Get Audio and Telematics (Nav) -> Connectivity / Radio Media / Phone Guide for Peugeot Traveller Van First Generation (2016-2026)

Audio and Telematics

Connectivity

Functionalities available according to equipment.

Level 1

Level 2

Level 3

Bluetooth connection

2

3

23 °C

531 kHz

12:13

Wi-Fi network connection

Networks

1

4

5

6

Connections and subscriptions to services

Share Wi-Fi connection

7

8

368

Audio and Telematics

Functionalities available according to equipment.

Level 2

Level 3

Comments

Display all telephones, connected or

disconnected.

All

2

Connectivity

Secondary page

1

Connected

Display all connected telephones.

Start a search for a device to connect.

Display secured Wi-Fi networks.

3

Bluetooth

connection

Search

Secured

4

Connectivity

Secondary page

1

Not secured

Display non-secured Wi-Fi networks.

Display remembered Wi-Fi networks.

5

Wi-Fi network

connection

Stored

6

Connectivity

Display the state of the subscription to connected

services, the state of the network connection and

the connection mode.

Secondary page

1

Manage connection

Activate or deactivating the sharing of the Wi-Fi

connection.

Activation

7

Connectivity

Secondary page

Select a Wi-Fi network found by the system and

connect to it.

1

Settings

8

Share Wi-Fi

connection

Save settings.

.

369

Audio and Telematics

Bluetooth connection^®

Procedure from the system

Connection sharing

As a safety measure and because it

requires sustained attention by the

driver, the pairing of a Bluetooth mobile

telephone with the Bluetooth hands-

free system of your audio system must

be done with the vehicle stationary

and the ignition on.

Press on "Telephone" to display the

secondary page.

The system offers to connect the

telephone with 3 profiles:

-

"Telephone" (hands-free kit, telephone

only),

"Streaming" (wireless play of audio files

on the telephone),

Press on the "OPTIONS" button to

go to the secondary page.

1

"Mobile internet data".

Press on "Bluetooth connection".

The "Mobile internet data" profile

must be activated for connected

navigation (where the vehicle does not

have "emergency and assistance call"

services), having first activated sharing

of this connection on your smartphone.

Activate the Bluetooth function on the

telephone and ensure that it is "visible

to all" (telephone configuration).

Select "Search".

The list of detected telephones is

displayed.

Procedure from the telephone

If the pairing procedure fails, it is recommended

that you deactivate and then reactivate the

"Bluetooth" function in your telephone.

Select the name of the system in the

list of devices detected.

Select one or more profiles.

In the system, accept the connection request

from the telephone.

Select the name of the chosen

telephone in the list.

Press on "Confirm".

To complete the pairing, whichever

procedure used (from the telephone or

from the system), ensure that the code

is the same in the system and in the

telephone.

Depending on the type of telephone,

you may be asked to accept or not the

transfer of your contacts and messages.

370

Audio and Telematics

Wi-Fi connection

Sharing the Wi-Fi connection Managing connections

Network connection by the smartphone Wi-Fi.

Creation of a local Wi-Fi network by the

Press Connectivity to display the

system.

primary page.

Press "Connectivity" to display the

Press Connectivity to display the

primary page.

Press the "OPTIONS" button to go to

the secondary page.

1

Press the "OPTIONS" button to go to

the secondary page.

Select "Manage connection".

1

Select "Wi-Fi network connection".

Select "Share Wi-Fi connection".

With this function you can view the access

to connected services, the availability of

connected services and modify the connection

mode.

Select the "Secured", "Not secured"

or "Stored" tab.

Select the "Activation" tab to

activate or deactivate sharing of the

Wi-Fi connection.

7

And / or

Select a network.

Select the "Settings" to change the

name of the system network and the

password.

8

using the virtual keypad, enter the

"Key" for the Wi-Fi network and the

"Password".

Press "Confirm".

Press "Confirm" to start the

connection.

To protect from any piracy and provide

maximum security for your systems,

it is recommended that you use a

security code or complex password.

The Wi-Fi connection and the sharing

of the Wi-Fi connection are exclusive.

.

371

Audio and Telematics

MirrorLink^TMsmartphone connection

23 °C

531 kHz

12:13

372

Audio and Telematics

once connection is established, a page

As a safety measure and because it

requires the sustained attention of

the driver, using a smartphone when

driving is prohibited.

