Access
rapid flashing of the red indicator lamp in the
button informs you that the alarm was triggered
during your absence. When the ignition is
switched on, this flashing stops.
► Unlock the vehicle by pressing the driver’s
door handle.
► Immediately lock the vehicle using the
remote control or the Keyless Entry and Start
system.
The monitoring system is also deactivated when
the driver approaches the vehicle.
The monitoring system is deactivated: the
indicator lamp in the button goes off and the
direction indicators flash for about 2 seconds.
Only the exterior perimeter monitoring is
activated; the button's red indicator lamp flashes
once every second.
Failure of the remote control
To deactivate the monitoring functions:
To take effect, this deactivation must be
carried out after each time the ignition is
switched off.
► Unlock the vehicle using the key in the front
left-hand door lock.
After unlocking using the remote
control
If the vehicle automatically locks itself again
(as happens if a door or the boot is not
opened within 30 seconds of unlocking), the
monitoring system is automatically activated.
► Open the door; the alarm is triggered.
► Switch on the ignition; this stops the alarm.
Reactivating the interior volumetric and
anti-tilt monitoring
The indicator lamp in the button goes off.
► Deactivate the exterior perimeter monitoring
by unlocking the vehicle using the remote
control or the Keyless Entry and Start
system.
Tracking function
Locking the vehicle
with exterior perimeter
monitoring only
If an attempted theft of the vehicle is detected,
this function sends a notification to the driver's
smartphone.
Access to this function requires prior
subscription to the Manufacturer's connected
alarm service.
For any information relating to the connected
alarm service, contact a PEUGEOT dealer or
refer to the general conditions relating to this
service.
The indicator lamp in the button goes off.
► Reactivate all monitoring by locking the
vehicle using the remote control or the
Keyless Entry and Start system.
Deactivate the interior volumetric and anti-tilt
monitoring to avoid the unwanted triggering of
the alarm, in certain cases such as:
– Presence of an occupant or a pet.
– Slightly open window.
– Washing the vehicle.
– Changing a wheel.
– Towing the vehicle.
– Transport on a ship or ferry.
The red indicator lamp in the button once again
flashes every second.
Triggering of the alarm
Malfunction
This is indicated by sounding of the siren
and flashing of the direction indicators for 30
seconds.
Depending on the country of sale, certain
monitoring functions remain active until the
alarm has been triggered eleven times
consecutively.
When the ignition is switched on, the fixed
lighting of the red indicator lamp in the button
indicates a system malfunction.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
Deactivating the interior volumetric and
anti-tilt monitoring
► Switch off the ignition and within 10 seconds
press the alarm button until its red indicator
lamp is on fixed.
When the vehicle is unlocked using the remote
control or the Keyless Entry and Start system,
► Get out of the vehicle.
42
English 