Get MONITORING Guide for Peugeot Rcz 2 Door First Generation (2009-2015)

Panel grouping together the vehicle operation indication dials and

warning lamps, with permanent back-lighting.

INSTRUMENT PANELS: PETROL OR

DIESEL, MANUAL OR AUTOMATIC

GEARBOx

dIALS

1. Rev counter.

With small central display screen

Indicates the speed of rotation of the engine (x 1 000 rpm).

2. Coolant temperature gauge.

Indicates the temperature of the engine coolant (°Celsius).

3. Fuel gauge.

Indicates the quantity of fuel remaining in the tank.

4. Speedometer.

Indicates the current speed of the moving vehicle (mph or km/h).

5. Small display screen.

6. Central display screen.

7. display management button.

Starts a manual CHECK.

Recalls the service information.

Resets the selected function to zero (trip distance recorder or

service indicator).

With large central display screen

8. Lighting dimmer button.

Adjusts the brightness of the lighting of the instruments and

controls.

For more information, refer to the section relating to the button or

function and its associated display.

12

dISPLAYS

Small display screen

A. Trip distance recorder.

(miles or km)

B. distance recorder.

(miles or km)

C. Service spanner, if a service is due shortly or is overdue.

Central display screen

d. Speed limiter

(mph or km/h) or

Cruise control.

E. Indication of:

-

a gear change*,

or

-

the programme or gear (automatic gearbox).

F. Engine oil level indicator,

service indicator.

(miles or km)

These two functions are displayed when the ignition is switched on,

then disappear after a few seconds.

Warning and status indicator lamps / CHECK.

Trip computer.

Alert messages**.

Vehicle speed repeat**.

Navigation - Guidance**.

These functions are displayed according to the selection.

* According to engine.

** Only with the large central display screen.

13

WARNING ANd INdICATOR LAMPS

Visual indicators which inform the driver of the occurrence of a

fault (warning lamp) or of the operation of a system (operation or

deactivation indicator lamp).

When the ignition is switched on

Warning lamps

Certain warning lamps come on for a few seconds when the ignition is

switched on.

When the engine is running or the vehicle is being driven, the

illumination of one of the following warning lamps indicates a fault which

requires action on the part of the driver.

When the engine is started, these warning lamps should go off.

If they remain on, before moving off, refer to the information for the

warning lamp concerned.

Associated warnings

The illumination, ﬁxed or ﬂashing, of certain warning lamps may be

accompanied by an audible signal and a message in the screen.

Depending on your version of instrument panel, illumination of the

warning lamp is also accompanied by:

-

a symbol in the central instrument panel screen and a message in

the multi-function screen,

or

a symbol and a message in the central instrument panel screen.

The illumination of a warning lamp is always accompanied by the

display of an additional message, to assist you in identifying the

fault.

If you encounter any problems, contact a PEUGEOT dealer or a

qualiﬁed workshop.

14

Warning/indicator lamp

is on

Cause

Action / Observations

ﬁxed, alone

or associated

with another

Illumination of this warning lamp

is associated with a serious fault

with the braking system, power

steering, engine lubrication

Stop as soon as it is safe to do so as there is a risk that the

engine will cut out while driving.

warning lamp,

accompanied by

an audible signal

and a message

in the screen.

STOP

Park, switch off the ignition and contact a PEUGEOT

dealer or a qualiﬁed workshop.

system or cooling system.

You must stop as soon as it is safe to do so.

ﬁxed, associated

with the STOP

warning lamp.

The braking system ﬂuid level is

too low.

Top up with brake ﬂuid recommended by PEUGEOT.

If the problem persists, have the system checked by a

PEUGEOT dealer or a qualiﬁed workshop.

Braking

+

ﬁxed, associated

with the STOP

and ABS warning

lamps.

You must stop as soon as it is safe to do so.

The electronic brake force

distribution (EBFD) system has

a fault.

Have it checked by a PEUGEOT dealer or a qualiﬁed

workshop.

Stop as soon as it is safe to do so.

