Dashboard instruments
Resetting the service indicator
Engine oil level indicator
Coolant temperature
indicator
The service indicator must be reset after each
service.
If you have serviced your vehicle yourself:
1
(Depending on version)
On versions fitted with an electric gauge, the
engine oil level status is displayed on the
instrument panel for a few seconds when
the ignition is switched on, after the servicing
information, in the form of messages.
► Switch the ignition off.
The level read will only be correct if the
vehicle is on level ground and the engine
has been off for more than 30 minutes.
With the engine running:
– In zone A, the temperature is correct.
– In zone B, the temperature is too high. The
associated warning lamp and the STOP warning
lamp light up in red on the instrument panel,
accompanied by the display of a message and
an audible signal.
Low oil level
This is indicated by the message "Oil
level incorrect" on the instrument panel,
accompanied by the lighting of the Service
warning lamp and an audible signal.
If a low oil level is confirmed by a check using
the dipstick, the level must be topped up to avoid
damage to the engine.
► Press and hold the button located on the end
of the lighting control stalk.
You must stop the vehicle as soon as it is
safe to do so.
► Switch on the ignition without starting the
engine; a temporary display window appears
and a countdown begins.
Wait a few minutes before switching off the
engine.
For more information on Checking levels, refer
to the corresponding section.
► When the display indicates =0, a confirmation
message appears; release the lighting
control stalk button and the spanner symbol
disappears.
After switching off the ignition, carefully
open the bonnet and check the coolant
level.
Oil gauge malfunction
This is indicated by the message "Oil level
measurement invalid" on the instrument panel.
Consult a PEUGEOT dealer or a qualified
workshop.
For more information on Checking levels,
refer to the corresponding section.
If you disconnect the battery following this
operation, lock the vehicle and wait at
least 5 minutes for the reset to be registered.
In the event of a malfunction of the electric
gauge, the oil level is no longer monitored.
If the system is faulty, you must check the
engine oil level using the manual dipstick
located in the engine compartment.
Power indicator (Hybrid,
Rechargeable hybrid or
Electric)
Reminder of the servicing information
Servicing information is accessible
using the Settings > Vehicle appli-
cation on the touch screen.
For more information on Checking levels,
refer to the corresponding section.
The power indicator shows in real time the
power demanded from the vehicle.
Then select Safety > Diagnostics.
21