RUNNING OUT OF FUEL (DIESEL)
On vehicle fitted with HDi engines, the fuel system must be primed
manually if you run out of fuel; refer to the corresponding engine
compartment view.
2.0 HdI ENGINE
F
F
F
F
F
Fill the fuel tank with at least five litres of Diesel.
Open the bonnet.
If necessary, unclip the style cover for access to the priming pump.
Slacken the bleed screw.
Squeeze and release the priming pump repeatedly until fuel
appears in the transparent pipe.
F
F
Tighten the bleed screw.
Operate the starter until the engine starts (if the engine fails to start
at the first attempt, wait around 15 seconds before trying again).
F
F
F
If the engine fails to start after a few attempts, operate the priming
pump again, then the starter.
If the engine does not start first time, don't keep trying but start the
procedure again from the beginning.
Put the style cover back in position and clip it in place, ensuring that
it has clipped correctly.
Close the bonnet.
144
English