Get TECHNOLOGY on BOARD Guide for Peugeot Bipper Van First Generation (2007-2018)

Trip computer

TRIP COMPUTER

If tRIP B is activated in the vehicle

configuration menu:

Press the SET / Back button for more than

two seconds to return to the home screen.

using the TRIP button, located at the end of

the wiper stalk, you can display the following

information in succession:

-

trip B,

-

Ambient temperature,

Average fuel consumption B,

Average speed B,

trip duration B.

Range,

trip A,

Average fuel consumption A,

Current fuel consumption A,

Average speed A,

trip duration A.

Zero reset

Press the TRIP button for more than two

seconds to reset the displayed data to zero.

5

Vehicle conﬁguration

CONFIGURATION /

PERSONALISATION OF THE VEHICLE

Level 1 screen

Level 2 screen

Control panel

-

Speed (speed beep).

Refer to the corresponding line of the

configuration - personalisation table on the

following pages.

the side control panel located beside the

steering wheel provides access to screen

menus allowing personalisation of some of

your systems.

eight languages are available: Italian,

english, german, French, Spanish,

Portuguese, Dutch and turkish.

time (Setting the time).

Buzz (Volume for announcements).

unit (units of measurement).

Bag p (Passenger's airbag).

Refer to the corresponding line of the

configuration - personalisation table on the

following pages.

As a safety precaution, the menus can

only be accessed when the ignition is

off (engine off).

Vehicle conﬁguration

This button enables you to:

This button enables

you to:

-

scroll up through a menu,

- access the menus and

sub-menus,

-

increase a value.

-

confirm your selections within a menu,

exit from the menus.

This button enables you to:

-

scroll down through a menu,

A long press enables you to return to the

home screen.

-

decrease a value.

Sub-

menu...

Confirm

and exit

Menu...

Press...

Select...

Enables you to...

ON

Increase

Activate/Deactivate the audible

signal indicating exceeding of the

programmed speed.

1 Speed beep

2 Activate trip B

Decrease

Modify the speed setting.

OFF

ON

Activate

Deactivate

Increase

Decrease

24 h

Display a second trip,

"trip B".

OFF

Hours

Adjust the clock

3 Set

time

Select the display mode for the

clock.

Format

12 h

Increase

Decrease

Year /

Month / Day

4 Set date

Adjust the date.

5

Vehicle conﬁguration

Confirm

and exit

Menu...

Press...

Sub-menu...

Press...

Select...

Enables you to...

Display the name of the station.

Display the CD track

number.

ON

5 See radio

6 Autoclose

OFF

ON

Activate/Deactivate the

automatic locking of the doors

above 12 mph (20 km/h)

While moving

Distances

OFF

Km

Select the distance display

unit.

Mi(les)

°C

Select the temperature display

unit.

7

Measurement unit

temperature

Consumption

°F

km/l

l/100 km

Select the fuel consumption

display unit.

list of

8 language

languages

available

Select the display language.

Increase

Increase/Decrease the volume

of the signals and warnings

(the change is immediate when

the button is pressed).

9

Volume of

announcements

Decrease

Increase

10 Button

Increase/Decrease the volume

for the buttons.

volume

Decrease

Vehicle conﬁguration

Confirm

and exit

Menu...

Press...

Sub-menu...

Press...

Select...

Enables you to...

Display the miles/kilometres

remaining before the next oil

change.

(Km/Miles before

oil change)

11 Service

Display the engine

oil level.

Yes

No

Activate the passenger's front

airbag.

ON

12 Bag p

Yes

No

Deactivate the passenger's

front airbag.

OFF

Quit the menu.

13 exit from menu

Press the arrow at the bottom

to go to the first menu.

5

Parking sensors

REAR PARKING SENSORS

the audible system consists of four

proximity sensors, fitted in the rear bumper.

It detects any obstacle which comes within

range: person, vehicle, tree, fence, behind

the vehicle during the manoeuvre.

However, it will not be able to detect

obstacles located immediately below the

bumper.

