Advertisement

Advertisement

Technical Data -> Weights for Your Peugeot Boxer Van First Generation (1994-2002)

Changing a wiper blade  
CHANGING A WIPER BLADE  
The steps, located in the front bumper,  
enable you to access the blades and the  
screenwash nozzles.  
Changing a front wiper blade  
Changing the rear wiper blade  
Lift the wiper arm.  
Lift the wiper arm, then unclip the blade and  
remove it.  
Unclip the blade by pressing the button and  
remove it by pulling it outwards.  
Fit the new blade and push back the wiper arm.  
Fit the new blade and ensure that it is  
secured correctly.  
Check that the screenwash or headlamp  
wash nozzles are not blocked.  
Push back the wiper arm.  
To return the windscreen wipers to their  
normal position, switch on the ignition  
and operate the wiper stalk.  
8
 
Having your vehicle towed  
BEING TOWED  
Without lifting  
From the rear  
(four wheels on the ground)  
Hook the bar onto the rigid eye located  
under the bumper.  
You must always use a towing bar.  
From the front  
With lifting  
(2 wheels only on the ground)  
The removable towing eye is located in the  
box under the front passenger seat.  
It is preferable to lift the vehicle using  
professional lifting equipment.  
Unclip the cover using a flat tool.  
Screw the removable towing eye in fully.  
Place the gear lever in neutral. Failure to  
observe this special condition may result in  
damage to certain braking components and  
the absence of braking assistance when the  
engine is re-started.  
When being towed with the engine  
off, there is no braking or steering  
assistance.