As a safety measure, applications

can only be viewed with the vehicle

stationary; display is interrupted once

the vehicle is moving.

is displayed with the applications already

downloaded to your smartphone and adapted

to MirrorLink^TMtechnology.

operation must be with the vehicle

stationary.

Access to the different audio sources remains

accessible in the margin of the MirrorLink^TM

display, using touch buttons in the upper bar.

Access to the menus for the system is possible

at any time using the dedicated buttons

The "MirrorLink^TM" function requires

the use of a compatible smartphone

and applications.

When connecting a smartphone to

the system, it is recommended that

Bluetooth^®be started on the smartphone

The synchronisation of a

smartphone allows applications on a

smartphone that are adapted to the

MirrorLink^TMtechnology to be displayed

in the vehicle's screen.

There may be a wait for the availability

of applications, depending on the

quality of your network.

Connect a uSB cable. The

smartphone charges when

connected by a uSB cable.

The principles and standards

are constantly evolving. For the

communication process between

the smartphone and the system to

work correctly, the smartphone must

be unlocked; update the operating

system of your smartphone as

well as the date and time in the

smartphone and the system.

For the list of eligible smartphones,

connect to the brand's internet website

in your country.

From the system, press on

"Connectivity" to display the primary

page.

Press "MirrorLink^TM" to start the

application in the system.

Depending on the smartphone, it may be

necessary to activate the "MirrorLink^TM" function.

During the procedure, several screen

pages relating to certain functions

are displayed.

Accept to start and end the

connection.

.

373

Audio and Telematics

Level 1

Level 2

Level 3

23 °C

531 kHz

12:13

374

Audio and Telematics

Level 1

Level 2

Level 3

Comments

go to or return to the applications already

downloaded to your smartphone and adapted to

MirrorLink^TMtechnology.

go to a menu list depending on the application

chosen.

"Back": abandon the current operation, go up

one level.

"Home": go to or return to the "Car mode" page

on your smartphone.

Connectivity

MirrorLink^TM

go to the primary page of the "Connectivity"

menu.

.

375

Audio and Telematics

CarPlay^®smartphone connection

23 °C

531 kHz

12:13

376

Audio and Telematics

Connect a uSB cable. The

smartphone charges when

connected by a uSB cable.

As a safety measure and because it

requires the sustained attention of

the driver, using a smartphone when

driving is prohibited.

operation must be with the vehicle

stationary.

on connecting the uSB cable, the

CarPlay^®function deactivates the

system's Bluetooth^®mode.

Press "Telephone" to display the

CarPlay ^®interface.

The synchronisation of a

or

smartphone allows applications on a

smartphone that are adapted to the

CarPlay^®technology to be displayed

in the vehicle's screen, having first

activated the CarPlay^®function in your

smartphone.

Connect a uSB cable. The

smartphone charges when

connected by a uSB cable.

As the principles and standards

are constantly changing, it is

recommended that you keep your

smartphone's operating system

updated.

For the list of eligible smartphones, go

to the brand's internet website in your

country.

In the system, press "Connectivity"

to display the primary page.

Press "CarPlay" to display the

CarPlay^®interface.

.

377

Audio and Telematics

Radio Media

Level 1

Level 2

23 °C

87.5 MHz

12:13

FM/87.5 MHz

87.5MHz

23 °C

87.5 MHz

12:13

FM/87.5 MHz

87.5MHz

23 °C

531 kHz

12:13

AM/531 kHz

PO

kHz

1

2

3

4

1

2

3

4

Radio stations

378

Audio and Telematics

Level 1

Level 2

Comments

Radio

USB

Radio Media

Source

iPod

Select change of source.

AUX

Bluetooth

Frequency

Presets

FM

Carry out an automatic or manual search for

radio stations.

Radio Media

Frequency /

Presets

Make a long press on an empty location to preset

a station.

2

Radio Media

Band

DAB

Press Band to change waveband.

3

4

AM

Radio Media

List

open the list of radio stations and press on a

radio station to select it.

Radio stations

.