An object, such as a stake, a roadworks

cone or any other similar object may be

detected at the beginning of the manoeuvre

but may no longer be detected when the

vehicle moves close to it.

Operation

Ending operation

engage reverse gear with the gear lever.

the proximity information is indicated by an

audible signal which becomes more frequent

as the vehicle approaches the obstacle.

When the distance between the rear of

the vehicle and the obstacle is less than

approximately thirty centimetres, the audible

signal becomes continuous.

this function will be deactivated

automatically if a trailer is being towed.

You are advised to obtain a towbar

recommended by PeugeOt and have it

installed by a qualified workshop.

Come out of reverse gear and into neutral.

Operating fault

If this warning lamp or the service

warning lamp comes on in the instrument

panel, accompanied by a message in the

screen, contact a PeugeOt dealer or a

qualiﬁed workshop.

Good practice

In bad weather or in winter, ensure that the

sensors are not covered with mud, ice or

snow.

this system does not take the place of

vigilance on the part of the driver.

Audio equipment

Requires a

long press.

FIRST STEPS

Control panel

Selection of the AM waveband.

use the left/right arrows for an automatic station search.

use the up/down arrows for a manual station search.

Setting the audio options: bass, treble, fader (front/rear), balance

(left/right), loudness, eQ Preset (equaliser).

use the up/down arrows to select the option.

use the left/right arrows to increase or decrease the value of the option

or change the equaliser.

CD eject.

Volume Increase/

Decrease.

Access to the menu.

use the up/down arrows to

select one of the following

functions:

On.

Off.

● AF switching.

● Traffic info.

Mute On/Off.

● Regional mode.

● MP3 display.

● Speed volume.

Selection of the FM waveband.

Automatic storing of stations

(autostore AS).

● External audio vol.

● Radio off.

Selection of the CD/CD MP3 source.

use the left/right arrows to select the

previous/next track.

use the left/right arrows to fast forward/

backward playing of the current track.

In CD MP3 mode: use the up/down arrows

to change folder.

● Restore default.

use the left/right arrows to

change the setting of the

function selected.

1/2/3/4/5/6: selection of the stored station.

Storing a station.

5

Audio equipment

FIRST STEPS

RADIO: select the next preset station

down.

CD: select the previous track.

CD MP3: select the previous folder.

Steering

mounted

controls

Increase volume.

Mute On / Off.

Change audio source: RADIO /

CD / CD MP3.

Select waveband: FM1 / FM2 /

FMt / MW / lW.

Bluetooth hands-free system*.

Reduce volume.

RADIO: select the next preset station up.

CD: select the next track

* For more information on the using the Bluetooth hands-free system,

refer to the corresponding section.

CD MP3: select the next folder.

Audio equipment

The volume of the trafﬁc information is

independent of the volume of the other sources.

You can adjust it using the volume button during

trafﬁc announcements; this setting will be stored

for the next announcement.

Press the "3" or "4" button to activate (ON) or

deactivate (OFF) the tA function.

On the FM waveband, "tA" appears on the

display if the tA function is activated and

"TPM" appears if the station broadcasts trafﬁc

information.

"MP3" appears on the display if the function

is activated and the CD contains tracks in

the MP3 format.

"AUDIO FUNCTIONS" MENU

Press the MENU button

on the audio equipment to

gain access to the "Audio

functions" menu.

Press the "5" or "6" button to

select one of the conﬁgurable

audio functions below.

Automatic volume control

"Speed Volume"

Press the "3" or "4" button to minimise

(lOW), maximise (HIgH) or deactivate

(OFF) the automatic control of the volume in

relation to the vehicle speed.

RDS "AF Switching"

the RDS (Radio Data System) enables you

to continue listening to the same station,

regardless of the frequency that it uses in

your current location. the audio equipment

continuously searches for the transmitter

which offers the best reception for the

station.

Press the "3" or "4" button to activate (ON)

or deactivate (OFF) the RDS.

