Get Lighting and visibility -> Automatic illumination of headlamps Guide for Peugeot 5008 SUV Second Generation (2017-2023)

Lighting and visibility

Headlamp beam height

adjustment

Automatic illumination of

headlamps

0 (Initial setting)

When the ring is at the "AUTO" position and

a low level of ambient light is detected by

the rain/sunshine sensor, the number plate

lamps, sidelamps and dipped beam headlamps

are switched on automatically, without any action

on the part of the driver. They can also come on

if rain is detected, at the same time as automatic

operation of the windscreen wipers.

Driver only or driver + front passenger

1 Driver only or driver + front passenger + row 3

2 7 people

3 7 people + load in the boot

4 Not used

Manual adjustment of the

halogen headlamps

5 Driver only + load in the boot

6 Not used

As soon as the brightness returns to a suﬃcient

level or after the windscreen wipers are switched

oﬀ, the lamps are switched oﬀ automatically.

Automatic adjustment of

the Full LED technology

headlamps

This system automatically adjusts the height of

the headlamp beams according to the load in the

vehicle.

In the event of a malfunction, this warning

lamp comes on on the instrument panel,

accompanied by the display of a message and

an audible signal.

Malfunction

To avoid dazzling other road users, the height

of these headlamp beams should be adjusted

according to the load in the vehicle.

In the event of a malfunction of the rain/

sunshine sensor, the vehicle’s lighting

comes on and this warning lamp is displayed in

the instrument panel, accompanied by an

audible signal and/or the display of a message.

Contact a PEUGEOT dealer or a qualiﬁed

workshop.

0 (Initial setting)

Driver only or driver + front passenger

1 5 people

2 Not used

3 5 people + load in the boot

4 Not used

5 Driver only + load in the boot

6 Not used

The system then places the headlamp beams in

the lowest position.

Have the system checked by a PEUGEOT

dealer or a qualiﬁed workshop.

Do not cover the rain/sunshine sensor

located at the top centre of the

windscreen behind the interior rear view

mirror; the associated functions would no

longer be controlled.

Do not touch the "Full LED" technology

headlamps - risk of electrocution!

In fog or snow, the rain/sunshine sensor

may detect suﬃcient light. In this case,

the lighting will not come on automatically.

Lighting and visibility

For versions without "Automatic illumination

of lamps", the manual guide-me-home lighting

switches oﬀ automatically after 30 seconds.

For versions with "Automatic illumination of

lamps", the period of operation of the manual

guide-me-home lighting is the same as that set

for the automatic guide-me-home lighting.

Whatever the position of the front courtesy lamp

switch, they also come on with the welcome

lighting and guide-me-home lighting functions.

They go oﬀ automatically after 30 seconds.

Guide-me-home and

welcome lighting

Guide-me-home lighting

Automatic

Automatic headlamp

dipping

When the ring is in the "AUTO” position, this

system automatically switches between dipped

and main beam headlamps according to the

lighting and traﬃc conditions, using a camera

located at the top of the windscreen.

With the ring in the "AUTO" position, when the

light is poor, the dipped beam headlamps come

on automatically when the ignition is switched

oﬀ.

You can activate/deactivate this

function and adjust the guide-me-

home lighting duration in the vehicle

conﬁguration menu.

Welcome lighting

When the vehicle is unlocked in low light

conditions and the "Automatic illumination of

headlamps" function is activated, this system

automatically switches on:

– On the outside, sidelamps, dipped beam

headlamps and door mirror spotlamps.

– Inside, courtesy lamps and footwell lighting.

Activation / deactivation and

Manual

adjustment of the duration of the

welcome lighting are set via the vehicle

conﬁguration menu.

Door mirror spotlamps

These spotlamps facilitate access to the vehicle

by lighting the ground near the front doors.

When the front courtesy lamp switch is in

this position, the spotlamps come on

automatically:

– when the vehicle is unlocked.

– when a door is opened.

– when a request to locate the vehicle is

received from the remote control.

This system is a driving aid.

The driver remains responsible for

the vehicle's lighting, its correct use for the

prevailing conditions of light, visibility and

traﬃc, and for observation of driving and

vehicle regulations.

► With the ignition oﬀ, pull the lighting control

stalk toward you ("headlamp ﬂash") to activate/

deactivate the function.

Manual guide-me-home lighting goes oﬀ

automatically after a period of time.

Lighting and visibility -> Automatic illumination of headlamps for Your Peugeot 5008 SUV Second Generation (2017-2023)

Related Topics

Lighting and visibility