DRIVING
Increasing the programmed
speed
Temporary acceleration/
deceleration
Temporary acceleration
Press the accelerator pedal as normal.
When the pedal is released, you return
to the stored speed.
Reactivating the function
When the cruise control has been de-
activated, you can return to the stored
speed by pressing button 3 "ACC RES"
when you reach a minimum speed of
25 mph (40 km/h).
) Using button 3 "ACC RES":
-
successive presses increase the
speed in steps of approximately
1 mph (1.6 km/h).
-
a maintained press of this button
increases the programmed speed
progressively.
Temporary deceleration
Press the brake pedal to reduce the
speed. To return to the stored speed,
press button 3 "ACC RES".
Once the speed required has been
reached, release the button, the new
speed is stored.
) Using the accelerator pedal:
-
accelerate to reach the speed re-
quired, then press button 2 "COAST
SET". Release the button to store
the new speed.
Deactivating the function
To deactivate the cruise control:
) Press the brake or clutch pedal, or
) Press button 1 "ON OFF", or
) Press button 4 "CANCEL".
When the cruise control is in
operation, pay attention if you
press and hold one of the pro-
grammed speed adjustment
buttons: this can result in a very
rapid change in the speed of
your vehicle.
Do not use the cruise control on
slippery roads or in heavy traffic.
On a steep descent, the cruise
control will not be able to pre-
vent the vehicle from exceeding
the programmed speed.
7
Decreasing the programmed
speed
) Using button 2 "COAST SET":
-
successive presses decrease the
speed in steps of approximately
1 mph (1.6 km/h).
The cruise control may be deactivated
automatically:
) When the vehicle reaches a speed
-
a maintained press of this button
decreases the speed progressively.
below 20 mph (35 km/h).
) When the active stability control sys-
tem (ASC) comes into operation.
Once the speed required has been
reached, release the button, the new
speed is stored.
To prevent the mat from becom-
ing caught under the pedals:
) Using the brake pedal:
-
ensure that the mat is posi-
tioned correctly,
never fit one mat on top of
-
brake to deactivate the cruise con-
trol, then press button 2 "COAST
SET". Release to store the new
speed.
-
another.
English 