Safety
-
run the strap of the child seat behind the top
of the seat backrest, centring it between the
holes for the head restraint rods,
fix the hook of the upper strap to rear ring B,
tighten the upper strap.
"RÖMER Baby-Safe Plus and its ISOFIX
RÖMER Duo Plus ISOFIX
base"
(size category: E)
(size category: B1)
-
-
Group 1: from 9 to 18kg
Group 0+: from birth to 13 kg
The incorrect installation of a child seat in
a vehicle compromises the protection of
the child in the event of an accident.
Strictly follow the fitting instructions
provided in the installation guide supplied
with the child seat.
Is installed "rearward facing" using an ISOFIX
base which is attached to rings A.
Is installed only in the "forward facing"
position.
Is attached to the rings A and the upper ring
B, referred to as the TOP TETHER, using an
upper strap.
Recommended ISOFIX
child seats
5
The base has a support leg, height
adjustable, which rests on the vehicle's floor.
This child seat can also be secured with
a seat belt. In this case, only the seat body is
used and is attached to the vehicle seat using
the three-point seat belt.
3 seat body angles: sitting, reclining and lying
down.
Also consult the user guide from the child
seat's manufacturer to find out how to
install and remove the seat.
This child seat can also be used on seats
not equipped with ISOFIX mountings. In this
case, it must be secured to the vehicle's seat
using the three-point seat belt. Adjust the
position of the vehicle's front seat so that the
child's feet are not touching the backrest.
115
English