Maximum

coolant

temperature

ﬁxed with the

needle in the red

zone.

Wait until the engine has cooled down before topping up

the level, if necessary.

The temperature of the cooling

system is too high.

If the problem persists, contact a PEUGEOT dealer or a

qualiﬁed workshop.

15

Warning/indicator lamp

is on

Cause

Action / Observations

Identify the fault by reading the message shown in the

screen, such as, for example:

-

opening of the doors, boot or bonnet,

low engine oil level,

low screenwash level,

ﬂat remote control battery,

A minor fault has occurred for

which there is no speciﬁc warning

lamp.

saturation of the particle emission ﬁlter (Diesel)

As soon as trafﬁc conditions permit, regenerate the

ﬁlter by driving at a speed of at least 36 mph (60 km/h)

until the service warning lamp goes off.

a fault with the tyre under-inﬂation detection system,

...

on temporarily.

Service

-

For any other faults, contact a PEUGEOT dealer or a

qualiﬁed workshop.

A major fault has occurred for

Identify the fault by reading the message shown on the

ﬁxed.

which there is no speciﬁc warning screen and contact a PEUGEOT dealer or a qualiﬁed

lamp.

workshop.

Risk of destruction of the catalytic converter.

Have it checked by a PEUGEOT dealer or a qualiﬁed

workshop.

The engine management system

has a fault.

ﬂashing.

ﬁxed.

Engine

autodiagnosis

system

The warning lamp should go off when the engine is started.

If it does not go off, contact a PEUGEOT dealer or qualiﬁed

workshop without delay.

The emission control system has

a fault.

Refuel as soon as possible to avoid running out of fuel.

Until sufﬁcient fuel has been added, this warning lamp

will come on every time the ignition is switched on,

accompanied by an audible signal and a message.

The audible signal and message are repeated with

increasing frequency as the fuel level drops towards "0".

ﬁxed with the

needle in the

red zone,

accompanied by

an audible signal

and a message.

When it ﬁrst comes on there

remains approximately 5 litres of

fuel in the tank.

At this point, you begin to use the

fuel reserve.

Low fuel level

Fuel tank capacity: approximately 55 litres.

Never continue to drive until you run out of fuel, as this

could damage the emission control and injection systems.

16

Warning/indicator lamp

is on

Cause

Action / Observations

The vehicle retains conventional braking.

Anti-lock

Braking

System (ABS)

The anti-lock braking system has

a fault.

ﬁxed.

Drive carefully at reduced speed and contact a PEUGEOT

dealer or a qualiﬁed workshop without delay.

The DSC/ASR regulation is

operating.

The system optimises traction and improves the directional

stability of the vehicle in the event of loss of grip or trajectory.

ﬂashing.

dynamic

stability control

(dSC/ASR)

The DSC/ASR system has a

fault.

Have it checked by a PEUGEOT dealer or a qualiﬁed

workshop.

ﬁxed.

directional

headlamps

The directional headlamps

system has a fault.

Have it checked by a PEUGEOT dealer or a qualiﬁed

workshop.

ﬂashing.

The driver or front passenger has

not fastened or has unfastened

their seat belt.

ﬁxed, then

ﬂashing in the

passenger's seat

belt and front

airbag warning

lamp display.

Pull on the belt in question and insert the tongue in the

buckle.

Seat belt not

fastened /

unfastened

For more information, refer to the "Seat belts" section.

At least one rear passenger has

unfastened their seat belt.

Check the pressure of the tyres as soon as possible.

The pressure in one or more

wheels is too low.

ﬁxed.

This check should preferably be carried out when the tyres

are cold.

Under-inﬂation

+

ﬂashing then ﬁxed,

accompanied

by the Service

warning lamp.

Under-inﬂation detection is not assured.

The tyre pressure monitoring

system has a fault or no sensor is

detected on one of the wheels.

Have the system checked by a PEUGEOT dealer or a

qualiﬁed workshop.

