Seat belts
Driver's seat belt not
fastened warning lamp
When the vehicle is started, this
warning lamp comes on if the
driver has not fastened their seat
belt.
CREW CAB
Each rear seat is fitted with a three-point
inertia reel seat belt.
Use the seat belt to restrain one person only
per seat.
Fastening
SEAT BELTS
Pull the strap in front of you, with an even
movement, ensuring that it does not twist.
CAB SEAT BELTS
If the driver's seat belt is unfastened,
START mode of Stop & Start will not be
invoked. Engine restarting is only possible
with the ignition key.
The front seats are fitted with pre-tensioners
and force limiters.
Secure the buckle in its housing.
Check that the seat belt is fastened securely
and that the automatic locking system is
operating correctly by pulling the strap
rapidly.
The bench rear seat is fitted with two seat
belts.
If you install a bench seat after handover, it
must be fitted with seat belts.
Unfastening
REAR SEAT BELTS
Height adjustment
Press the "red" button on the buckle
housing, the seat belt rolls up automatically
but you are advised to guide it.
The seats/bench seats are fitted with three-
point seat belts and inertia reels.
Squeeze the control with the return and slide
the assembly on the driver's seat side and
on the side passenger seat side.
The centre seat has a seat belt guide and
inertia reel, solid with the seat back.
As a safety precaution, these
operations should not be carried out
while the vehicle is moving.
The height of the seat belt associated with
the centre seat cannot be adjusted.
5
English 