Changing a wheel
-
-
If a pressure of at least 3 bars is not
reached within 5 minutes, disconnect
the compressor from the valve and the
power socket, then move the vehicle
forward by approximately 10 metres to
distribute the sealant fluid inside the
tyre.
Then repeat the inflating operation:
● if a pressure of at least 3 bars is not
reached within 10 minutes, switch off
your vehicle: the tyre has suffered
too much damage and repair has not
been possible. Consult a PEUGEOT
dealer.
Checking and adjusting the pressure
Replacing the sealant fluid cartridge
To replace the cartridge, carry out the
following operations:
The compressor can only be used to check
and adjust the pressure.
● if the tyre has been inflated to a
pressure of 4 bars, set off again
immediately.
-
-
disconnect the hose I,
turn the cartridge to be replaced
anticlockwise and lift it,
-
Disconnect the hose I and connect it to
the tyre valve directly; the cartridge will
then be connected to the compressor
and the filling fluid will not be injected.
After driving for approximately 10 minutes,
stop and check the pressure of the tyre again.
-
-
insert the new cartridge and turn it
clockwise,
reconnect the hose I and connect the
hose B in its location.
Adjust the pressure if necessary and contact
a PEUGEOT dealer as soon as possible.
If it is necessary to deflate the tyre, connect
the hose I to the tyre valve and press the
yellow button, placed in the centre of the
switch on the compressor.
The cartridge contains ethylene-glycol,
a product which is harmful if swallowed
and which causes irritation to the eyes.
Keep out of reach of children.
After use, do not discard the cartridge in the
environment, take it to a PEUGEOT dealer
or to an organisation responsible for its
collection.
This replacement kit is available from
PEUGEOT dealers.
English 