17

Operation indicator lamps

If one of the following indicator lamps comes on, this conﬁrms that the

corresponding system has come into operation.

It may be accompanied by an audible signal.

Depending on your version of instrument panel, illumination of the

indicator lamp may also be accompanied by:

-

a symbol in the central instrument panel screen and a message in

the multifunction screen,

or

-

a symbol and a message in the central instrument panel screen.

Warning/indicator lamp

is on

Cause

Action / Observations

Left-hand

direction

indicator

ﬂashing with

buzzer.

The lighting stalk is pushed

down.

Right-hand direction ﬂashing with

indicator buzzer.

The lighting stalk is pushed up.

The hazard warning lamps

switch, located on the dashboard,

has been operated.

Hazard warning ﬂashing with

The left-hand and right-hand direction indicators and their

associated indicator lamps ﬂash simultaneously.

lamps

audible signal.

The lighting stalk is in the

"Sidelamps" position or the

"AUTO" position with low light.

Sidelamps

ﬁxed.

The lighting stalk is in the

"Dipped beam headlamps"

position or in the "AUTO" position

in conditions of low light.

dipped beam

headlamps

ﬁxed.

The lighting stalk is pulled

towards you.

Pull the stalk again to return to dipped beam

headlamps.

Main beam

headlamps

18

Warning/indicator lamp

is on

Cause

Action / Observations

The rear foglamp has been

switched on using the ring on the

lighting control stalk.

Turn the ring on the lighting control stalk to the rear to

switch off the rear foglamp.

Rear foglamp

ﬁxed.

Wait until the warning lamp goes off before starting.

The period of illumination of the warning lamp is

determined by the ambient conditions (up to about thirty

seconds in very low temperatures).

diesel engine

pre-heating

The key is at position 2

(ignition on) in the ignition switch.

If the engine does not start, switch the ignition off and then

on, wait until the warning lamp goes off again, then start

the engine.

Release the parking brake to switch off the warning lamp,

keeping your foot on the brake pedal.

The parking brake is applied or

not properly released.

Parking brake

ﬁxed.

Observe the safety recommendations.

For more information on the parking brake, refer to the

corresponding section.

The control switch, located on

the passenger's side of the

dashboard, has been placed in

the "ON" position.

While you do not have a rearward facing child seat ﬁtted

to the front passenger seat, it is recommended that the

passenger's front airbag be activated.

ﬁxed on the

seat belt and

passenger's front

airbag warning

lamps display.

Passenger's

front airbag

The passenger's front airbag is

activated.

On the other hand, before ﬁtting a rearward facing child

seat, you must turn the control switch to the "OFF"

position.

In this case, do not install a

"rearward facing" child seat.

19

deactivation warning lamps

The other deactivation indicators appear in the form of symbols in the

large screen, located in the centre of the instrument panel.

Their display may be accompanied by an audible signal and a message

in the screen.

Warning/indicator lamp

is on

Cause

Action / Observations

The control switch, located

on the passenger's end of

the dashboard, is set to the

OFF position.

Before installing a rearward facing child seat on the front

seat, it is essential to deactivate the passenger's front

airbag.

ﬁxed, in the seat

belt and front

passenger's

airbag warning

lamps display.

Passenger's

front airbag

The passenger's front airbag is

deactivated.

On the other hand, where no rearward facing child seat is

present, it is recommended that the airbag be reactivated:

set the control to the ON position.

You can install a "rearward

facing" child seat on the front

seat.

20

After driving for a few minutes, the temperature and pressure in the

cooling system increase.

COOLANT TEMPERATURE INdICATOR

To top up the level:

F

wait for the engine to cool,

unscrew the cap by two turns to allow the pressure to drop,

when the pressure has dropped, remove the cap,

top up the level to the "MAx" mark.

ENGINE OIL LEVEL INdICATOR

With the engine running, when the needle is:

-

in zone A, the temperature is correct,

in zone B, the temperature is too high; the maximum temperature

warning lamp and the central STOP warning lamp come on,

accompanied by an audible signal and the display of an alert

message.