379

Audio and Telematics

Level 1

Level 2

Audio settings

1

5

6

7

8

9

Radio-media options

Radio settings

5

6

7

8

9

Audio settings

10

11

Radio stations

5

6

7

8

9

12

13

14

15

380

Audio and Telematics

Level 1

Level 2

Comments

Ambience

Distribution

Sound

Select the sound ambience.

5

6

7

8

9

Sound distribution by the Arkamys^®system.

Radio Media

Secondary page

Audio settings

Adjust the volume or activate volume linked to

speed.

1

Voice

Adjust the voice volume.

Adjust the ringtone volume.

Save settings.

Ringtone

Confirm

General

Announcements

Confirm

FM

10

11

Radio Media

Secondary page

Radio settings

Activate or deactivate settings.

Save settings.

12

13

14

15

Display the list of radio stations for the band

selected.

DAB

Radio Media

Secondary page

Radio stations

AM

Presets

Frequency

Select a preset radio station.

1

enter a frequency manually.

Change the screen display mode.

update the list according to reception.

.

381

Audio and Telematics

Level 1

Level 2

1

Radio-media options

USB

16 17 18 19 20

Photos

21

382

Audio and Telematics

Level 1

Level 2

Comments

Albums

Artists

16

17

Radio Media

Secondary page

Music files

Genres

Playlists

Folders

Choose a selection mode.

1

18

19

20

Radio Media

Secondary page

Managing photos

Display photos.

The system supports the following image

formats: .gif, .jpg, .jpeg, .bmp, .png, .raw and .tiff

with a maximum file size of 10 Mb per image.

USB

21

.

383

Audio and Telematics

Radio

Selecting a station

Preset a station

Press Radio Media to display the

menu.

Press "Frequency".

Select a radio station or frequency (refer to the

corresponding section).

2

Press "Presets".

Press "Frequency".

enter the values using the virtual

keypad.

First enter the units then click on the

decimals zone to enter the figures

after the decimal point.

2

Make a long press on one of the

buttons to preset the station.

Press one of the buttons for an

automatic search for radio stations.

Press "Confirm".

or

Move the cursor for a manual search

for frequencies up or down.

Radio reception may be affected by

the use of electrical equipment not

approved by the brand, such as a uSB

charger connected to the 12 V socket.

The exterior environment (hills,

buildings, tunnel, car park, below

ground...) may prevent reception,

even in RDS station tracking mode.

This phenomenon is normal in the

propagation of radio waves and is in no

way indicative of a fault with the audio

system.

Press Radio Media to display the

primary page.

Press the "OPTIONS" button to go to

the secondary page.

1

Select "Radio stations" in the

secondary page.

384

Audio and Telematics

Activate/ Deactivate RDS

Display text information

Play TA messages

Press Radio Media to display the

primary page.

The "radiotext" function allows

information transmitted by the radio

station and related to the station or the

song playing to be displayed.

The TA (Traffic Announcement)

function gives priority to TA alert

messages. To operate, this function

needs good reception of a radio station

that carries this type of message. While

traffic information is being broadcast,

the current media is automatically

interrupted so that the TA message can

be heard. Normal play of the media

previously playing is resumed at the

end of the message.

Press the "OPTIONS" button to go to

the secondary page.

1

Select "Radio settings".

Press Radio Media to display the

primary page.

Select "General".

10

Press the "OPTIONS" button to go to

the secondary page.

1

Activate/deactivate "Station follow".

Select "Radio settings".

Press "Confirm".

Select "General".

Select "Announcements".

10

11

RDS, if activated, allows you to continue

listening to the same station by automatic

retuning to alternative frequencies. However,

in certain conditions, coverage of an RDS

station may not be assured throughout the

entire country as radio stations do not cover

100 % of the territory. This explains the loss

of reception of the station during a journey.

Activate / Deactivate "Display radio

text".

Activate / Deactivate "Traffic

announcement".

Press "Confirm".

.

385

Audio and Telematics

DAB radio (Digital Audio Broadcasting)

Terrestrial Digital Radio

Display of the name of the current station

and "multiplex" being listened to, also

called an "ensemble".

Select audio source.

Previous "Multiplex".

Previous radio station.

Display "Radiotext" for the

current station.

Display of options:

if active but not available,

the display will be greyed

out.

Next "multiplex".

Next radio station.

if active and available, the

display will be clear.

