Ease of use and comfort -> Additional heating/ventilation for Your Peugeot Rifter 4 Door First Generation (2018-2023)

Ease of use and comfort  
Programming  
With Bluetooth® audio system  
Additional heating/  
ventilation  
Using these two clocks and depending on  
the season you can, for example, select  
one or the other start time.  
A message in the screen confirms your  
choice.  
F
Press the MENU button to  
access the main menu.  
With PEUGEOT Connect Radio  
Press Connect-App or Applications  
to display the primary page.  
F Select "Pre-heat./Pre-ventil.".  
Then press "Programmable  
heating/ventilation".  
Heating  
F Select "Activation" and, if necessary for  
programming, select "Parameters".  
This is an additional and separate system  
which heats the passenger compartment and  
improves defrosting performance.  
F Select "Heating" to heat the engine and  
passenger compartment or "Ventilation" to  
ventilate the passenger compartment.  
23 °C  
12:13  
This indicator lamp is illuminated  
when the system is programmed.  
This indicator lamp flashes while  
the heating is in operation or when  
switched on remotely via the remote  
control.  
This indicator lamp goes off at the  
end of the heating cycle or when the  
heating is stopped using the remote  
control.  
F Select:  
-
the 1st clock to programme/memorise  
the time at which the pre-heating  
temperature will be reached,  
F Select the "Status" tab to activate/  
deactivate the system.  
-
the 2nd clock to programme/memorise  
a second time at which the pre-heating  
temperature will be reached,  
Ventilation  
This system allows ventilation of the passenger  
compartment with exterior air to improve the  
temperature experienced on entering the  
vehicle in summer.  
76