On the FM waveband, "AF" appears on

the display if the RDS is activated and the

station is broadcasting with the RDS.

"External Audio Vol"

"Regional Mode"

Press the "3" or "4" button to decrease

(down to 0 minimum), increase (up to

40 maximum) or deactivate (OFF) the

volume of the external source (e.g.: hands-

free kit).

Some stations, organised in a network,

broadcast regional programmes in the

various areas which they serve. the regional

mode allows you to choose to continue

listening to the same programme.

Press the "3" or "4" button to activate (ON)

or deactivate (OFF) the Reg function.

On the FM waveband, "lOC" appears on the

display if the Reg function is activated and

the station finds a local frequency.

Programmed switching off "Radio Off"

Press the "3" or "4" button to programme

the switch-off time of "00 MIN" or "20 MIN".

this countdown is taken into account with

the doors closed and the key in the STOP

position.

"Traffic Info"

All traffic information announcements will be

given priority regardless of which source is

currently playing.

the eON (enhanced Other Networks) system

links stations which belong to the same network.

It allows you to receive traffic information

transmitted by a station which belongs to the

same network as the station to which you

are listening.

"Restore Default"

Press the "3" or "4" button to retain the

modified values (NO) or restore the default

values (YeS).

"Restoring" appears on the display during

the resetting of the configuration values.

"MP3 Display"

Press the "3" or "4" button to display the

track number or the MP3 CD information

(Artist/Album/Folder/File/title/time elapsed).

5

Audio equipment

CD

MP3

PLAYING A CD OR AN MP3 COMPILATION

the MP3 format, an abbreviation of MPeg 1.2 & 2.5 Audio

layer 3, is an audio compression standard which permits the

recording of several tens of music files on a single disc.

Insert circular compact discs only.

Some anti-pirating systems, on original

discs or CDs copied using a personal

recorder, may cause faults which are no reflection on the

quality of the original player.

In order to be able to play a recorded CDR or CDRW, when

recording it is preferable to select standards ISO 9660

level 1.2 or Joliet.

If the disc is recorded in another format, it may not be played

correctly.

Insert a CD or an MP3 compilation in

the player, play begins automatically.

If the player already contains a disc,

press the CD button.

1

2

It is recommended that the same recording standard is

always used for an individual disc, with as low a speed as

possible (4x maximum) for optimum sound quality.

In the particular case of a multi-session CD, the Joliet

standard is recommended.

Press one of the buttons to select a

track on the CD.

the audio equipment will only play files with the extension

".mp3" with a sampling rate of 22.05 KHz or 44.1 KHz. No

other type of file (.wma, .mp4, m3u...) can be played.

It is advisable to restrict file names to 20 characters without

using special characters (e.g.: () " " ? ; , space ) to avoid any

playing or displaying problems.

Bluetooth hands-free system

BLUETOOTH HANDS-FREE SYSTEM

INTRODUCTION

this system allows you to:

-

send and receive calls via the Bluetooth^®connection with your mobile telephone,

display the names of your contacts and numbers from the directory of your mobile phone in the instrument panel screen,

use voice commands to make a call and manage your contacts while keeping both hands on the steering wheel,

hear your text messages via the voice synthesiser built into the system,

listen to MP3, WMA, AAC, M4A, MP4 and WAV audio files from a uSB storage device,

display information on the track being played in the radio screen (title, artist, etc…),

control vocally a portable music player (iPod^®type),

recharge your portable music player (iPod^®type) via the uSB port.

KEY

Indicates that a long press is required to start the action described.

Voice mode

Requires a press on the steering mounted "voice" control before speaking the desired voice command.

Speak the designated voice command clearly and distinctly.

5

Bluetooth hands-free system

PRESENTATION

Display, USB port, controls

Bluetooth hands-free system

PRESENTATION

Description of the steering mounted controls

-

Activate the main menu.

Confirm the current menu option.

Accept the incoming call.

Switch one telephone conversation to

another.

