panel

Displaying the diﬀerent tabs

When travelling abroad, you may have to

change the distance units (miles or km):

the displayed speed must be in the local

country’s oﬃcial unit (mph or km/h).

The unit is changed via the screen's

conﬁguration application, with the vehicle

stationary.

Deﬁnitions

Range

(miles or km)

Distance that can still be travelled with the

fuel remaining in the tank (based on the

average fuel consumption over the last few miles

(kilometres) travelled).

22

Instruments

– Navigation system controls and display

of associated information (depending on

equipment).

This value may vary following a change in driving

style or terrain, leading to a signiﬁcant change in

current fuel consumption.

When the range falls below 19 miles (30 km),

dashes are displayed.

After ﬁlling with at least 5 litres of fuel, the range

is recalculated and is displayed if it exceeds 62

miles (100 km).

Dashes appearing permanently in place of

numbers while driving indicates a malfunction.

Consult a PEUGEOT dealer or a qualiﬁed

workshop.

Calculated since the last trip computer

reset.

1

Stop & Start time counter

– Voice recognition (depending on equipment).

(minutes/seconds or hours/minutes)

For safety reasons, always stop the

vehicle before performing operations

that require sustained attention.

Some functions are not accessible while

driving.

If your vehicle is ﬁtted with the Stop & Start

function, a time counter calculates the time spent

in STOP mode during a journey.

The time counter is reset each time the ignition is

switched on.

Recommendations

These recommendations are valid for the touch

screen and for the i-Toggles (depending on

equipment).

The touch screen and the i-Toggles screen are

capacitive touch screens.

Do not use pointed objects on the touch screen.

Do not touch the touch screen with wet hands.

► Use a soft, clean cloth to clean the touch

screen.

10-inch touch screen

Current consumption

(mpg or l/100 km or km/l)

This system gives access to the following

elements:

Calculated during the last few seconds.

– Time and exterior temperature.

– Heating/air conditioning system controls and

reminders of settings.

– Settings for driving aid functions, comfort and

safety functions, audio equipment and digital

instrument panel.

– Settings of functions speciﬁc to rechargeable

hybrid vehicles.

– Display of visual manoeuvring aid functions.

– Interactive handbook.

– Video tutorials (e.g. screen management,

driving aids, voice recognition).

– Audio equipment and telephone controls with

display of associated information.

– Connected services and display of associated

information.

This function is only displayed at speeds above

19 mph (30 km/h).

Average consumption

(mpg or l/100 km or km/l)

Calculated since the last trip computer

reset.

Main controls

Access to one of the home pages

Return to the ﬁrst home page

Average speed

(mph or km/h)

Direct access to the Climate application

Calculated since the last trip computer

reset.

Direct access to the Shortcuts for

driving aids

► Swipe down from the upper edge of the touch

screen to access a list of quick settings (e.g.

Brightness, Diagnostics).

Distance travelled

(miles or km)

23

Instruments

► Depending on the pages displayed on the

screen, with or without the context menu, scroll

the text by swiping with your ﬁnger, as with a

smartphone.

To obtain information about the other

applications not listed here, refer to the sections

describing the audio and telematic systems.

ADAS

Activation/Deactivation and conﬁguration

of the driving aid functions.

Energy application

Energy Flow

The page shows the operation of the

rechargeable hybrid system in real time.

Show/Hide context menu

Return to the previous page

Climate

Settings for temperature, air ﬂow, etc.

For more information on Dual-zone automatic

air conditioning, refer to the corresponding

section.

Activation/Deactivation of the heated steering

wheel.

For more information on the Heated steering

wheel, refer to the corresponding section.

Seat Options

Activation/Deactivation and conﬁguration

of the seat comfort functions (heating and

massages).

► To change the status of a function, press the

description for the corresponding line (change

conﬁrmed by the slider moving to the right/left:

function activated/deactivated).