This information is displayed for a few seconds when the ignition is

switched on, at the same time as the service information.

You MUST stop as soon as it is safe to do so.

Wait a few minutes before switching off the engine.

Contact a PEUGEOT dealer or a qualiﬁed workshop.

The check of this level is only valid if the vehicle is on a level

surface, with the engine having been off for more than 30 minutes.

21

Oil level correct

Indicator fault

This is indicated by the ﬂashing of "OIL--" or the appearance of an alert

message in the instrument panel.

Lack of oil

Contact a PEUGEOT dealer or a qualiﬁed workshop.

In the event of a fault with the electric gauge, the oil level is no longer

monitored.

If the system is faulty, you should check the engine oil level using the

dipstick under the bonnet.

Refer to the "Checking levels" section.

This is indicated by the ﬂashing of "OIL" or an alert message in the

instrument panel, accompanied by illumination of the service warning

lamp and an audible signal.

If the lack of oil is conﬁrmed by a check using the dipstick, it is essential

that the level is topped up to prevent damage to the engine.

Refer to the "Checking levels" section.

22

Less than 600 miles (1 000 km) remain before the next service is due

Example: 500 miles (900 km) remain before the next service is due.

SERVICE INdICATOR

This information is displayed for a few seconds when the ignition is

switched on. It informs the driver when the next service is due, in

accordance with the manufacturer's service schedule.

For a few seconds after the ignition is switched on, the central screen

indicates:

The point at which the service is due is calculated from the last indicator

zero reset. It is determined by two parameters:

-

the distance travelled,

the time elapsed since the last service (only on HDi Diesel

versions).

The spanner remains on in the small screen

to indicate that a service must be carried out

soon.

More than 1 800 miles (3 000 km) remain before the next service is due

When the ignition is switched on, no service information appears on the

instrument panel central screen.

Between 600 miles (1 000 km) and 1 800 miles (3 000 km)

remain before the next service is due

For a few seconds after the ignition is switched on, the spanner

symbolising the service operations comes on. The instrument panel central

screen indicates the distance remaining before the next service is due.

Example: 1 700 miles (2 800 km) remain before the next service is due.

For a few seconds after the ignition is switched on, the central screen

indicates:

23

Service overdue

Service indicator reset

For a few seconds after the ignition is switched on, the spanner

ﬂashes to indicate that the service must be carried out as soon as

possible.

Example: the service is overdue by 300 miles (300 km).

For a few seconds after the ignition is switched on, the central screen

indicates:

After each service, the service indicator must be reset.

If you have carried out the service on your vehicle yourself:

F

switch off the ignition,

press and hold the "CHECK/000" button,

The spanner remains on in the small screen

to indicate that a service should have been

carried out.

switch on the ignition; the distance recorder display begins a

countdown,

F

when the instrument panel central screen indicates "=0", release

the button; the spanner disappears from the small screen.

Following this operation, if you wish to disconnect the battery,

lock the vehicle and wait at least ﬁve minutes for the reset to be

registered.

The distance remaining may be weighted by the time factor,

depending on the type of motoring the vehicle is used for.

Therefore, the spanner may also come on if you have exceeded

the period since the last service speciﬁed in the manufacturer's

service schedule.

Retrieving the service information

This indication applies only to HDi Diesel engines.

You can access the service information at any time.

This information appears when running through the manual check

procedure.

F

Brieﬂy press the "CHECK/000" button.

The service information is displayed for a few seconds on the

instrument panel central screen, then disappears.

24

MANUAL CHECK

dISTANCE RECORdERS

This function allows you to check the status of the vehicle (reminder of

the active alert warnings) and the service information.

The total and trip distances are displayed for thirty seconds when the

ignition is switched off, when the driver's door is opened and when the

vehicle is locked or unlocked.

Total distance recorder

Measures the total distance travelled by the vehicle since its ﬁrst

registration.

Trip distance recorder

F

With the engine running, to start a manual check, brieﬂy press the

Measures the distance travelled since it was last reset to zero by the

driver.

