Get Driving -> Head-up display Guide for Peugeot 5008 SUV First Generation (2009-2016)

Driving

Head-up display

Buttons

Displays during operation

System which projects various information

onto a transparent strip in the field of vision of

the driver so that they do not have to take their

eyes off the road.

This system operates when the engine is

running and the settings are stored when the

ignition is switched off.

1. Head-up display on / off.

2. Brightness adjustment.

3. Display height adjustment.

Once the system has been activated, the

following information is grouped together in the

head-up display:

A. The speed of your vehicle.

8

B. Cruise control/speed limiter information.

C. "Distance alert" information (depending on

version).

The strip is activated by pressing one of

the buttons.

D. Navigation information (depending on

version).

For more information on the navigation

system, refer to the "Audio equipment and

telematics" section.

161

Driving

Activation / Deactivation

Brightness adjustment

We recommend that adjustments are

only made using these buttons when

the vehicle is stationary.

When stationary or while driving, no

objects should be placed around the

transparent strip (or on its cover) to

avoid blocking the strip output and

preventing its correct operation.

In certain extreme weather conditions

(rain and/or snow, bright sunshine, ...)

the head-up display may not be legible

or may suffer temporary interference.

Certain glasses (sunglasses,

F

With the engine running, press button 1.

The activated/deactivated status when the

engine was switched off is retained when

the engine is switched on again.

F

With the engine running, adjust the

brightness of the information using

button 2:

-

up to increase the brightness,

down to decrease the brightness.

spectacles or polarised lenses) may

hamper reading of the information.

To clean the transparent strip, which

is made of organic glass, use a clean,

soft cloth (such as a spectacles cloth

or microfibre cloth). Do not use a dry or

abrasive cloth or detergent or solvent

products as these could scratch the

strip or damage the anti-reflection

coating.

Height adjustment

F

With the engine running, adjust the display

to the required height using button 3:

-

up to move the display up,

down to move the display down.

162

Driving

Distance alert*

Driving aid which informs the driver of the time

interval (in seconds) separating them from the

vehicle in front when the driving conditions are

stable.

Buttons

Displays during operation

It does not detect stationary vehicles and does

not itself take any action on your vehicle's

controls.

1. On / off.

2. Alert value increase (+) / decrease (-).

The information is grouped together in the

head-up display.

Once the system has been activated:

A. The speed of your vehicle is outside the

operating range.

B. Your vehicle is within the operating range

but no vehicle has been detected.

C. The vehicle in front of you has been

detected.

The current time separating you from this

vehicle is displayed permanently.

D. The time between your vehicle and

the vehicle in front is less than the

programmed alert value (it flashes).

8

For the safety time to be observed, refer

to the current legislation or highway code

recommendations in your country.

The system operates when the speed of your

vehicle is higher than 45 mph (70 km/h) and

below 90 mph (150 km/h).

It has a programmable visual alert which

remains in the memory when the ignition is

switched off.

This system is a driving aid and cannot, in any

circumstances, take the place of vigilance on

the part of the driver.

* Depending on version

163

Driving -> Head-up display for Your Peugeot 5008 SUV First Generation (2009-2016)

Related Topics

Driving