Display of the list of radio

stations.

Secondary page.

Change of band.

Switch between the page with the presets and the page

with the frequencies.

If the current "DAB" station is not available on

"FM" the "DAB/FM" option is greyed out.

386

Audio and Telematics

Digital radio

DAB / FM auto tracking

Digital radio provides higher quality

reception.

The different multiplexes offer a

choice of radio stations arranged in

alphabetical order.

"DAB" does not cover 100% of the

territory.

If "DAB / FM auto tracking" is activated,

there is a difference of a few seconds

when the system switches to "FM"

analogue radio with sometimes a

variation in volume.

once the digital signal is restored,

the system automatically changes back

to "DAB".

When the digital radio signal is poor,

"DAB/FM auto tracking" allows you to

continue listening to the same station,

by automatically switching to the

corresponding "FM" analogue station

(if there is one).

Press Radio Media to display the

primary page.

Press Radio Media to display the

primary page.

If the "DAB" station being listened to

is not available on "FM" ("DAB/FM"

option greyed out), or "DAB/FM auto

tracking" is not activated, the sound

will cut out while the digital signal is too

weak.

Press the "OPTIONS" button to go to

the secondary page.

Select the audio source.

1

Select "Radio settings".

Press "Band" to select the "DAB"

waveband.

3

Select "General".

10

Activate / Deactivate "Station

follow".

Press "Confirm".

.

387

Audio and Telematics

Media

USB player

Auxiliary (AUX) socket

Selecting the source

Press Radio Media to display the

primary page.

Select "Source".

Choose the source.

Bluetooth^®audio streaming

Insert the uSB memory stick into the uSB port

or connect the uSB device to the uSB port

using a suitable cable (not supplied).

This source is only available if "Auxiliary input"

has been checked in the audio settings.

Streaming allows you to listen to music from

your telephone.

The system builds playlists (in temporary

memory), an operation which can take from

a few seconds to several minutes at the first

connection.

Reduce the number of non-music files and the

number of folders to reduce the waiting time.

The playlists are updated every time the

ignition is switched off or connection of a uSB

memory stick. The lists are memorised: if they

are not modified, the subsequent loading time

will be shorter.

Connect the portable device (MP3 player…) to

the auxiliary Jack socket using an audio cable

(not supplied).

The Bluetooth profile must be activated. First

adjust the volume on your portable device (to a

high level).

Then adjust the volume of your audio system.

First adjust the volume of your portable device

(to a high level). Then adjust the volume of your

audio system.

Display and management of the controls are

via the portable device.

If play does not start automatically, it may be

necessary to start the audio playback from the

telephone.

Control is from the portable device or by using

the audio system buttons.

once connected in streaming mode,

the telephone is considered to be a

media source.

388

Audio and Telematics

Connecting Apple^®players

Information and advice

Connect the Apple^®player to the uSB port

using a suitable cable (not supplied).

Play starts automatically.

The audio equipment will only play audio

files with ".wma, .aac, .flac, .ogg and

.mp3" file extensions and with a bit rate of

between 32 Kbps and 320 Kbps.

It also supports VBR (Variable Bit Rate) mode.

No other type of file (.mp4, ...) can be played.

".wma" files must be of the standard wma 9 type.

The sampling rates supported are 32, 44 and

48 KHz.

The system supports uSB mass

storage devices, BlackBerry^®devices

or Apple^®players via uSB ports. The

adaptor cable is not supplied.

Control is via the audio system.

Control of the peripheral device is with

the audio system controls.

other peripherals, not recognised on

connection, must be connected to the

auxiliary socket using a Jack cable (not

supplied) or via Bluetooth streaming,

depending on compatibility.

The classifications available are those

of the portable device connected

(artists / albums / genres / playlists /

audiobooks / podcasts).

The default classification used is by

artist. To modify the classification used,

return to the first level of the menu

then select the desired classification

(playlists for example) and confirm

to go down through the menu to the

desired track.

It is advisable to restrict file names to

20 characters, without using of special

characters (e.g.: " " ? ; ù) to avoid any playing

and displaying problems.

use only uSB memory sticks formatted FAT 32

(file allocation table).

It is recommended that the uSB cable

for the portable device is used.

