Download User Manual App

Quickly access user manual for free!

Access -> Panoramic sunroof for Your Peugeot 5008 SUV Third Generation (2024-2025)

Access  
If an electric window meets an obstacle  
Regularly check the condition of the  
during operation, the movement of the  
window must be reversed. To do this, press  
the relevant control.  
When the driver operates the passengers’  
electric window controls, it is important to  
ensure that nothing can prevent the window  
from closing properly.  
It is important to ensure that passengers use  
the electric windows correctly.  
Pay particular attention to children when  
operating the windows.  
Be aware of passengers and/or other persons  
present when closing windows remotely using  
the electronic key.  
Do not put your head or arms through the  
open windows when the vehicle is moving -  
risk of serious injury!  
sunroof seals (e.g. presence of dust, dead  
leaves).  
If using a car wash, check first that the roof is  
correctly closed and keep the high-pressure  
jet at least 30 centimetres from the seals.  
Never leave the vehicle with the sunroof  
open.  
A.  
B.  
Sunroof blind control  
Sunroof control  
Operation  
The sunroof or blind can be operated by these  
buttons when the ignition is turned on (if the  
battery is charged enough), with the engine  
running, in STOP mode of Stop & Start, and up  
to 45 seconds after turning off the ignition.  
When opening the sunroof fully, the movable  
glass moves to a partially open position, then  
slides over the roof. Any intermediate position is  
possible.  
Precautions  
Before operating the sunroof or blind  
control buttons, ensure that no object or  
person might prevent the movement.  
Be particularly aware of children when  
operating the sunroof or blind.  
If something is trapped when operating the  
sunroof or blind, you should reverse the  
movement of the sunroof or blind by pressing  
the control in question.  
Do not put your head or arms through the  
sunroof while the vehicle is moving - risk  
of serious injury!  
Panoramic sunroof  
The panoramic sunroof consists of a movable  
glass panel that slides over the roof and a blind  
that can be opened independently. Opening the  
sunroof automatically opens the blind.  
Do not operate the sunroof if transverse  
roof bars are fitted - risk of serious  
damage! Do not place heavy loads on the  
movable glass panel of the sunroof.  
To operate the panoramic sunroof or the  
blind, use the buttons in the roof console.  
The driver must ensure that passengers use  
the sunroof and blind correctly.  
If the sunroof is wet, following a rain  
shower or washing the vehicle, wait until  
it is completely dry before operating it.  
Do not operate the sunroof if it is covered by  
snow or ice - risk of damage!  
Anti-pinch system  
If the sunroof or blind encounters an obstacle  
when closing, the movement is automatically  
reversed.  
Use only plastic scrapers to remove snow or  
ice from the sunroof.  
44  
Access  
Opening/Closing  
Reinitialisation  
2
To open the sunroof or the blind, use the part  
of the button located towards the rear.  
Following reconnection of the battery or in the  
event of a fault or jerky movement of the sunroof  
or blind, reinitialisation is required.  
To close the sunroof or the blind, use the part  
of the button located towards the front.  
Check that nothing is interfering with the  
sunroof or blind and that the seals are clean.  
Operation of buttons  
With the ignition on, fully close the sunroof  
and blind.  
Pressing a button beyond its point of  
resistance directly opens or closes the  
sunroof or blind fully.  
Press and hold the front part of button B, until  
the sunroof and blind move slightly, then hold  
for a further 1 second before releasing.  
Pressing the button again stops the current  
movement.  
Wait 2 seconds and then press and hold  
the front part of button B. The blind and  
the sunroof will open and close, one after  
the other. When both are completely closed  
again, hold for a further 2 seconds and  
release.  
When holding a button (without going beyond  
the point of resistance), the movement of the  
sunroof or blind stops when this button is  
released.  
When the sunroof is closed: pressing once  
without passing the point of resistance moves  
it to a partially open position.  
If there is an operating fault, restart the  
whole procedure.  
The sunroof and windows, then the blind,  
can be closed by holding down the door  
locking control. The manoeuvre stops by  
pressing the locking control a second time.  
Closing of the blind is limited by the  
position of the sunroof: the blind cannot go  
further than the front of the movable glass.  
During simultaneous movements of the  
sunroof and blind, the blind automatically  
stops or resumes movement depending on  
the position of the sunroof.  
45