Technical data -> Identification markings for Your Peugeot Ion 4 Door First Generation (2010-2020)

Technical data  
Identification markings  
Various visible markings for the identification of your vehicle.  
C. Manufacturer's plate.  
This plate is riveted to the left-hand centre  
pillar.  
D. Vehicle identification number (VIN).  
This number is engraved on the inner wheel  
arch, inside the boot, right-hand side.  
For information on fitting snow chains,  
contact a PEUGEOT dealer or a  
qualified workshop.  
A. Service - Replacement Parts  
identification plate.  
This plate is riveted to the underside of the  
bonnet.  
B. Tyre identification label.  
This label is affixed to the driver's centre pillar.  
The original tyres fitted to the vehicle  
may have a load index or speed rating  
higher than those given on the label;  
this has no effect on the inflation  
pressures.  
It bears in particular the following information:  
It bears the following information:  
-
-
-
the vehicle model.  
the paint code.  
the type, variant, version, etc.  
-
-
-
the tyre pressures (in bars).  
the tyre specification.  
the type of tyre.  
9
143  
Technical data  
Checking tyre pressures  
The tyre pressures should be checked when  
cold at least monthly.  
The pressures given on the label are valid  
for cold tyres. If you have driven for more  
than 10 minutes or for more than 6 miles  
(10 kilometres) at more than 30 mph (50 km/h),  
the tyres will be warm; in this case 0.3 bar  
(30 kPa) should be added to the pressures  
given on the label.  
Never reduce the pressure of a  
warm tyre.  
Low tyre pressures increase your  
vehicle's power consumption, therefore  
reducing its range.  
144