"CHECK/000" button on the instrument panel.

If no faults have been detected, "CHECK OK" appears in the

instrument panel central screen.

If a "minor" fault has been detected, the warning lamp concerned then

"CHECK OK" appear in the instrument panel central screen. Contact a

PEUGEOT or a qualiﬁed workshop.

If a "major" fault has been detected, only the warning lamps concerned

appear in the instrument panel central screen. Have it checked by a

PEUGEOT dealer or a qualiﬁed workshop.

F

With the ignition on, press and hold this button until zeros appear.

25

LIGHTING dIMMER

CLOCK

Permits manual adjustment of the brightness of the instruments and

controls to suit the ambient light level. Only operates when the vehicle

lighting is on, with the exception of the daytime running lamps.

The analogue clock, located between the central vents of the

dashboard, does not have an adjustment button.

To set the time, refer to the section relating to your multifunction

screen's conﬁguration menu.

Activation

The clock is synchronised with the multifunction screen time; once the

the setting has been conﬁrmed on the multifunction screen, the hands

will turn to synchronise with the screen, and each time the ignition is

switched on.

F

Press the button to change the brightness of the instruments and

controls.

F

When the lighting reaches the minimum setting, release the button,

then press again to increase it.

or

F

When the lighting reaches the maximum setting, release the button,

then press again to reduce it.

F

When the lighting reaches the level of brightness required, release

the button.

deactivation

When the vehicle lighting is off, or in day mode on vehicles ﬁtted with

daytime running lamps, pressing the button does not have any effect.

26

display of information

TRIP COMPUTER

System that gives you information on the current journey (range, fuel

consumption…).

CENTRAL INSTRUMENT PANEL SCREEN

F

Cycle through the information with successive short presses on this

button.

CENTRAL INSTRUMENT PANEL SCREEN WITH

NAVIGATION

27

The trip computer can display:

Trip reset

-

The current information tab, for the trip in use, with:

● the range,

● the current fuel consumption.

The trip "1" tab with:

● the distance travelled,

● the average fuel consumption,

● the average speed.

1

F

When the trip required is displayed, press this button.

Trips "1" and "2" are independent but their use is identical.

The trip "2" tab with:

For example, trip "1" can be used for daily ﬁgures, and trip "2" for

● the distance travelled,

● the average fuel consumption,

● the average speed.

monthly ﬁgures.

2

F

Pressing the button again takes you to a black screen.

A further press returns you to the normal display.

28

Average fuel consumption

TRIP COMPUTER, A FEW dEFINITIONS

(mpg or l/100 km or km/l)

Calculated since the last trip computer reset.

Range

(miles or km)

The distance which can still be travelled with the fuel

remaining in the tank (related to the average fuel consumption over the

last few miles (kilometres) travelled).

Average speed

(mph or km/h)

This value may vary following a change in the style of driving

or the relief, resulting in a signiﬁcant change in the current fuel

consumption.

Calculated since the last trip computer reset.

When the range falls below 20 miles (30 km), dashes are displayed.

After ﬁlling with at least 5 litres of fuel, the range is recalculated and is

displayed when it exceeds 60 miles (100 km).

distance travelled

(miles or km)

Calculated since the last trip computer reset.

If dashes are displayed continuously while driving in place of the

digits, contact a PEUGEOT dealer or a qualiﬁed workshop.

Current fuel consumption

(mpg or l/100 km or km/l)

Calculated over the last few seconds.

This function is only displayed from 20 mph (30 km/h).

29

CONTROLS

MONOCHROME SCREEN C (WITH

PEUGEOT CONNECT SOUND (RD5))

dISPLAYS IN THE SCREEN

Displays according to context:

From the control panel of your PEUGEOT Connect Sound (RD5), you

can:

-

time,

date,

F

press the "MENU" button for access to the main menu,

press the "5" or "6" buttons to scroll through the items on the

screen,

ambient temperature (the value displayed ﬂashes if there is a risk of

ice),

F

press the "MOdE" button to change the permanent application

-

visual parking assistance,

audio functions,

(audio source, telephone...),

F

or

F

press the "7" or "8" buttons to change a setting value,

press the "OK" button to conﬁrm,

alert messages,

the display and vehicle equipment settings menus.

press the "Back" button to abandon the operation in progress.

