Get Visibility Guide for Peugeot 607 4 Door First Generation (1999-2010)

VISIBILITY

Dipped/main beam change

Direction indicators (ﬂashers)

LIGHTS STALK

 Pull the stalk fully towards you.

Left: downwards.

Right: upwards

Lights on

With the ignition and the automatic

lights function switched off, on open-

ing the driver's door a buzzer sounds

to warn you that you have left your

lights on.

Note: if you forget to return the

direction indicator to its nor-

mal position, the volume of the

audible signal will increase, if

you are driving at a speed greater than

50 mph (80 km/h).

Front and rear fog lamps (ring B)

Parking lights

The parking lights are lit on the side

the trafﬁc is on.

With the engine switched off, place the

indicator lights stalk on the trafﬁc side

(for example: for parking on the right;

switching on of the lights on the left).

 Turn ring B forwards to switch on

and backwards to switch off. The

position is conﬁrmed by the light on

the instrument panel.

Front and rear lights (ring A)

 Turn ring

required.

to the position

This is indicated by an audible sig-

nal and lighting of the corresponding

direction indicator on the instrument

panel.

Lights off

Front fog lamps (one press).

These operate with the side lights,

dipped headlamps or main beam

headlamps.

Automatic "follow-me-home" lighting

Side lights

When you leave your vehicle with the

automatic switching on of the lights

activated, the side lights and dipped

headlamps remain on for the duration

selected when the ignition is switched

off.

To deactivate or activate this func-

tion, pass via the multifunction display

"Personalisation-Conﬁguration"

menu.

Rear fog lamps (two presses)

Dipped/main beam head-

lamps

These operate with the side lights and

the front fog lamps, or with the dipped

headlamps.

VISIBILITY

The

timed

duration

Deactivation

Automatic switching on of the

lights

must also be set, via

the multifunction dis-

play "Personalisation-

Conﬁguration" menu.

When the function is deacti-

vated, the indicator light on

the instrument panel comes

on.

Side lights and dipped beam head-

lamps switch on automatically if the

light is poor, or during operation of the

windscreen wipers. They switch off

as soon as the light becomes bright

enough or the windscreen wipers

stop.

Note: in foggy weather, the brightness

sensor can detect sufﬁcient light. As a

consequence, the lights will not come

on automatically.

Cancellation:

If the brightness sensor does not

function correctly, the system acti-

vates the function (the lights come

on) and the dipped beam headlamps

indicator light on the instrument panel

ﬂashes.

 ﬂash the headlamps,

 get out of the vehicle and lock it.

Manual "follow-me-home" lighting

Contact a PEUGEOT dealer to have

the system checked.

In the absence of the automatic switch-

ing on of the lights, the manual "follow-

me-home" lighting can be activated.

This function is active when the vehi-

cle is supplied to the customer.

When you leave your vehicle, the side

lights and dipped headlamps remain

on for approximately 1 minute.

To switch the function on

or off, use the multifunction

display "Personalisation-

Conﬁguration" menu.

Daytime lights*

On vehicles which are equipped with

daytime lights, the dipped headlamps

come on when the vehicle is started.

Activation:

This warning light comes on on

the instrument panel screen.

 switch off the engine,

 ﬂash the headlamps,

 get out of the vehicle and lock it.

Activation

The instruments and controls

(instrument panel, multifunc-

tion display, air conditioning

Deactivation:

When this function is acti-

vated, the indicator light on

the instrument panel comes

on.

control panel, ...) are only lit

 ﬂash the headlamps again,

 get out of the vehicle and lock it.

on switching to the automatic switch-

ing on of the lights mode or when the

lights are switched on manually.

The brightness of the display

and of the instrument panel

may change when the lights

are switched on automatically.

* According to country.

VISIBILITY

The

timed

duration

Deactivation

Automatic switching on of the

lights

must also be set, via

the multifunction dis-

play "Personalisation-

Conﬁguration" menu.

When the function is deacti-

vated, the indicator light on

the instrument panel comes

on.

Side lights and dipped beam head-

lamps switch on automatically if the

light is poor, or during operation of the

windscreen wipers. They switch off

as soon as the light becomes bright

enough or the windscreen wipers

stop.

Note: in foggy weather, the brightness

sensor can detect sufﬁcient light. As a

consequence, the lights will not come

on automatically.

Cancellation:

If the brightness sensor does not

function correctly, the system acti-

vates the function (the lights come

on) and the dipped beam headlamps

indicator light on the instrument panel

ﬂashes.

 ﬂash the headlamps,

 get out of the vehicle and lock it.

Manual "follow-me-home" lighting

Contact a PEUGEOT dealer to have

the system checked.

In the absence of the automatic switch-

ing on of the lights, the manual "follow-

me-home" lighting can be activated.

This function is active when the vehi-

cle is supplied to the customer.

When you leave your vehicle, the side

lights and dipped headlamps remain

on for approximately 1 minute.

To switch the function on

or off, use the multifunction

display "Personalisation-

Conﬁguration" menu.

Daytime lights*

On vehicles which are equipped with

daytime lights, the dipped headlamps

come on when the vehicle is started.

Activation:

This warning light comes on on

the instrument panel screen.

 switch off the engine,

 ﬂash the headlamps,

 get out of the vehicle and lock it.

Activation

The instruments and controls

(instrument panel, multifunc-

tion display, air conditioning

Deactivation:

When this function is acti-

vated, the indicator light on

the instrument panel comes

on.

control panel, ...) are only lit

 ﬂash the headlamps again,

 get out of the vehicle and lock it.

on switching to the automatic switch-

ing on of the lights mode or when the

lights are switched on manually.

The brightness of the display

and of the instrument panel

may change when the lights

are switched on automatically.

* According to country.

Visibility for Your Peugeot 607 4 Door First Generation (1999-2010)

Related Topics

Popular Owner Manuals

Latest Owner Manuals