Advertisement

Advertisement

PRACTICAL INFORMATION -> Changing a bulb for Your Peugeot 4007 4 Door 2012-2017

PRACTICAL INFORMATION  
CHANGING A BULB  
Front lamps  
WARNING: RISK OF  
ELECTROCUTION  
Xenon bulbs must be replaced by a  
PEUGEOT dealer or a qualied work-  
shop.  
In some weather conditions (e.g.  
low temperature or humidity), the  
presence of misting on the internal  
surface of the glass of the head-  
lamps and rear lamps is normal; it  
disappears after the lamps have  
been on for a few minutes.  
1. Direction indicators  
(PY21W - 21 W).  
2. Dipped beam headlamps  
(H11 - 55 W)  
or xenon bulb (D2S - 35 W).  
3. Sidelamps (W5W - 5 W).  
4. Main beam headlamps  
(H7 - 55 W).  
Handle the bulbs using a dry  
cloth.  
Do not clean the headlamps  
using a dry or abrasive cloth,  
or using detergent or solvent  
products, use a sponge and  
soapy water.  
9
5. Front foglamps  
(H11 - 55 W).  
 
PRACTICAL INFORMATION  
Direction indicators (1)  
Access to the bulbs on the left-hand Access to the bulbs on the right-  
side  
hand side  
When you change a bulb on the left-  
hand side, remove the relay box xing  
nut B and move the relay box towards  
the rear.  
) Turn the bulb holder A to the left  
and remove it.  
) Pull the bulb and change it.  
To ret, carry out these operations in  
reverse order.  
When you change a bulb on the right-  
hand side:  
) Remove the screenwash reservoir  
xing C and move the reservoir to-  
wards the rear.  
) Remove the coolant reservoir xing  
nut D.  
9
Coloured bulbs must be re-  
placed with bulbs of identical  
specication and colour.  
) Remove the clip E and raise the res-  
ervoir moving it towards the front.  
 
PRACTICAL INFORMATION  
Changing dipped beam headlamp  
bulbs (2)  
Changing sidelamp bulbs (3)  
Changing main beam headlamp  
bulbs (4)  
) Unscrew the cover H.  
) Disconnect the connector.  
) Unscrew the cover J.  
) Disconnect the connector.  
) Unscrew the cover F.  
) Disconnect the connector.  
9
) Turn the bulb holder I a quarter of a  
turn and remove it.  
) Turn the bulb G to the left and re-  
move it.  
) Move aside the spring K to release  
the bulb and remove it.  
) Pull the bulb and change it.  
To ret, carry out these operations in  
reverse order.  
To ret, carry out these operations in  
reverse order.  
To ret, carry out these operations in  
reverse order.  
 
PRACTICAL INFORMATION  
Changing integrated direction  
indicator side repeaters  
Changing foglamp bulbs (5)  
) Push the repeater A towards the ) Remove the protective cover B by ) Disconnect the connector D.  
pulling it towards the front.  
rear and detach it.  
) Unclip the repeater.  
) Disconnect the repeater connector  
and change the repeater.  
To ret, carry out these operations in  
reverse order.  
To obtain repeaters, contact a PEUGEOT  
dealer or qualied workshop.  
9
) Remove the three screws C then ) Turn the bulb E to the left and re-  
pull the lamp holder towards you.  
move it.  
To ret, carry out these operations in  
reverse order.  
 
PRACTICAL INFORMATION  
Changing brake lamp/sidelamp and  
direction indicator bulbs  
Rear lamps  
These two bulbs are changed from out-  
side with the tailgate open:  
) Open the tailgate (refer to the "Access"  
section),  
) Turn the pin C to the left and remove it.  
) Pull the bulb D out and change it.  
To ret, carry out these operations in  
reverse order.  
1. Third brake lamp (LEDs).  
2. Brake lamps/Sidelamps  
(21/5 - W21W - 5 W).  
3. Direction indicators  
(WY21W - 21 W).  
4. Reversing lamps (W21W - 21 W).  
) Remove the two lamp xing bolts A,  
) Extract the lamp unit from outside,  
5. Number plate lamps  
(W5W - 5W).  
6. Foglamps  
9
(W21W - 21 W).  
Amber coloured bulbs, such as  
the direction indicators, must be  
replaced with bulbs of identical  
specication and colour.  
When retting the lamp unit, align the  
two pins E with the openings on the ve-  
hicle.  
Changing the third brake lamp  
(LEDs)  
All work on the LED lamps must be  
carried out by a PEUGEOT dealer or a  
qualied workshop.  
) Turn the pin B to the left and remove it.  
) Pull the bulb out and change it.  
 
PRACTICAL INFORMATION  
Changing reversing lamp bulbs  
) Open the tailgate (refer to the "Access" ) Pull the bulb C out and change it.  
section),  
) Insert a thin screwdriver in the open-  
ing on the lens to press the tab E.  
) Remove the lens.  
) Pull the bulb out and change it.  
To ret, carry out these operations in  
reverse order.  
To ret, carry out these operations in  
) From the inside of the tailgate, in- reverse order.  
sert a screwdriver in the opening on  
the cover A to use it as a lever to  
open the cover.  
Changing number plate lamp bulbs  
9
) Open the tailgate (refer to the "Ac-  
cess" section) to gain access to the  
number plate lamps D,  
) Remove the lamp unit D while  
pressing it to the left.  
) To ret the lamp unit, insert the end of  
the tab F rst, then align the tab G.  
)
Turn the pin B to the left and remove it.  
 
PRACTICAL INFORMATION  
Changing foglamp bulbs  
) Open the tailgate and the lower tail- ) Turn the pin and bulb assembly D to  
gate (refer to the "Access" section)  
and fold down the cover A.  
the left.  
) Remove the bulb.  
To ret, carry out these operations in  
reverse order.  
) Remove the 4 clips B using a screw-  
driver to detach the lamp cover.  
9
) When retting the lamp unit, align  
the clips E with the openings on the  
bodywork.  
) Remove the bolts C and remove the  
lamp unit.