1. Active driving mode

2. Petrol engine

3. Electric motor

Access additional information on the

function

Access to function parameters

4. Traction battery charge level

The energy ﬂows have a speciﬁc colour for each

type of driving:

– Blue: 100% electrical energy.

– White: energy from the petrol engine.

– Green: energy recovery.

Adding/Removing shortcuts

Short press, ignition oﬀ: system on/oﬀ.

Short press, ignition on: mute/restore

sound.

Long press, ignition on: start standby mode

(mute sound, screens and clock display oﬀ).

Rotation: volume adjustment.

For more information on the Heated seats

or on the Multi-point massages, refer to the

corresponding section.

Statistics

This page shows electrical energy and fuel

consumption statistics.

Settings

Main settings for the audio system, touch

screen and digital instrument panel.

Activation/Deactivation and conﬁguration of

the exterior lighting, vehicle access and safety

functions.

Applications

From the home page, press this button to

access the applications wall.

Energy

From any page, press the touch screen

with three ﬁngers to display the

applications wall.

Access to the rechargeable hybrid system

features (energy ﬂow, consumption statistics,

deferred charging, e-SAVE function).

24

Instruments

1. Average electrical consumption for the current

trip (kWh/100 km) and historical values:

– Blue graph: energy consumed directly from

the traction battery.

– Green graph: energy regenerated during

deceleration and braking phases to recharge the

battery.

If the requested range exceeds the

available range (not recommended), the

internal combustion engine starts to recharge

the traction battery up to the requested

threshold. This leads to excessive fuel

consumption.

Remotely operable

additional functions

(Rechargeable hybrid)

1

The following functions are

available from the MYPEUGEOT

APP application, which is

2. Average fuel consumption for the current trip

(l/100 km) and historical values (orange graph).

i-Toggles

This system is an additional touch screen

associated with the PEUGEOT i-Connect

Advanced. It is designed to provide a

personalised display of shortcuts to applications

or presets.

Charging

This page allows you to programme deferred

charging.

For more information on Charging the traction

battery (Rechargeable hybrid), refer to the

corresponding section.

accessible from a smartphone:

– Managing the traction battery charging

(deferred charging).

– Managing the temperature pre-conditioning.

– Viewing the state of charge and range of the

vehicle.

By default, it directs you to the main applications:

Media, Climate, Navigation, Phone, Mirror

Screen, etc.

The shortcuts can be replaced by: radio preset,

temperature preset, pre-selected destination,

pre-selected contact, pre-selected smartphone,

etc.

For more information on Personalisation -

i-Toggles, refer to the corresponding section for

the Audio equipment and telematics systems.

Installation procedure

e-SAVE

► Download the MYPEUGEOT APP app from

the appropriate online store for your smartphone.

► Create an account.

► Enter the vehicle’s VIN (code beginning with

"VF" on the vehicle registration certiﬁcate).

For more information on Identiﬁcation

markings, refer to the corresponding section.

The e-SAVE function makes it possible to

reserve all or part of the electrical energy of the

traction battery to be used later during a journey

(e.g. passing through an urban area or an area

reserved for electric vehicles).

► Select the electric range to be reserved (6

miles (10 km), 12 miles (20 km) or the full

range MAX) then activate the function.

Activation of the function is conﬁrmed by

the lighting of this indicator lamp on the

instrument panel and the indication of the energy

reserve in miles or kms.

If the vehicle is exposed to sunlight for an

extended period, the touch screen can

become very hot.

Network coverage

In order to be able to use the various

remotely operable features, ensure that your

vehicle is located in an area covered by the

mobile network.

A lack of network coverage may prevent

communication with the vehicle (for example,

Wait a few minutes before using the system.

► To use the energy reserve, choose the

Electric driving mode in the mode selector.

25

Instruments

if it is in an underground car park). In such

cases, the application will display a message

indicating that the connection with the vehicle

could not be established.

26

Download User Manual App

Instruments for Your Peugeot 308 4 Door 2021-2025

Related Topics

Popular Owner Manuals

Latest Owner Manuals