Download User Manual App

Quickly access user manual for free!

Eco-driving -> Eco-driving for Your Peugeot 5008 SUV Third Generation (2024-2025)

Eco-driving  
Comply with the servicing instructions  
At speeds above 31 mph (50 km/h), close the  
windows and leave the air vents open.  
Consider using equipment that can help keep  
the temperature in the passenger compartment  
down.  
Unless automatically regulated, switch off the air  
conditioning as soon as the desired temperature  
has been reached.  
Switch off the demisting and defrosting  
functions, if they are not managed automatically.  
Switch off the heated seat and heated steering  
wheel as soon as possible.  
Adapt your use of the headlamps and/or  
foglamps to the level of visibility, in accordance  
with current legislation in the country in which  
you are driving.  
Avoid running the engine before moving off,  
particularly in winter (other than in severe  
wintry conditions: temperature below -23°C). The  
vehicle will warm up much faster while driving.  
As a passenger, avoid connecting your  
multimedia devices (e.g. film, music, video  
game) to help reduce the consumption of  
energy.  
Eco-driving  
Eco-driving refers to a range of everyday  
practices that allow the motorist to optimise  
the vehicle's energy consumption (fuel and/or  
electricity) and CO2 emissions.  
Check tyre pressures regularly, with the tyres  
cold, referring to the label in the door aperture  
on the driver's side.  
Carry out this check in particular:  
– before a long journey.  
– at each change of season.  
– after a long period out of use.  
Optimise your use of the gearbox  
With an automatic gearbox, favour automatic  
mode. Do not depress the accelerator pedal  
heavily or suddenly.  
The gear shift indicator prompts you to engage  
the most suitable gear. Whenever this indication  
is displayed on the instrument panel, follow it  
straight away.  
Do not forget the spare wheel and, where  
applicable, the tyres on your trailer or caravan.  
Have your vehicle serviced regularly (e.g. engine  
oil, oil filter, air filter, passenger compartment  
filter, etc.). Observe the schedule of operations  
in the manufacturer's service schedule.  
When filling the fuel tank, do not continue after  
the third cut-out of the nozzle, to avoid overflow.  
You will only see the fuel consumption of your  
new vehicle settle down to a consistent average  
after the first 1,900 miles (3,000 kilometres).  
With an automatic gearbox, this indicator  
appears only in manual mode.  
Drive smoothly  
Maintain a safe distance between vehicles, use  
engine braking rather than the brake pedal and  
press the accelerator gradually. These practices  
help to save on energy consumption, reduce  
CO2 emissions and decrease general traffic  
noise.  
With a hybrid engine, engine braking is more  
efficient. Anticipate slowing down as much as  
you can and, if possible, favour deceleration with  
engine braking in order to charge the traction  
battery, to increase all-electric driving and to  
reduce fuel consumption.  
Optimising the driving range of electrified  
vehicles  
The vehicle's consumption of electrical energy  
greatly depends on the route profile, speed and  
driving style, as well as the use of the heating/air  
conditioning.  
Favour the ECO and CHARGE zones of the  
power indicator by driving smoothly and at a  
steady speed.  
Disconnect all portable devices before leaving  
the vehicle.  
Limit the causes of excess consumption  
Spread loads throughout the vehicle. Place the  
heaviest items in the boot as close as possible to  
the rear seats.  
Limit the loads carried in the vehicle and  
minimise wind resistance (e.g. roof bars, roof  
rack, bicycle carrier, trailer). Preferably, use a  
roof box.  
Remove roof bars and roof racks after use.  
At the end of winter, remove snow tyres and refit  
summer tyres.  
Hybrid vehicles  
When the traffic is flowing smoothly, select the  
cruise control.  
Maximise the vehicle's inertia by releasing the  
accelerator pedal so that the vehicle slows  
down by itself (e.g. when driving downhill or  
approaching a traffic light).  
When the accelerator pedal is released,  
provided that the slider on the power indicator  
Control the use of electrical equipment  
Before moving off, if the passenger compartment  
is too warm, ventilate it by opening the windows  
and air vents before using the air conditioning.  
9
Eco-driving  
in the instrument panel is still moving in the  
CHARGE zone, energy recovery is optimal.  
Energy recovery makes it possible to make  
efficient use of the "passive" phases of driving  
(deceleration).  
The intensity of the regenerative braking level  
can be varied using the steering-mounted  
paddles.  
Use the air conditioning rather than the heating  
to demist the passenger compartment.  
The recovered energy is used to recharge the  
traction battery and is then used for all-electric  
driving or further acceleration.  
When the traction battery is almost full, the  
energy recovery is gradually reduced.  
Rechargeable hybrid vehicles  
Connect the vehicle as soon as possible.  
Anticipate slowing down as much as possible  
and, if possible, favour decelerations with the  
regenerative braking function activated (power  
indicator in the CHARGE zone).  
With the vehicle connected, carry out  
temperature pre-conditioning before setting off.  
To optimise consumption during a journey:  
Program a destination into the vehicle’s GPS  
navigation system.  
Select the Hybrid driving mode.  
Make sure that the battery charge level is  
close to maximum.  
Avoid using the e-Save function.  
Use the heating/air conditioning system  
wisely.  
Electric vehicles  
Anticipate the need to slow down, and brake  
smoothly, whenever possible using engine  
braking with the regenerative braking function,  
which will move the power indicator into the  
"CHARGE" zone.  
10