Access and starting - 61
Notes:
- The side openings D can be used
as hooking points.
- The rear bumper has been
strengthened to serve as a footrest
on entering the vehicle.
REAR ROOF FLAP
LONG LOAD SUPPORT BAR
To open the rear lap:
- pull the lever A,
- lift the rear lap,
- pass the point of resistance to se-
cure it using the support struts B.
A support bar is provided for trans-
porting long loads, after opening the
rear roof lap.
Fold back the support bar by lifting
the lever C.
Support it to the door pillar.
Support the long loads to be trans-
ported.
Reposition the support bar with one
hand.
Ensure that it is secured correctly.
Never drive without the sup-
port bar in place.
The rear doors only lock when
the support bar is installed.
To close the rear lap:
- check that the support bar is se-
cured correctly,
- lower the rear lap to lock it.
When the rear roof lap is open, take
care when driving where height is
restricted.
Use a regulation device when a load
protrudes from your vehicle by more
than one metre.
Never rest a load directly on the rear
doors.
01-02-2005
English 
