Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

PRACTICAL INFORMATION -> Checking Levels and Fluids for Your Peugeot 807 4 Door First Generation (2002-2014)

141  
PRACTICAL INFORMATION  
Viscosity selection  
Unscrew the cap two turns to allow  
the pressure to drop to prevent any  
risk of scalding. When the pressure  
has dropped, remove the cap and  
top up the level.  
CHECKING THE LEVELS  
Oil level  
In all cases, the oil selected must  
meet the manufacturer's require-  
ments.  
Check the level regularly and top up  
between changes (maximum con-  
sumption is 0.5 l per 600 miles  
(1 000 km).  
Note: The coolant does not need to  
be changed.  
Brake fluid level:  
– The level must always be between  
the DANGER and MAXIMUM  
marks in the reservoir.  
– If the level drops substantially,  
contact a PEUGEOT dealer imme-  
diately.  
Used oil  
Do not dispose of used oil, brake  
fluid or coolant into drains or onto the  
ground.  
Note: checking is carried out with  
the vehicle level, engine cold, using  
the oil level gauge on the control  
module or the dipstick.  
Power steering reservoir  
Fluid change:  
– must be carried out according to  
the manufacturer's schedule  
– use fluids recommended by the  
manufacturer, which fulfil DOT4  
standards.  
Open the reservoir, with the engine  
at ambient temperature. The level  
should always be above the MINI  
mark and close to the MAXI mark.  
Dipstick  
There are two marks  
on the dipstick:  
A = maximum.  
Windscreen and headlamp*  
wash level  
For best quality cleaning and for  
your safety, we recommend that you  
use products recommended by  
PEUGEOT.  
Never fill past this  
mark.  
Note: brake fluid is harmful to health  
and very corrosive. Avoid any con-  
tact with the skin.  
B = minimum.  
To maintain the reliabi-  
lity of engines and  
emission control sys-  
tems, the use of addi-  
tives in engine oil is  
prohibited.  
Coolant level  
Measure the fluid level using the dip-  
stick incorporated in the reservoir  
cap (vehicles fitted with headlamp  
wash).  
Close the air hole on the cap and  
remove it, then check the level.  
Use fluid recommended by the manu-  
facturer.  
When the engine is warm, the tem-  
perature of the coolant is controlled  
by the engine fan. As this fan can  
operate with the ignition off and  
because the cooling system is pres-  
surised, wait for at least one hour  
after the engine has stopped before  
carrying out any work.  
Oil change  
According to the information given in  
"PEUGEOT SERVICING".  
Note: Prevent used oil from coming  
into prolonged contact with the skin.  
* According to destination.  
12-05-2003