Display of the menus and directories of the files

being played (uSB storage device).

-

Select a visual message.

Reject an incoming telephone call.

end the current telephone call.

uSB connection port. Remove the plastic cover to

connect your portable player.

-

Confirm the current menu option.

transfer he telephone conversation

from the hands-free system to the

mobile telephone and vice versa.

Select the audio source.

-

Select the text displayed.

Pause/resume the file being played

(portable player).

-

Deactivate voice recognition.

Interrupt the voice message.

exit from the main menu.

exit from a sub-menu and return to the

previous menu option.

Adjustment of the volume of

the functions: hands-free, audio

and text message player, voice

announcements.

-

exit without storing.

Deactivate/reactivate the microphone

during a telephone conversation.

Set the volume of the incoming call ring

to zero.

-

Scroll the menu options.

-

Activate voice recognition.

Interrupt the voice message in order to

issue a new voice command.

Select the files to be played

(portable player).

-

Scroll the list of text messages.

-

Repeat the last voice message.

5

Bluetooth hands-free system

PRESENTATION

Description of voice commands

By pressing this button and saying "Help", you have access to the list of voice commands available at any time or by saying "Help"

after a system message.

You can access the main menu of the system via the voice command by pressing this button.

the main voice commands for navigating in the menu are the following:

lASt CAllS

HeNRY BRIDgeS

CHRIStOPHeR ANDReW

123456789

OK

PHONeBOOK

MeSS. ReADeR

HeNRY BRIDgeS

CHRIStOPHeR ANDReW

123456789

ReAD lASt

IN BOX

OK

VIS+ACOuSt

VIS. SIgNAl

ReADeR OFF

Delete All

SIgNAl tYPe

OK

MeDIA PlAYeR

uSB OPtION*

Set uSB

PlAY ANYtHINg

FOlDeRS**

ARtIStS

geNReS

AlBuMS

PlAYlIStS

tRACK PlAY

SHuFFle

OK

tRACK lOOP

SettINgS

OK

uSeR DAtA

PAIRINg

COPY PHONeBOOK

Delete uSeRS

Delete PHONeBOOK

Delete All

ADVANCeD OPtIONS

eXIt

ADD CONtACtS

* If the system is activated.

** Not available on iPod^®.

Bluetooth hands-free system

MOBILE TELEPHONE WITH HANDS-FREE FUNCTION

Pairing a mobile telephone

When prompted by the telephone, enter the

PIN displayed in the instrument panel.

If the pairing has been successful, the

system announces "Connecting".

the name of the telephone identified

appears in the instrument panel screen,

pairing is confirmed.

"Settings"\wait for a

response\"Pairing".

Pairing consists of setting your vehicle's

Bluetooth^®system to recognise your mobile

telephone.

For this you must activate the Bluetooth^®

function of your telephone and set its

visibility.

this number, which permits

recognition of your mobile

telephone, is generated

randomly by the system.

Pressing MAIN or eSC during the pairing

phase may cancel the procedure.

If the pairing fails, an error message will

appear; in this case, repeat the procedure.

It is communicated by the instrument panel

screen and is repeated verbally by the

system.

With the ignition on, activate the

main menu.

this PIN is independent of your SIM card

and your mobile's access code.

Select SettINgS.

Once your handset has been paired, there is

no need to keep a record of this number.

If you change your mobile telephone, you

must repeat the pairing procedure as you

will be given a new PIN.

Confirm.

Select PAIRINg.

look for the option which displays

the Bluetooth^®system detected

by your telephone.

Confirm.

When the system has been

identified, a message appears in

your telephone (My car, …).

5

Bluetooth hands-free system

Downloading your phonebook

Calling a contact recorded in the

phonebook

"Call [Name of the person]"\

wait until the information relating

to the person (name, tel. n°, ...)

appears\

"Yes" to make the call or "No"

to cancel.

There are 2 options:

Your telephone's phonebook must first be

downloaded into the system.

1 - Following the pairing procedure, the

system suggests downloading your

telephone's phonebook.

