Get EASE OF USE and COMFORT -> Front seats Guide for Peugeot Rcz 2 Door First Generation (2009-2015)

Seat height adjustment

FRONT SEATS

Seat with integral head restraint, consisting of a seat cushion and a seat

back which can be adjusted to adapt your position for ease of driving

and comfort.

MANUAL AdjUSTMENTS

Forwards-backwards adjustment

F

Pull the control lever upwards to raise or push it downwards to

lower, as many times as necessary, to obtain the position required.

Seat back angle adjustment

F

Raise the control bar and slide the seat forwards or backwards.

Before moving the seat backwards, ensure that there is nothing

that might prevent the full travel of the seat, so as to avoid the risk

of of jamming the seat caused by the presence of objects on the

ﬂoor behind the seat or rear passengers. If the seat jams, stop the

movement immediately.

F

Turn the knob to set the angle required.

50

Seat cushion height adjustment

FRONT SEATS

Seat with integral head restraint, consisting of a seat cushion and a seat

back which can be adjusted to adapt your position for ease of driving

and comfort.

The electrical functions of the seat are deactivated approximately

one minute after the ignition is switched off.

To reactivate them, switch on the ignition.

Carry out these adjustments with the engine running to avoid

discharging the battery.

ELECTRIC AdjUSTMENTS

Forwards-backwards adjustment

F

Tilt the rear part of the control upwards or downwards to obtain the

required height.

Seat back angle adjustment

F

Push the control forwards or rearwards to slide the seat.

Before moving the seat backwards, ensure that there is nothing

that might prevent the full travel of the seat, so as to avoid the risk

of of jamming the seat caused by the presence of objects on the

ﬂoor behind the seat or rear passengers. If the seat jams, stop the

movement immediately.

F

Tilt the control forwards or rearwards to adjust the angle of the seat

back.

51

MANUAL LUMBAR AdjUSTMENT

HEATEd SEATS CONTROL

With the engine running, the front seats can be heated separately.

F

Turn the knob manually to obtain the desired level of lumbar

support.

F

Use the adjustment dial, placed on the side of each front seat, to

switch on and select the level of heating required:

0: Off.

1: Low.

2: Medium.

3: High.

52

RECALLING A STOREd POSITION

STORING DRIVING POSITIONS

System which takes into account the electrical settings of the driver's

seat and the door mirrors. It enables you to store two positions using

the buttons on the side of the driver's seat.

Using button 1 or 2

F

Press and hold button 1 or 2 until the audible signal is heard

indicating the end of the adjustment.

When the ignition is off, after a few consecutive position recalls,

the function will be deactivated until the engine is started,

to prevent discharging of the battery.

STORING A POSITION

Using buttons M / 1 / 2

F

Switch on the ignition.

Adjust your seat and your door mirrors.

Press button M, then press button 1 or 2 within four seconds.

An audible signal is heard indicating that the settings have been

stored.

Storing a new position cancels the previous position.

53

EASE OF USE and COMFORT -> Front seats for Your Peugeot Rcz 2 Door First Generation (2009-2015)

Related Topics

EASE OF USE and COMFORT