Get DRIVING -> Speed limiter Guide for Peugeot Rcz 2 Door First Generation (2009-2015)

STEERING MOUNTEd CONTROL

SPEED LIMITER

System which prevents the vehicle from exceeding the speed

programmed by the driver.

When the programmed speed limit is reached, pressing the accelerator

pedal no longer has any effect.

The speed limiter is switched on manually: it requires a programmed

speed of at least 20 mph (30 km/h).

The speed limiter is switched off by manual operation of the control.

The programmed speed can be exceeded temporarily by pressing the

accelerator ﬁrmly.

The functions of this system are grouped together on steering mounted

control.

To return to the programmed speed, simply slow down to a speed below

the programmed speed.

1. Speed limiter mode selection dial.

2. Value decrease button.

The programmed speed remains in the memory when the ignition is

switched off.

3. Value increase button.

4. Speed limiter on / off button.

The speed limiter cannot, in any circumstances, replace the need to respect

speed limits, nor can it replace the need for vigilance on the part of the driver.

129

dISPLAYS IN THE INSTRUMENT PANEL

PROGRAMMING

F

Turn dial 1 to the "LIMIT" position: the speed

limiter mode is selected but is not switched on

(OFF / Pause).

The programmed information is grouped together in the instrument

panel screen.

You do not have to switch the speed limiter on in order

to set the speed.

5. Speed limiter on / off indication.

6. Speed limiter mode selection indication.

7. Programmed speed value.

F

Set the speed value by pressing button 2 or 3

(e.g.: 55 mph (90 km/h)).

You can then change the programmed speed using

buttons 2 and 3:

-

by + or - 1 mph (km/h) = short press,

by + or - 5 mph (km/h) = long press,

in steps of + or - 5 mph (km/h) = maintained press.

F

Switch the speed limiter on by pressing button 4.

Switch the speed limiter off by pressing button 4: the display

conﬁrms that it has been switched off (OFF / Pause).

Switch the speed limiter back on by pressing

button 4 again.

130

EXCEEdING THE PROGRAMMEd SPEEd

OPERATING FAULT

In the event of a speed limiter malfunction, the speed is cleared

resulting in ﬂashing of the dashes.

Pressing the accelerator pedal to exceed the

programmed speed will not have any effect unless you

press the pedal ﬁrmly past the point of resistance.

Have it checked by a PEUGEOT dealer or a qualiﬁed workshop.

The speed limiter is deactivated temporarily and the

programmed speed, which is still displayed, ﬂashes.

Returning to the programmed speed, by means of intentional or

unintentional deceleration of the vehicle, automatically cancels the

ﬂashing of the programmed speed.

EXITING THE SPEEd LIMITER MOdE

On a steep descent or in the event of sharp acceleration,

the speed limiter will not be able to prevent the vehicle from

exceeding the programmed speed.

F

Turn dial 1 to the "0" position: the speed limiter mode is deselected.

It disappears from the display.

To avoid any risk of jamming of the pedals:

-

ensure that the mat is positioned correctly,

-

do not ﬁt one mat on top of another.

131

DRIVING -> Speed limiter for Your Peugeot Rcz 2 Door First Generation (2009-2015)

Related Topics

DRIVING