Activate the main menu.

Pressing conﬁrms your agreement.

If the person has more than one number:

Select the number.

Select PHONeBOOK.

"Yes" starts the download.

Confirm.

Pressing declines this download.

Confirm to make the call.

Select the group with which

the person to be contacted is

associated.

"No" declines.

Specify "Home" or "Work",

or "NeXt" or "PReVIOuS".

Press OK to make the call.

2 - You can download the phonebook later

Confirm.

via the menu:

Activate the main menu.

Select the name.

Select SettINgS then uSeR

DAtA then PHONeBOOK.

Confirm to make the call, if the

person has only one number.

"Settings"\"user

data"\"Download phonebook".

Bluetooth hands-free system

Making a call by dialling a number

Ending a call

Press and hold.

Incoming call

If the person is recorded in

the phonebook, his name is

displayed.

By means of the voice commands only

"Dial/Dial a number"\

Say the number character by

character (+, #, *), digit by

digit (0 to 9).

Press to accept the call.

the system displays and

verbally repeats the number

recognised.

Press and hold to decline the

call.

Press to ignore the call, however,

the call is stored in the log of

incoming calls.

"Call" if the number is correct.

or

"Cancel" to cancel dialling of the

number.

"Start over" to delete and start

dialling another number.

"Repeat" to hear the number again.

During a call, if a second incoming call

is received.

Press to switch the conversation

and place the other person on

hold.

5

Bluetooth hands-free system

Transferring an active call

Call list

"Callback" for the last person who

called you, or

"Redial" for the last person you

called.

"Yes" or "No" to confirm/cancel.

the "Redial" button can also be

used.

the system will again ask "Redial or

callback?".

"Callback" to call back the last

person who called you.

"Redial" to redial the last person you

called.

There are 2 options:

1 - From the mobile telephone to the hands-

free system

With the ignition on, the recognition

connection between the mobile telephone

and the vehicle's audio equipment is done

automatically.

Confirm this recognition using the keypad on

the mobile telephone.

this enables you to call the number of one

of the last 10 calls received, of one of the

last 10 people called or of one of the last

5 missed calls.

Activate the main menu.

Select CAll lISt.

the call can then be transferred.

Confirm.

2 - From the hands-free system to the

mobile telephone

Press, the system's controls are

still active.

Select the number to be called.

Confirm.

Placing a call on hold

Press to deactivate the

microphone and place your

contact on hold.

Press again to resume the

conversation.

Bluetooth hands-free system

VOICE COMMANDS

Settings/pairing

the key words which can be recognised by the system are organised into three levels (levels 1, 2 and 3).

When you say a level 1 command, the system makes the level 2 commands available; when you say a level 2 command, the

system makes the level 3 commands available.

Level 1

Level 2

Level 3

Actions

Activation of the hands-free system SettINgS menu.

Activation of the uSeR DAtA menu.

Delete users

Deletion of the data recorded for all of the users.

Delete contacts/

Delete directory/

Delete numbers

Deletion of the phone book data.

user data

Copy phone book/

Copy phonebook/

Copy numbers

transfer of the phone books from your mobile telephone to the

hands-free system (available according to the type of mobile

telephone).

Settings

Adjust

Configure

transfer of the names from your mobile telephone to the hands-free

system (available according to the type of mobile).

Add Contacts

Deletion of the pairing data and of the phone books/contacts of all

of the telephones paired, with restoration of the default settings of

the hands-free system.

Delete all

Pairing/Pair/Pair the user

Advanced options

Activation of the pairing procedure for a new mobile telephone.

Activation of the ADVANCeD OPtIONS menu.

5

Bluetooth hands-free system

VOICE COMMANDS

Mobile telephone with hands-free function

the key words which can be recognised by the system are organised into three levels (levels 1, 2 and 3).

When you say a level 1 command, the system makes the level 2 commands available; when you say a level 2 command,

the system makes the level 3 commands available.