The version of software in the audio system

may not be compatible with the generation of

your Apple^®player.

.

389

Audio and Telematics

Telephone

Level 1

Level 2

Level 3

23 °C

531 kHz

12:13

Contacts and favourites

1

Known devices

4

5

6

7

12

13

14

23 °C

531 kHz

12:13

Recent calls

1

2

3

8

9

10

11

390

Audio and Telematics

Level 1

Level 2

Level 3

Comments

All

4

5

6

7

View contacts according to presentation choices.

Select a contact or a favourite saved in the

system via the profile selected to start the call.

Telephone

Address

Favourites

Sort the contacts by Surname-First name or First

name-Surname.

Telephone

Bluetooth

Contact

update the contacts from the telephone.

2

Search

Create

Confirm

Search for a contact in the directory.

Telephone

Address

email

12

13

14

Create a new contact in the system.

Confirm

All

8

9

Telephone

Bluetooth

Calls

Incoming

Outgoing

Missed

View calls according to choice of presentation.

Select a contact to start the call.

10

11

3

View details for the contact.

.

391

Audio and Telematics

Level 1

Level 2

Bluetooth connection

1

15

16

Settings - Bluetooth

Messages

17

18

19

Email

20

21

22

392

Audio and Telematics

Level 1

Level 2

Comments

Display all telephones, connected or

disconnected, recognised by the system.

All

15

16

Telephone

Secondary page

1

Connected

Search

All

Display all connected telephones.

Bluetooth

connection

Start the search for a device to connect.

17

18

19

20

Telephone

Secondary page

Messages

Received

Sent

Display messages according to the choice made.

Received

Sent

Telephone

Secondary page

Email

21

22

Display emails according to the choice made.

1

Not read

Mailbox

.

393

Audio and Telematics

Level 1

Level 2

Options

1

Settings - Bluetooth

Options

23 24 25 26

Quick messages

27

28

29

30

394

Audio and Telematics

Level 1

Level 2

Comments

Make driving safe.

Security

Voicemail

Ringtone

Statistics

Confirm

Delayed

My arrival

Not available

Other

23

24

25

enter and save the number for the telephone

voicemail.

Telephone

Secondary page

Options

Adjust the ringtone volume.

Display data for the telephone connected.

Save the options.

1

26

27

28

Telephone

Select a quick message from the categories, as

required.

Secondary page

Quick messages

1

29

30

Create

Create a quick message.

.

395

Audio and Telematics

Pairing a Bluetooth^®telephone

Procedure from the system

Connection sharing

As a safety measure and because it

requires sustained attention by the

driver, the pairing of a Bluetooth mobile

telephone with theBluetooth hands-free

system of your audio system must be

done with the vehicle stationary and

the ignition on.

Press Telephone to display the

primary page.

The system offers to connect the telephone

with 3 profiles:

-

Telephone (hands-free kit, telephone

only),

Streaming (wireless play of audio files on

the telephone),

Press Connect telephone.

Mobile internet data.

or.

The "Mobile internet data" profile

must be activated for connected

navigation, having first activated

sharing of this connection on your

smartphone.

Select "Search".

The list of telephones detected is

displayed.

Activate the Bluetooth function on the

telephone and ensure that it is "visible

to all" (telephone configuration).

If the pairing procedure fails, it is recommended

that you deactivate and then reactivate the

"Bluetooth" function in your telephone.

Select one or more profiles.

Procedure from the telephone

Select the system name in the list of

devices detected.

Press "Confirm".

Select the name of the chosen

telephone in the list.

In the system, accept the connection request

from the telephone.

To complete the pairing, whichever

procedure used (from the telephone or

from the system), ensure that the code

is the same in the system and in the

telephone.

Depending on the type of telephone,

you may be asked to accept or not

the transfer of your contacts and

messages.

396

Audio and Telematics

Automatic reconnection

To modify the connection profile:

The ability of the system to connect with

just one profile depends on the telephone.

All three profiles may connect by default.

on return to the vehicle, if the last

telephone connected is present again,

it is automatically recognised and

within about 30 seconds of switching

on the ignition, the connection is

established without any action on your

part (Bluetooth activated).

Press Telephone to display the

primary page.

Press the "OPTIONS" button to go to

the secondary page.