30

MAIN MENU

"dIAGNOSIS VEHICLE" MENU

Once this menu has been selected, you can consult information

concerning the status of the vehicle.

F

Press the "MENU" button to gain access to the main menu:

Alert log

-

audio functions,

This summarises the active warning messages, displaying them in

succession on the multifunction screen.

-

vehicle diagnostics,

personalisation-conﬁguration,

telephone (Bluetooth system).

F

Press the "MENU" button to gain access to the main menu.

Press the "5" or "6" buttons to select the menu required, then

conﬁrm by pressing the "OK" button.

Press the arrows, then the "OK" button to select the "diagnosis

vehicle" menu.

"AUdIO FUNCTIONS" MENU

With the PEUGEOT Connect Sound (RD5) switched on, once this menu

has been selected you can activate or deactivate the functions linked

with use of the radio (RDS, REG, RadioText) or the CD (introscan,

shufﬂe, CD repeat).

F

On the "diagnosis vehicle" menu, select the following application:

For more information on the "Audio functions" application, refer to the

"PEUGEOT Connect Sound (RD5)" part of the "Audio equipment and

telematics" section.

31

Example: setting of the duration of the guide-me-home lighting

F

Press the "5" or "6" buttons, then the "OK" button to select the

menu required.

F

Press the "5" or "6" buttons, then the "OK" button to select the

"Guide-me-home headlamps" line.

"PERSONALISATION-CONFIGURATION"

MENU

Once this menu has been selected, you can gain access to the

following functions:

F

Press the "7" or "8" buttons to set the value required (15, 30 or

60 seconds), then press the "OK" button to conﬁrm.

-

deﬁne the vehicle parameters,

display conﬁguration,

choice of language.

define the vehicle parameters*

Once this menu has been selected, you can activate or deactivate the

following equipment:

F

Press the "5" or "6" buttons, then the "OK" button to select the

"OK" box and conﬁrm or press the "Back" button to cancel.

-

selective unlocking (refer to the "Access" section),

guide-me-home lighting (refer to the "Visibility" section),

interior mood lighting (refer to the "Ease of use and comfort" section),

daytime running lamps** (refer to the "Visibility" section),

rear parking sensors (refer to the "Driving" section).

* Depending on version.

** Depending on country of sale.

32

display configuration

"TELEPHONE" MENU

Once this menu has been selected, you have access to the following

settings:

With the PEUGEOT Connect Sound (RD5) switched on, once this menu

has been selected you can conﬁgure your Bluetooth hands-free system

(pairing), consult the various telephone directories (calls log, services...)

and manage your communications (pick up, hang up, call waiting,

secret mode...).

-

brightness-video setting,

date and time setting,

choice of units.

For more information on the "Telephone" application, refer to the

"PEUGEOT Connect Sound (RD5)" part of the "Audio equipment and

telematics" section.

Setting the date and time

F

Press the "7" or "8" button to display the "Display conﬁguration"

menu, then the "OK" button.

Press the "5" or "6" button to select the "Adjust date and time"

line, then the "OK" button.

Press the "7" or "8" button to select the setting to modify. Conﬁrm

by pressing the "OK" button then modify the setting and conﬁrm

again to save the modiﬁcation.

As a safety measure, conﬁguration of the multifunction screen by

the driver must only be done when stationary.

F

Adjust the settings one by one, conﬁrming with the "OK" button.

Press the "5" or "6" button, then the "OK" button to select the

"OK" box and conﬁrm, or the "Back" button to cancel.

Choice of language

Once this menu has been selected, you can change the language

used by the display (Deutsch, English, Espanol, Français, Italiano,

Nederlands, Portugues, Portugues-Brasil, Türkçe**).

