Get COMFORT -> PROGRAMMABLE HEATING Guide for Peugeot 407 4 Door First Generation (2004-2011)

COMFORT

3

PROGRAMMABLE HEATING

Programming remote control

Displaying the functions

The heating system programming re-

mote control consists of the following

buttons and displays:

1. Scrolling functions menu buttons.

2. Function indicator lights: clock,

temperature, operating time, pro-

grammed time, heater operation,

heating management symbols.

3. Digital displays: time, temperature,

duration of operation, programmed

time or level of heating.

4. Off button.

5. On button.

Press the buttons 1 in succession to

display the functions.

The ﬁrst press of the left-hand or right-

hand button displays the time.

Next, the left-hand button permits ac-

cess to the programming time then to

the level of heating (C1 to C5).

The right-hand button permits access

to the passenger compartment temper-

ature then to the duration of operation

of the heater if it is to be switched on

immediately.

The programmable heating operates

independently of the engine.

When the engine is off, it pre-heats

the coolant circuit in order to beneﬁt

from an optimum engine operating

temperature from the time the engine

is switched on.

Displays on the remote control

screen

The programmable heating system is

switched on using the long range remote

control. Activation can be immediate or

deferred by means of a programming

function.

The passenger compartment

temperature information is

only available when the en-

gine is off.

If a malfunction of the programma-

ble heating system occurs, contact

a PEUGEOT dealer.

44

COMFORT

3

Setting the time

Immediate activation

Setting the duration of

operation

Press the buttons 1 to display the du-

ration of operation.

Once the time has been displayed, by

means of the buttons 1, press buttons 4

and 5 simultaneously within 10 seconds.

Press button 5 (ON) until the message

"OK" appears.

When the signal has been received,

the message "OK" is displayed along

with the duration of operation.

This symbol is displayed.

Once the duration of operation has

been displayed, press buttons 4 and 5

simultaneously within 10 seconds.

This symbol ﬂashes.

The heater starts and this sym-

bol is displayed.

Set the time using the buttons 1.

Press buttons 4 and 5 simultaneously

to save it.

To deactivate the function, press but-

ton 4 (OFF) until the message "OK"

appears.

This symbol ﬂashes.

Set the duration by pressing the but-

tons 1 (adjustment in steps of 10 mins

and max value 30 mins).

This symbol is displayed (ﬁxed).

This symbol is switched off.

Press buttons 4 and 5 simultaneously

to save the duration of operation.

When carrying out these oper-

ations, if the message "FAIL"

appears, the signal has not

been received. Repeat the

procedure after changing your

location.

This symbol is displayed (ﬁxed).

The factory setting value is

30 minutes.

45

COMFORT

3

Activation - deactivation

Switching off the heating

Programming the heating

Youmustprogrammeyourdeparturetime

inorder for thesystem tocalculatetheop-

timum heater start time automatically.

Once the programming time has been

displayed by means of the buttons 1,

press button 5 (ON) until the message

"OK" appears.

Press button 5 (ON).

The symbol "HTM" remains on.

When the signal has been received,

the message "OK" is displayed

along with the symbol "HTM".

Changing the level of heating

The system offers 5 levels of heating

(from the lowest level C1 to the high-

est level C5).

Once the level of heating has been

displayed by means of the buttons 1,

press buttons 4 and 5 simultaneously.

The letter "C" ﬂashes.

This symbol is displayed when

the heater starts.

HTM: Heat Thermo Management.

Set the level of heating by pressing

the buttons 1.

Press buttons 4 and 5 simultaneously

to save the level selected. The letter

"C" is displayed (ﬁxed).

To deactivate the programming, press

button 4 (OFF) until the message

"OK" appears.

Programming the departure time

Press the buttons 1 to display the pro-

gramming time.

Thesymbol"HTM"isswitched

off.

This symbol is displayed.

When carrying out these op-

erations, if the message "FAIL"

appears, thesignalhasnotbeen

received. Repeat the procedure

after changing your location.

Once the programming time has been

displayed, press buttons 4 and 5 si-

multaneously within 10 seconds.

The factory pre-sets are re-

placed by the new settings

entered. The programmed

times are stored until the next

time they are changed.

This symbol ﬂashes.

Set the time by pressing the buttons 1

and press buttons 4 and 5 simultane-

ously to save it.

When the departure time is acti-

vated, the level of heating cannot be

changed. The departure time must be

deactivated ﬁrst.

This symbol is displayed (ﬁxed).

46

COMFORT

3

Changing the battery

The remote control is supplied by a

6V-28L battery, which is supplied.

Information on the display indicates

when it is time to replace this battery.

Unclip the casing then replace the

battery.

Always switch off the programmable

heating while ﬁlling with fuel to avoid

any risk of ﬁre or explosion.

To avoid any risk of poisoning and as-

phyxiation, the programmable heating

must not be used, even for short peri-

ods, in an enclosed space such as a ga-

rage or workshop which is not equipped

with an exhaust gas extraction system.

Do not park the vehicle on an inﬂam-

mable surface (dry grass, dead leaves,

paper…), there is a risk of ﬁre.

The remote control must then be reini-

tialised, see below.

Do not discard the used bat-

teries, take them to an ap-

proved collection point.

The programmable heating system

is supplied by the vehicle's fuel tank.

Before use, ensure that the quantity of

fuel remaining is sufﬁcient. If the fuel

tank is at the reserve, we strongly ad-

vise that you do not programme the

heating.

Reinitialising the remote control

If the vehicle's battery is disconnect-

ed or the remote control's battery is

replaced, the remote control must be

reinitialised.

After switching on the power, press

button 4 (OFF) for 1 second within the

next 5 seconds. If the operation has

taken place correctly the message

"OK" is displayed on the remote con-

trol screen.

If a problem occurs, the message

"FAIL" appears. Repeat the operation.

As an accessory, your pro-

grammable heating can be

adapted to pre-heat your vehi-

cle's passenger compartment.

47

COMFORT -> PROGRAMMABLE HEATING for Your Peugeot 407 4 Door First Generation (2004-2011)

Related Topics

COMFORT