Get Technical data Guide for Peugeot Ion 4 Door First Generation (2010-2020)

Technical data

Motor and main battery

Model type code:

1 N ZKY Z

Y51

Electric motor

Technology

Synchronous with neodymium permanent magnets

Max. power: EU standard (kW)

Max. power speed (rpm)

Max. torque: EU standard (Nm)

Max. torque speed (rpm)

49

4,000 to 8,800

196

0 to 300

Main battery

Lithium-Ion

Energy when new (kWh)

Normal charge

14.5

Voltage (V) AC

230

(

Charging time ⁽*⁾**⁾:

-

16 A

14 A

10 A

8 A

Approximately 6 hours

6 hours

8 hours

11 hours

Fast charge

Voltage (V) DC

300

Charging time (80% charge)**

30 minutes

* Depending on the power supply in the country.

** Time measured for exterior temperatures between 20 and 25° C. Depending on the use of the audio system and/or the air conditioning, charging may

take longer.

Range varies according to the exterior climatic conditions, the driver's style of driving, the use of electrical equipment, the frequency of normal or fast

charges and ageing of the main battery.

140

Technical data

Weights (in kg)

Electric motor

Y51

Main battery

Lithium-Ion

Model type code:

1 N ZKY Z

1 065

1 140

1 450

43

Unladen weight

Kerb weight

Gross vehicle weight (GVW)

Gross train weight (GTW)

Maximum load on the roof (including the roof bars)

Your vehicle cannot be fitted with a towbar. It cannot tow a trailer.

9

141

Technical data

Dimensions (in mm)

142

Technical data

Identiﬁcation markings

Various visible markings for the identification of your vehicle.

C. Manufacturer's plate.

This plate is riveted to the left-hand centre

pillar.

D. Vehicle identification number (VIN).

This number is engraved on the inner wheel

arch, inside the boot, right-hand side.

For information on fitting snow chains,

contact a PEUGEOT dealer or a

qualified workshop.

A. Service - Replacement Parts

identification plate.

This plate is riveted to the underside of the

bonnet.

B. Tyre identification label.

This label is affixed to the driver's centre pillar.

The original tyres fitted to the vehicle

may have a load index or speed rating

higher than those given on the label;

this has no effect on the inflation

pressures.

It bears in particular the following information:

It bears the following information:

-

the vehicle model.

the paint code.

the type, variant, version, etc.

-

the tyre pressures (in bars).

the tyre specification.

the type of tyre.

9

143

Technical data

Checking tyre pressures

The tyre pressures should be checked when

cold at least monthly.

The pressures given on the label are valid

for cold tyres. If you have driven for more

than 10 minutes or for more than 6 miles

(10 kilometres) at more than 30 mph (50 km/h),

the tyres will be warm; in this case 0.3 bar

(30 kPa) should be added to the pressures

given on the label.

Never reduce the pressure of a

warm tyre.

Low tyre pressures increase your

vehicle's power consumption, therefore

reducing its range.

144

Technical data for Your Peugeot Ion 4 Door First Generation (2010-2020)

Related Topics