Fittings
Automatic mode
If the blind opens on its own while
Pressing and releasing the control opens or
closes the blind completely. Pressing again
stops the movement.
closing, and immediately after it stops.
F
F
Operate the control until the blind is
fully open.
Operate the control until the blind is
fully closed.
Safety anti-pinch
The safety anti-pinch function is not
operational during these operations.
In automatic mode and at the end of its travel,
if the blind meets an obstacle while closing it
stops and moves back slightly.
5
Reinitialisation: after reconnecting the battery
or in the event of a fault while the blind is
moving, it may be necessary to reinitialise the
system:
If the blind meets an obstacle during
operation, you must reverse the
movement of the blind.
When the driver operates the blind
control, they must ensure that nothing
and no one is preventing the correct
closing of the blind.
F
Operate the control until the blind is fully
closed or open.
F
Continue to press for at least 3 seconds.
A slight movement of the blind will then be
noticeable, confirming the reinitialisation.
The driver must ensure that passengers
use the blind correctly.
Be aware of children when operating
the blind.
111
