146
PRACTICAL INFORMATION
The headlamps are fitted with polycarbonate glass with a
CHANGING A BULB
Front lights
Note: handle the bulbs with a dry cloth.
1 - Dipped beam headlamps: H7-55 W or xenon bulb.
2 - Main beam headlamps: H7-55 W or xenon bulb.
protective coating. Do not clean them with a dry or abra-
sive cloth, nor with a detergent or solvent product. Use
a sponge and soapy water.
4 - Side lights: W 5 W.
☞ Push the light from the inside towards the outside of
the bumper.
☞ Pull the light forwards.
WARNING: RISK OF ELECTROCUTION
Xenon bulbs must be changed by a
PEUGEOT dealer.
☞ Turn the bulb holder a quarter turn to the left and
remove it.
3 - Fog lamps: H1-55 W.
Note: make access on the right-hand side easier by remo-
ving the fuse box cover.
☞ Turn the bulb a quarter turn to the left, remove it and
change it.
When refitting, engage the light towards the outside
and move it towards the inside of the bumper.
☞ Turn the protective cover corresponding to the
faulty bulb a quarter of a turn and remove it.
☞ Disconnect the connector.
☞ Press the end of the securing clip to free it. Change
the bulb.
☞ When fitting the new bulb, ensure that the direction
notches are positioned correctly and the securing
clip is fixed properly.
☞ Reconnect the connector.
☞ Refit the protective cover, then turn it a quarter of a
turn to the right.
5 - Direction indicators: PY 21 W (amber).
☞ Turn the bulb holder a quarter of a turn to the left
and remove it.
☞ Change the bulb.
Note: In certain climatic conditions (low temperature,
humidity), condensation inside the headlamp glass is
normal; it disappears a few minutes after the lights are
switched on.
12-05-2003
English 
