Access
Deactivation
F Press the unlocking button on the remote
Deactivating the interior
Triggering of the alarm
volumetric and anti-tilt monitoring
This is indicated by sounding of the siren
and flashing of the direction indicators for
30 seconds.
Depending on the country of sale, certain
monitoring functions remain active until
the alarm has been triggered eleven times
consecutively.
control.
F Switch off the ignition and within 10 seconds
press the alarm button until its red indicator
lamp is on fixed.
or
F Unlock the vehicle with the "Keyless Entry
and Starting" system.
The monitoring system is deactivated: the
indicator lamp in the button goes off and the
direction indicators flash for about 2 seconds.
F Get out of the vehicle.
F Immediately lock the vehicle using the
remote control or the "Keyless Entry and
Starting" system.
When the vehicle is unlocked using the remote
control or the "Keyless Entry and Starting"
system, rapid flashing of the red indicator
lamp in the button informs you that the alarm
was triggered during your absence. When
the ignition is switched on, the flashing stops
immediately.
Only the exterior perimeter monitoring is
activated; the red indicator lamp in the button
flashes every second.
When the vehicle automatically locks
itself again (as happens if a door or the
boot is not opened within 30 seconds of
unlocking), the monitoring system is also
reactivated automatically.
To be taken into account, the deactivation
must be carried out after every time the
ignition is switched off.
Failure of the remote control
Reactivating the interior
volumetric and anti-tilt monitoring
To deactivate the monitoring functions:
F unlock the vehicle using the key (integral to
the remote control) in the driver's door lock,
F open the door; the alarm is triggered,
F switch on the ignition; the alarm stops; the
indicator lamp in the button goes off.
Locking the vehicle
with exterior perimeter
monitoring only
Deactivate the interior volumetric and anti-tilt
monitoring to avoid unwanted triggering of the
alarm in certain cases such as:
F Deactivate the perimeter monitoring by
unlocking the vehicle with the remote
control or the "Keyless Entry and Starting"
system.
The indicator lamp in the button goes off.
F Reactivate all monitoring by locking the
vehicle with the remote control or the
"Keyless Entry and Starting" system.
The red indicator lamp in the button once again
flashes every second.
-
-
-
-
-
-
leaving a pet in the vehicle,
leaving a window or sunroof partially open,
washing your vehicle,
changing a wheel,
having your vehicle towed,
transport by ship.
Locking the vehicle without
activating the alarm
F Lock or deadlock the vehicle using the key
(integral to the remote control) in the driver's
door lock.
50
English 
