Get MONITORING -> Indicators Guide for Peugeot Rcz 2 Door First Generation (2009-2015)

After driving for a few minutes, the temperature and pressure in the

cooling system increase.

COOLANT TEMPERATURE INdICATOR

To top up the level:

F

wait for the engine to cool,

unscrew the cap by two turns to allow the pressure to drop,

when the pressure has dropped, remove the cap,

top up the level to the "MAx" mark.

ENGINE OIL LEVEL INdICATOR

With the engine running, when the needle is:

-

in zone A, the temperature is correct,

in zone B, the temperature is too high; the maximum temperature

warning lamp and the central STOP warning lamp come on,

accompanied by an audible signal and the display of an alert

message.

This information is displayed for a few seconds when the ignition is

switched on, at the same time as the service information.

You MUST stop as soon as it is safe to do so.

Wait a few minutes before switching off the engine.

Contact a PEUGEOT dealer or a qualiﬁed workshop.

The check of this level is only valid if the vehicle is on a level

surface, with the engine having been off for more than 30 minutes.

21

Oil level correct

Indicator fault

This is indicated by the ﬂashing of "OIL--" or the appearance of an alert

message in the instrument panel.

Lack of oil

Contact a PEUGEOT dealer or a qualiﬁed workshop.

In the event of a fault with the electric gauge, the oil level is no longer

monitored.

If the system is faulty, you should check the engine oil level using the

dipstick under the bonnet.

Refer to the "Checking levels" section.

This is indicated by the ﬂashing of "OIL" or an alert message in the

instrument panel, accompanied by illumination of the service warning

lamp and an audible signal.

If the lack of oil is conﬁrmed by a check using the dipstick, it is essential

that the level is topped up to prevent damage to the engine.

Refer to the "Checking levels" section.

22

Less than 600 miles (1 000 km) remain before the next service is due

Example: 500 miles (900 km) remain before the next service is due.

SERVICE INdICATOR

This information is displayed for a few seconds when the ignition is

switched on. It informs the driver when the next service is due, in

accordance with the manufacturer's service schedule.

For a few seconds after the ignition is switched on, the central screen

indicates:

The point at which the service is due is calculated from the last indicator

zero reset. It is determined by two parameters:

-

the distance travelled,

the time elapsed since the last service (only on HDi Diesel

versions).

The spanner remains on in the small screen

to indicate that a service must be carried out

soon.

More than 1 800 miles (3 000 km) remain before the next service is due

When the ignition is switched on, no service information appears on the

instrument panel central screen.

Between 600 miles (1 000 km) and 1 800 miles (3 000 km)

remain before the next service is due

For a few seconds after the ignition is switched on, the spanner

symbolising the service operations comes on. The instrument panel central

screen indicates the distance remaining before the next service is due.

Example: 1 700 miles (2 800 km) remain before the next service is due.

For a few seconds after the ignition is switched on, the central screen

indicates:

23

Service overdue

Service indicator reset

For a few seconds after the ignition is switched on, the spanner

ﬂashes to indicate that the service must be carried out as soon as

possible.

Example: the service is overdue by 300 miles (300 km).

For a few seconds after the ignition is switched on, the central screen

indicates:

After each service, the service indicator must be reset.

If you have carried out the service on your vehicle yourself:

F

switch off the ignition,

press and hold the "CHECK/000" button,

The spanner remains on in the small screen

to indicate that a service should have been

carried out.

switch on the ignition; the distance recorder display begins a

countdown,

F

when the instrument panel central screen indicates "=0", release

the button; the spanner disappears from the small screen.

Following this operation, if you wish to disconnect the battery,

lock the vehicle and wait at least ﬁve minutes for the reset to be

registered.

The distance remaining may be weighted by the time factor,

depending on the type of motoring the vehicle is used for.

Therefore, the spanner may also come on if you have exceeded

the period since the last service speciﬁed in the manufacturer's

service schedule.

Retrieving the service information

This indication applies only to HDi Diesel engines.

You can access the service information at any time.

This information appears when running through the manual check

procedure.

F

Brieﬂy press the "CHECK/000" button.

The service information is displayed for a few seconds on the

instrument panel central screen, then disappears.

24

Download App

MONITORING -> Indicators for Your Peugeot Rcz 2 Door First Generation (2009-2015)

Related Topics

MONITORING