Advertisement

Advertisement

DRIVING -> DCS gearbox for Your Peugeot 4007 4 Door 2012-2017

DRIVING  
DCS GEARBOX  
Displays in the instrument  
panel  
Gear lever positions  
The six-speed electronically controlled  
gearbox offers a choice between the  
comfort of automatic regulation or the  
pleasure of manual gear changing.  
This gearbox has three driving modes:  
-
-
-
a manual mode for changing of the  
gears by the driver using the steering  
mounted controls or the gear lever,  
a "Normal" automatic mode for eco-  
nomical control of the gears (everyday  
use),  
a "Sport" automatic mode which  
permits a more dynamic style of  
driving, with improved acceleration  
and optimised engine braking.  
When you move the lever in the gate P: park.  
to select a position, the corresponding  
indicator or message is displayed in the  
instrument panel.  
With your foot on the brake,  
this position permits starting of  
the vehicle.  
7
P. Park.  
R. Reverse.  
N. Neutral.  
D. Drive (Automatic mode).  
NORMAL. Normal mode.  
SPORT. Sport mode.  
To exit position P, raise the ring on the  
gear lever.  
R: reverse gear.  
With the vehicle stationary, keep your  
foot on the brake pedal and push the  
gear lever forwards.  
1,2,3,4,5,6. Gear engaged during manual  
operation.  
N: neutral.  
With your foot on the brake, this position  
also permits starting of the vehicle.  
D: automatic mode.  
Move the lever rearwards.  
+/-: manual mode with gear changing  
using the lever.  
 
DRIVING  
Moving off  
Manual mode  
Using the gear lever  
Using the steering mounted controls  
Select position P or N.  
Press the brake pedal rmly Move the gear lever backwards, then to Press behind the "+" steering mounted  
while starting the engine.  
the left to select position +/-.  
Push forwards (+) to change up.  
Push backwards (-) to change down.  
control paddle to change up.  
Press behind the "-" steering mounted  
control paddle to change down.  
The gear change requests are only car-  
ried out if the engine speed permits it.  
Take your foot off the accelerator pedal  
gently to engage the gear.  
At low speeds, when approaching a  
stop or trafc lights for example, the  
gearbox changes down to rst gear au-  
tomatically.  
7
Start the engine.  
"P" or "N" appears in the instrument  
panel screen.  
Select rst gear (D or +/-) or reverse (R).  
Release the parking brake.  
Release the brake pedal then accelerate.  
"D" or "1" or "R" appears in the instru-  
ment panel screen.  
 
DRIVING  
"Normal" automatic mode  
"Sport" automatic mode  
Stopping the vehicle  
Select position D.  
"D" appears in the instrument panel  
screen.  
From automatic mode, you can engage Before switching off the engine, you  
"Sport" mode.  
With the vehicle moving or stationary,  
must engage position P or N to place  
the gearbox in neutral.  
push the thumb wheel A forward.  
"SPORT" appears in the instrument  
panel screen.  
You must apply the parking brake to im-  
mobilise the vehicle.  
The gear lever must be in position P to  
The gearbox then operates in automatic  
mode, without any action on the part of  
the driver.  
To optimise driving comfort and obtain  
the most suitable gear, avoid sharp vari-  
ations in the pressure on the accelerator  
pedal.  
remove the ignition key.  
Hill start assist  
To assist you when starting on a gradi-  
ent, your vehicle is tted with a system  
which immobilises it briey (approxi-  
mately 2 seconds), the time required to  
move your foot from the brake pedal to  
the accelerator pedal. This function is  
only active when the vehicle has been  
completely immobilised with your foot  
on the brake pedal and on certain gra-  
dients.  
Do not get out of the vehicle during  
the hill start assist temporary immo-  
bilisation phase.  
To immobilise the vehicle on a gradient  
for a longer period, you must use the  
parking brake, not the accelerator.  
"Temporary" manual mode  
In automatic mode, you can take control  
Switching off "Sport" automatic  
mode  
temporarily at any time using the steer- You can return to "Normal" automatic  
ing mounted controls.  
mode at any time:  
The use of these controls permits manual Push the thumbwheel A rearward once.  
selection of the gears in situations which  
require a faster change down than that  
offered in automatic mode (arrival at a  
roundabout, exit from a car park with a  
steep gradient, overtaking...).  
The gearbox engages the gear re-  
quested if the engine speed permits it.  
The gear engaged appears.  
To return to the automatic mode, press  
the back of the "+/OFF" control for at  
least 2 seconds.  
7
When starting on a gradient, accelerate  
gradually while releasing the parking  
brake.  
 
DRIVING  
Reverse gear  
Operating fault  
Flashing of the indicator R in the instru-  
ment panel screen, accompanied by an  
audible signal, indicates a malfunction  
on engaging the gear:  
Press the brake pedal, position the gear  
lever in position N and engage reverse  
gear again.  
With the ignition on, if this warning light  
comes on, accompanied by vibration  
in the pedals and the message "Main-  
tenance required" on the instrument  
panel display, this indicates a gearbox  
malfunction.  
If the message is displayed, carry out  
the following operations:  
-
slow down and stop your vehicle in  
a safe place,  
-
place the lever in position P or N,  
apply the parking brake and let the  
engine run,  
7
-
open the bonnet to allow the engine  
to cool.  
If the message disappears for a long  
period, you can set off again.  
If the message remains displayed or ap-  
pears frequently, contact a PEUGEOT  
dealer or a qualied workshop without  
delay.  
Overheating of the engine may re-  
sult in unwanted declutching of the  
gearbox.