** According to country of sale.

33

CONTROLS

RETRACTABLE COLOUR SCREEN (WITH

PEUGEOT CONNECT NAVIGATION (RT6))

From the PEUGEOT Connect Navigation (RT6) control panel, to select

one of the applications:

F

press the dedicated "RAdIO", "MUSIC", "NAV", "TRAFFIC",

"PHONE" or "SETUP" button for access to the corresponding

menu,

dISPLAYS IN THE SCREEN

Displays according to context:

-

time,

F

turn dial A to select a function, an item in a list,

date,

press button B to conﬁrm the selection,

altitude,

or

ambient temperature (the value displayed ﬂashes if there is a risk of

F

press the "Back" button to abandon the current operation and

return to the previous display.

ice),

-

visual parking sensor information,

audio functions,

For more information on these applications, refer to the "PEUGEOT

Connect Navigation (RT6)" part in the "Audio equipment and telematics"

section.

telephone and contacts information,

satellite navigation system information,

alert messages,

menus for settings of the screen, navigation system and vehicle

For operation of the retractable screen (opening, closing,

adjustment of the position, etc.), refer to the "Access to the

retractable screen" section.

equipment.

34

F

Select the setting to modify. Conﬁrm by pressing "OK", then adjust

the setting and modify again.

"SETUP" MENU

F

Adjust the settings one by one.

Select "OK" in the screen then conﬁrm to save the setting.

Voice synthesis

This men allows you to adjust the volume for navigation instructions and

to choose the type of voice (male or female).

Choice of language

F

Press the "SETUP" button to gain access to the conﬁguration menu:

This menu allows you to choose the language used by the screen

(French, English, Italian, Portuguese, Spanish, German, Dutch, Turkish,

Polish, Russian).

-

"Display conﬁguration",

"Voice synthesis",

"Choice of language",

"Vehicle parameters",

"Alert log".

-

Vehicle parameters*

This menu allows you to activate or deactivate certain driving and

comfort equipment, arranged by category:

-

Access to the vehicle

As a safety measure, conﬁguration of the multifunction screen by

the driver must only be done when stationary.

● Plip action (selective unlocking of the driver's door; refer to the

"Access" section),

-

Parking sensors

-

Lighting conﬁguration (see the "Visibility" section) :

● Duration of the guide-me-home lighting,

● Directional headlamps (main/additional directional lighting),

● Mood lighting (Interior mood lighting),

display configuration

This menu allows you to choose a colour scheme for the screen, to

adjust the brightness, set the date and time and choose the units for

distance (km or miles), fuel consumption (l/100 km, mpg or km/l) and

temperature (°Centigrade or °Fahrenheit).

● Daytime running lamps**.

Setting the date and time

Alert log

F

Press "SETUP".

It lists the active alerts by displaying their associated messages in turn.

Select "Display conﬁguration" and conﬁrm.

Select "Set date and time" and conﬁrm.

You can select "Synchronise the minutes with GPS", so that the

minutes are adjusted automatically by satellite reception.

* Depending on version.

** According to country of sale.

35

Adjusting the angle of the screen

ACCESS TO THE RETRACTABLE SCREEN

The screen opens automatically when the ignition is switched on. It

closes automatically three seconds after switching off the ignition if the

audio and telematics system is switched off.

You can adjust the angle of the screen to one of four deﬁned positions,

by repeated presses on the front or back of the control B. The position

of the screen is memorised on closing.

You can open or close the screen at any time, with the ignition on, using

control A.

-

Press button A: the screen folds.

Press button A again: the screen opens again.

If you have closed the screen, it will open again automatically:

-

on switching on the audio and navigation system (unless it

had been closed manually while the system was in operation),

-

when an outgoing telephone call is made,

when a voice command is given,

when a warning message linked with the STOP warning lamp

is displayed (PEUGEOT Connect Navigation (RT6)).

36

Download App

MONITORING for Your Peugeot Rcz 2 Door First Generation (2009-2015)

Related Topics