Ease of use and comfort -> Adjusting the height of the head restraint for Your Peugeot Rifter 4 Door First Generation (2018-2023)

Ease of use and comfort  
Refitting the seat  
F Pull on the strap 3 to open the seat  
anchorages.  
F While still holding the strap 3, place the  
anchorages in the anchorage points on the  
floor.  
F Lift the bar 2, located behind the seat,  
to release the feet of the seat from their  
anchorage in the floor.  
F Tilt the entire seat forwards.  
F Hook the strap 3 on the row 2 head restraint  
rod.  
F To remove it, press the lug A and pull it  
upwards.  
F To put it back in place, engage the head  
restraint rods in the openings keeping them  
in line with the seat backrest.  
F To lower it, press the lug A and push down  
on the head restraint at the same time.  
F Release the strap 3.  
Repositioning the seat  
F Ensure that no object or feet are obstructing  
the rear anchorage points 4 and that the seat  
belt is correctly positioned and available.  
F Fold the seat backwards to fix its rear  
anchorage feet.  
F Use the control 1 to lift the backrest into the  
initial position.  
F Refit the head restraint.  
F Fold the entire seat backwards.  
F Check that the seat belt is not trapped  
during the manoeuvre.  
The head restraint has a frame with  
notches which prevents it from lowering;  
this is a safety device in case of impact.  
The adjustment is correct when the  
upper edge of the head restraint is  
level with the top of the head.  
Never drive with the head restraints  
removed; they must be fitted and correctly  
adjusted.  
Removing the seat  
F Lower the head restraint as far as it will go.  
F Place the seat in the fully folded position.  
Adjusting the height of the  
head restraint  
Never drive with passengers seated at  
the rear when the head restraints are  
removed or not in the high position; the  
head restraints must be in place and in the  
high position.  
For more information on the Seat belts,  
refer to the corresponding section.  
F Pull on the strap 3 to open the seat  
anchorages.  
F Still holding the strap 3, lift the seat.  
F To raise it, pull it upwards as far as possible  
(notch).  
62