Level 1

Level 2

Level 3

Actions

One, two, ..., Plus,

entering the digits or symbols to dial the telephone number.

Deletion of the last group of digits entered.

Star, Hash

Delete/Correct

Start over

Repeat

Deletion of all of the groups of digits entered with the option of

entering a new number.

Dial/Dial a number

Call/Dial

Repeating the telephone number entered and recognised by the

hands-free system.

Cancel

Cancellation of dialling of the number.

Sending the call to the number entered verbally.

Yes/No

Mobile

Call to the name of the person, stored in the system's phone book.

Call

[ Name ]

Call to the name of the person with personalisation if there are

several numbers stored in the system.

Home

Work/Office

Redial

Call to the last person called.

Callback

Call to the last person who called.

Bluetooth hands-free system

TEXT READER

Only on mobile telephones with this

function

Read the last text received

Activate the main menu.

List of text messages

the system can hold around 20 text

messages. If the list is full, reception of a

new text message causes the deletion of the

oldest text message.

If your mobile telephone includes this

function, every time a text message is

received, the system produces an audible

signal and offers to read the text message

vocally.

Select MeSS. ReADeR.

to go to a specific text message:

Activate the main menu.

Read an incoming text message

Confirm.

to read the text received.

Select MeSS. ReADeR.

Select ReAD lASt.

"Yes" starts the playback of the text

received.

Confirm.

to save a message and read it

later.

Select IN BOX.

Confirm.

"No" to save the message and read

it later.

"Read last" starts playback of

the last text message received.

5

Bluetooth hands-free system

Select the desired text message.

Deleting all text messages

Activate the main menu.

Information settings

Activate the main menu.

Conﬁrm to read the text message.

Select MeSS. ReADeR.

Select Delete All.

Confirm.

"Message reader" then after the

audible signal "message received".

"Previous" or "Next" moves through

the list of text messages.

Confirm.

Select SIgNAl tYPe.

"Read" starts reading of the text

message selected.

the system asks you to confirm your choice:

Confirm to delete.

Confirm to select from the

3 choices available:

Managing text messages

During reading of the message:

Activate the main menu.

to cancel.

-

Audio + visual: the system signals the

receipt of a message audibly and visibly

and offers to read it.

-

Visual only: reception of a message is

signalled visibly in the instrument panel.

Choose the desired option.

Off: the text message reader is

deactivated.

"Message reader" then after the

audible signal "Delete all".

the system requests confirmation,

reply with: "Yes" to confirm or "No"

to cancel.

"Message reader" then after the

audible signal "Signal type".

the system lists the options, select

between: "Reader deactivated", "Audio

and visual info" or "Visual info only".

"Read" starts reading of the message.

"erase" deletes the message.

"Call" allows you to contact the

sender of the message.

Bluetooth hands-free system

VOICE COMMANDS

Message reader

the key words which can be recognised by the system are organised into three levels (levels 1, 2 and 3).

When you say a level 1 command, the system makes the level 2 commands available; when you say a level 2 command,

the system makes the level 3 commands available.

Level 1

Level 2

Level 3

Actions

Activation of the MeSS. ReADeR menu.

Activation of the list of text messages received.

Reads the text message selected in the list.

Deletion of the phone book data.

Read/ read again

Messages received /

Received

CAll

Message reader

Messages

transfer of the phone books from your mobile telephone to the

hands-free system (available according to the type of mobile).

Delete

Back / Next / NeXt

Back / PReVIOuS

go to the next text message in the list

go to the previous test message in the list.

Read last / read last message / read message Read the last text message received.

Delete all / Delete messages / Delete Delete all text messages in the list after confirmation.

5

Bluetooth hands-free system

Level 1

Level 2

Level 3

Actions

Activation of the MeSS. ReADeR menu.

Deactivation of the info settings function.

Deactivate reader /

Reader not active /

Reader off

Visual and audible

info / Visual and

audible / Visual plus

audible / Audible

Deactivates the reading of text messages.

