54 - Access and starting
The remote control
Locking
Press button A to lock the vehicle.
This is conirmed by ixed lighting of
the direction indicators for approxi-
mately two seconds.
Unlocking
Press button B to unlock the vehicle.
This is conirmed by rapid lashing of
the direction indicators.
THE KEYS
Changing the battery of the
remote control
The information "battery lat" is given
by an audible signal accompanied by
the message "Remote control bat-
tery lat" on the screen.
To change the battery, unclip the cas-
ing using a coin at the ring (CR 2016/
3 volt battery).
If the remote control does not work
after the battery has been changed,
re-programme the remote control.
The keys allow you to switch on the
ignition and operate the passenger
air bag disarming switch as well as to
independently operate the locks on
the doors and the fuel iller cap.
Note: if the vehicle is locked and
unlocking is activated inadvertently,
unless the doors are opened within
30 seconds, the vehicle will lock au-
tomatically.
Central locking
From the front doors, the keys allow
you to lock and unlock the doors and
tailgate.
If one of the doors or the tailgate is
open, the central locking does not
work.
Locating your vehicle
To locate your vehicle, if you have
locked it, in a car park:
F press button A, the courtesy lights
come on and the direction indica-
tors lash for a few seconds.
Programming the remote
control
F Switch off the ignition.
The remote control performs the
same functions at a distance.
F Switch the ignition on again.
F Press button A immediately for a
few seconds.
F Switch off the ignition and remove
the remote control key from the
ignition lock. The remote control
is now working again.
01-02-2005
English 
