Download User Manual App

Quickly access user manual for free!

Lighting and visibility -> Guide-me-home and welcome lighting for Your Peugeot 308 4 Door 2021-2025

Lighting and visibility  
is detected by the rain/sunshine sensor, the  
sidelamps and dipped beam headlamps are  
switched on automatically, without any action on  
the part of the driver. They may also come on if  
rain is detected, at the same time as automatic  
operation of the windscreen wipers.  
The inner surface of the windscreen may  
become misted up and affect the proper  
operation of the rain/sunshine sensor.  
In humid and cold weather, demist the  
windscreen regularly.  
0
(Initial setting)  
Driver only or driver + front passenger  
5 people  
5 people + load in the boot  
Driver only + load in the boot  
4
1
2
3
4 5 6 Not used  
As soon as the brightness returns to a sufficient  
level or after the windscreen wipers are switched  
off, the lamps are switched off automatically.  
Guide-me-home and  
welcome lighting  
Automatic Peugeot Matrix  
LED Technology 2.0  
headlamp adjustment  
This system automatically adjusts the height of  
the headlamp beams according to the load in the  
vehicle.  
In the event of a malfunction, this warning  
lamp lights up on the instrument panel,  
accompanied by the display of a message and  
an audible signal.  
Malfunction  
Guide-me-home lighting  
Automatic  
In the event of a malfunction of the rain/  
sunshine sensor, the vehicle’s lamps  
come on and this warning lamp is displayed on  
the instrument panel, accompanied by an  
audible signal and/or the display of a message.  
Have it checked by a PEUGEOT dealer or a  
qualified workshop.  
With the ring of the lighting control stalk in the  
"AUTO” position and when the light is poor, the  
dipped beam headlamps come on automatically  
when the ignition is switched off.  
You can activate/deactivate and adjust  
the duration of the guide-me-home  
lighting in the Settings > Vehicle touch screen  
application.  
The system places the headlamp beams in the  
lowest position.  
Have it checked by a PEUGEOT dealer or a  
qualified workshop.  
Do not cover the rain/sunshine sensor  
located at the top centre of the  
windscreen behind the interior rear view  
mirror; the associated functions would no  
longer be controlled.  
Manual  
Do not touch the Peugeot Matrix LED  
Technology 2.0 headlamps - risk of  
electrocution!  
In fog or snow, the rain/sunshine sensor  
may detect sufficient light. For this  
reason, the lighting will not come on  
automatically.  
Automatic illumination of  
lamps  
With the lighting control stalk in the “AUTO”  
position and if a low level of exterior brightness  
69  
Lighting and visibility  
► With the ignition off, pull the lighting control  
stalk toward you ("headlamp flash") to activate/  
deactivate the function.  
Manual guide-me-home lighting goes off  
automatically after a period of time.  
Do not allow snow to accumulate on the  
bonnet or roof of the vehicle as this could  
obstruct the camera.  
Automatic lighting  
systems - General  
recommendations  
The automatic lighting systems use a detection  
camera, located at the top of the windscreen.  
Automatic headlamp  
dipping  
Welcome lighting  
When the vehicle is unlocked in low light  
conditions and the "Automatic illumination of  
headlamps" function is activated, this system  
automatically switches on:  
Operating limits  
The system may be disrupted or not work  
correctly:  
– When visibility conditions are poor  
(e.g. snowfall, heavy rain).  
– If the windscreen is dirty, misted-up or  
masked (e.g. sticker) in front of the camera.  
– If the vehicle is facing highly reflective signs  
or safety barrier reflectors.  
The system is not able to detect:  
– Road users that do not have their own  
lighting, such as pedestrians.  
– Vehicles with hidden lighting (e.g. travelling  
behind a safety barrier on the motorway).  
– Vehicles at the top or bottom of a steep  
slope, on winding roads, on crossroads.  
For more information, refer to the  
General recommendations for  
automatic lighting systems.  
– On the outside, sidelamps, dipped beam  
headlamps and door mirror spotlamps.  
– Inside, courtesy lamps and footwell lighting.  
With the ring of the lighting control stalk in the  
"AUTO" position and the function activated on  
the touch screen, this system automatically  
switches between dipped and main beam  
headlamps, according to lighting and traffic  
conditions, using a camera located at the top of  
the windscreen.  
Door mirror spotlamps  
These spotlamps facilitate access to the vehicle  
by lighting the ground near the front doors.  
The spotlamps come on automatically:  
– when the vehicle is unlocked.  
– when a door is opened.  
– when a request to locate the vehicle is  
received from the remote control.  
They also come on with the welcome lighting  
and guide-me-home lighting functions.  
They go off automatically after 30 seconds.  
Maintenance  
Clean the windscreen regularly,  
particularly the area in front of the camera.  
The internal surface of the windscreen can  
also become misted around the camera.  
In humid and cold weather, demist the  
windscreen regularly.  
70