Read messages /

Messages

type of info / Info

Reception of a text message is signalled in the instrument panel

screen and by an audible signal.

Visual info only /

Only visual / Visual

Reception of a text message is signalled only in the instrument

panel screen.

Bluetooth hands-free system

PORTABLE AUDIO DEVICE PLAYER

Audio tracks in .mp3, .wma, .wav format

and playlists with the extension .wpl are

recognised by the system.

Autoplay

Selecting tracks

Activate the main menu.

USB port

Select MeDIA PlAYeR.

Select SettINgS then MeDIA

PlAYeR then tRACK PlAY.

Connect the device to the

uSB port directly or using an

appropriate cable (not provided).

Confirm.

Ignition on:

-

activates the recognition connection and

automatically starts the playlist,

Choose one of the selection

modes:

Select ReADeR or ReADeR

OFF.

-

or activates automatic play if the system

is programmed to autoplay.

FOlDeRS, ARtIStS, geNReS,

AlBuMS, PlAYlIStS, SHuFFle

(random play of tracks in the

playlist).

Confirm.

Otherwise, select the track to be

played via the menu.

"Media player", then "uSB

options" and finally choose

"Folders", "Artists", ...

the PLAY ALL function enables you

to listen to the entire content of a

selection mode (folders, artists, ...).

5

Bluetooth hands-free system

Previous track

Pressing:

Changing the sound source

Press to select the audio source

(Radio, CD, Media player).

Confirm.

-

within 3 seconds following the start of

play enables you to play the previous

track.

Select the file.

Start play.

after 3 seconds enables you to listen to

the current track again.

"Previous".

Next ﬁle

Displaying the ﬁle information

this function is only available by voice

command.

Press to play the next file.

"Next".

"track info".

Pausing/resuming play

Pressing suspends or resumes

play.

"Stop" to interrupt playback. "Play"

to continue playback.

the voice function "Play" is only

available if playback has been

previously interrupted by the "Stop"

command.

Bluetooth hands-free system

VOICE COMMANDS

Portable audio device

the key words which can be recognised by the system are organised into three levels (levels 1, 2 and 3).

When you say a level 1 command, the system makes the level 2 commands available; when you say a level 2 command,

the system makes the level 3 commands available.

Level 1

Player/Multimedia player/Media player

Play/Play the track/Play the multimedia file

Stop/Stop the track/Stop the multimedia file

Next/Next track

Actions

Activation of the MeDIA PlAYeR menu.

Activation of play.

Interruption of playing of the current file.

go to the next menu or file.

Previous/Previous track/Back

Shuffle on/Random play on

go to the previous menu or file.

Activation of playing of the files in random order.

Deactivation of playing of the files in random order.

Activation of playing of the files in a loop.

Deactivation of playing of the files in a loop.

Shuffle off/Random play off

track repeat on/Repeat on/Repeat

track repeat off/Repeat off

Now playing/track information/What is playing/What is this?

uSB media settings/uSB settings

Display of the information for the file currently being played.

Activation of the MeDIA PlAYeR menu.

Activate automatic play

Activation of automatic play on connection of a portable device.

Deactivate automatic play

Shuffle/Any/Random

Deactivation of automatic play on connection of a portable device.

Activation of play of all tracks in random order

5

Bluetooth hands-free system

Level 1

Level 2

Level 3

Actions

Activation of the MeDIA PlAYeR menu.

Advanced uSB options/Other options

Folder/explore

Activation of playback options.

folders/Consult list of Activation of FOlDeRS menu.

folders

Player/Multimedia

player/Media player /

Player

Artists/list of artists

Activation of ARtIStS menu.

Activation of geNReS menu.

genres/list of

genres

Album/list of albums Activation of AlBuMS menu.

Playlist/list of tracks Activation of PlAYlIStS menu.

TECHNOLOGY on BOARD for Your Peugeot Bipper Van First Generation (2007-2018)

Related Topics

Popular Owner Manuals

Latest Owner Manuals