Advertisement

Download User Manual App

Quickly access user manual for free!

Ease of use and comfort -> Temperature conditioning (Electric) for Your Peugeot Partner Van Third Generation (2015-2023)

Ease of use and comfort  
workshop which is not equipped with an  
exhaust gas extraction system.  
Do not park the vehicle on a flammable  
surface (dry grass, dead leaves, paper, etc.)  
- Risk of fire!  
Programming  
Programming can be carried out from a  
smartphone using the MYPEUGEOT APP  
application.  
For more information on Remote functions,  
refer to the corresponding section.  
Operating conditions  
– The function is only activated when the  
ignition is switched off and the vehicle  
locked.  
– When the vehicle is not connected, the  
function is only activated if the battery charge  
level is greater than 50%.  
– When the vehicle is not connected and a  
recurring programme is active (e.g. from Monday  
to Friday), if two temperature pre-conditioning  
sequences are run without the vehicle being  
used, the programme will be deactivated.  
3
Glazed surfaces such as the rear screen  
or windscreen can become very hot in  
places.  
Never put objects on these surfaces; never  
touch these surfaces - Risk of burns!  
With PEUGEOT Connect Nav system  
In the Applications menu:  
Press "Car Apps" to display the applications  
home page.  
Select Temperature conditioning.  
Do not throw remote control batteries  
away, as they contain metals that are  
harmful to the environment. Take them to an  
approved disposal point.  
Courtesy lamp  
► Press + to add a programme.  
► Select the time of entry into the vehicle and  
the desired days. Press OK.  
► Press ON to activate this programme.  
The temperature pre-conditioning sequence  
begins approximately 45 minutes before the  
programmed time when the vehicle is connected  
(20 minutes when it is not connected) and is  
maintained for 10 minutes after.  
Automatic switching on/off  
The front courtesy lamp comes on when the key  
is removed from the ignition switch.  
All courtesy lamps come on when the vehicle is  
unlocked, when one of the corresponding doors  
is opened and when locating the vehicle using  
the remote control.  
They fade to off after the ignition is switched on  
and when the vehicle is locked.  
Temperature conditioning  
(Electric)  
This function allows you to programme the  
temperature in the passenger compartment to  
reach a pre-defined, non-modifiable temperature  
(approx. 21°C) before you enter the vehicle, on  
the days and at the times of your choice.  
This function is available when the vehicle is  
connected or not connected.  
You can set multiple programmes.  
Each one is saved in the system.  
To optimise the driving range, we recommend  
starting a programme while the vehicle is  
connected.  
Take care not to allow objects to come  
into contact with the courtesy lamp.  
The fan noise that occurs during  
temperature pre-conditioning is perfectly  
normal.  
81