Ease of use and comfort
Then press "Programmable heating/
ventilation".
► Select the "Status" tab to activate/deactivate
the system.
Rear heating and air
conditioning
3
► Select the "Other settings" tab to choose
the "Heating" mode, to heat the engine and
passenger compartment, or "Ventilation" to
ventilate the passenger compartment.
► Then set/save the time at which the
preheating temperature will be reached for each
selection.
Heating
This is an additional and separate system which
heats the passenger compartment and improves
defrosting performance.
Press this button to save.
This indicator lamp is lit while the system
is programmed or set in operation
remotely via the remote control.
With PEUGEOT Connect Nav
► Press the "Applications" menu.
It flashes during the whole duration of the
heating and goes off at the end of the heating
cycle or when stopped using the remote control.
If your vehicle is so equipped, the temperature of
the air distributed by the system is the same as
the selection for the front.
► Press the "Vehicle Apps" tab.
► Press "Temperature programming".
► Press the "Status" tab to activate/deactivate
the system.
Ventilation
Air flow
This system allows ventilation of the passenger
compartment with exterior air to improve the
temperature experienced on entering the vehicle
in summer.
► Press the "Parameters" tab to select
"Heating" mode to heat the engine and
passenger compartment or "Ventilation" mode
to ventilate the passenger compartment.
► Then set/save the activation time for each
selection.
► Press one of the buttons 2 to increase/
decrease the air flow.
Additional heating/
ventilation system
Only available for Diesel vehicles.
Programming
► Press "OK" to confirm.
With PEUGEOT Connect Radio
You must allow at least 60 minutes
between programming operations.
Press Connect-App to display the main
page.
79
English 
