Instruments
► Then select Safety > Diagnostics.
The following information is displayed on the
instrument panel:
– Tyre pressures.
– Engine oil level (depending on engine).
– Next service due.
– Driving range associated with the AdBlue® and
the SCR system (BlueHDi Diesel).
– Current alerts.
Rechargeable hybrid vehicles
The total distance recorder is only
accessible from the trip computer.
For more information on the Trip computer,
refer to the corresponding section.
► Pressing the button located on the end of the
wiper control stalk displays the following tabs in
turn:
– Current information:
• Current consumption (Petrol or Diesel).
• Time counter for Stop & Start (Petrol or
Diesel).
• Percentage of the current journey travelled
in all-electric driving mode (Rechargeable
hybrid).
• Total distance recorder (Rechargeable
hybrid).
– Trips "1" then "2":
Lighting dimmer
Used to manually adjust the brightness of the
instruments and controls to suit the exterior light
level.
It is configured in the Settings >
Brightness touch screen application.
► In the "Cockpit" category, press or move the
slider to the desired setting.
This information is also displayed
automatically every time the ignition is
switched on.
• Average speed.
• Average fuel consumption.
• Distance travelled.
Total distance recorder
The total distance recorder measures the total
distance travelled by the vehicle since its initial
registration.
With the ignition on, the total distance is
displayed at all times. It remains displayed for
30 seconds after switching off the ignition. It is
displayed when the driver's door is opened, and
when the vehicle is locked or unlocked.
Trip computer
Displays information related to the current trip
(range, fuel consumption, average speed, etc.).
Trip reset
► When the desired trip is displayed,
press the button on the end of the wiper
control stalk for more than 2 seconds.
Trips "1" and "2" are independent and are used
in the same way.
Data displayed on the
instrument panel
Displaying the different tabs
When travelling abroad, you may have to
change the distance units (miles or km):
the displayed speed must be in the local
country’s official unit (mph or km/h).
The unit is changed via the screen's
configuration application, with the vehicle
stationary.
Definitions
Range
(miles or km)
Distance that can still be travelled with the
fuel remaining in the tank (based on the
average fuel consumption over the last few miles
(kilometres) travelled).
22
English 