1

The services available depend on

the network, the SIM card and the

compatibility of the Bluetooth devices

used. Check in your telephone's

manual and with your service provider

for the services available to you.

Select "Bluetooth connection" to

display the list of paired devices.

Press the "details" button.

Select one or more profiles.

The profiles compatible with the system

are HFP, oPP, PBAP, A2DP, AVRCP,

MAP and PAN.

Press on "Confirm".

go to the brand's website for more information

(compatibility, additional help, ...).

.

397

Audio and Telematics

Managing paired telephones

Deleting a telephone

Receiving a call

Select the basket at top right of the

screen to display a basket alongside

the telephone chosen.

An incoming call is announced by a ring and a

superimposed display in the screen.

This function allows the connection or

disconnection of a peripheral device as

well as the deletion of a pairing.

Make a short press on the steering

mounted TEL button to accept an

incoming call.

Press the basket alongside the

telephone chosen to delete it.

Press Telephone to display the

primary page.

And

Press the "OPTIONS" button to go to

the secondary page.

Make a long press

1

on the steering mounted TEL button

to reject the call.

Select "Bluetooth connection" to

display the list of paired peripheral

devices.

or

Press on the name of the telephone

chosen in the list to disconnect it.

Press again to connect it.

Select "End call".

398

Audio and Telematics

Making a call

Calling a contact

Calling a recently used number

Press Telephone to display the

primary page.

using the telephone is not

recommended while driving.

Park the vehicle.

Make the call using the steering

mounted controls.

Press Telephone to display the

primary page.

or make a long press

or

Make a long press

on the steering mounted TEL button.

Select "Contact".

on the steering mounted button.

Calling a new number

Press Telephone to display the

primary page.

2

Select "Calls".

Select the desired contact from the list offered.

enter the phone number using the

digital keypad.

3

Select "Call".

Select the desired contact from the list offered.

Press "Call" to start the call.

It is always possible to make a call

directly from the telephone; as a safety

measure, first park the vehicle.

.

399

Audio and Telematics

Managing contacts / entries

Managing messages

Press Telephone to display the

primary page.

Press Telephone to display the

primary page.

The access to "Messages" depends on

the compatibility of the smartphone and

the integral system.

Depending on the smartphone, access

to your messages or email may be

slow.

Select "Contact".

Press the "OPTIONS" button to go to

the secondary page.

2

1

Select "Create" to add a new contact.

Select "Messages" to display the list

of messages.

The services available depend on

the network, the SIM card and the

compatibility of the Bluetooth devices

used.

Check in the manual for your telephone

and with your service provider for the

services available to you.

Select the "All" or "Received" or

"Sent" tab.

In the "Telephone" tab, enter the

telephone numbers for the contact.

12

Select the detail of the message

chosen in one of the lists

In the "Address" tab, enter the

addresses for the contact.

13

Press "Answer" to send a quick

message stored in the system.

In the "Email" tab, enter the email

addresses for the contact.

14

Press "Call" to start the call.

The "Email" function allows email

addresses to be entered for a contact,

but the system is not able to send

emails.

Press "Play" to hear the message.

400

Audio and Telematics

Managing quick messages

Managing email

Press Telephone to display the

primary page.

Press this button to "Modify" the new

quick message(s) created.

Press Telephone to display the

primary page.

Press on the "OPTIONS" button to

Press the "OPTIONS" button to go to

The "Modify" function does not apply

to quick messages already present in

the system.

go to the secondary page.

the secondary page.

1

Select "Messages" to display the list

Select "Email" to display the list of

of messages.

messages.

Select the "Delayed" or "My arrival"

or "Not available" or "Other" tab

with the possibility of creating new

messages.

Select the "Received" or "Sent" or

"Not read" tab.

Select the email chosen in the list.

Press "Create" to write a new

Press "Play" to hear the email.

message.

Select the message chosen in one of

the lists.

Access to "Email" depends on the

compatibility of the smartphone and the

integral system.

Press "Transfer" to select the

addressee(s).

Press "Play" to play the message.

.

401

Audio and Telematics

Settings

Level 1

Level 2

Audio settings

3

4

5

6

7

3

4

5

6

7

23 °C

12:13

Audio settings

1

2

3

4

5

6

7

402

Audio and Telematics

Level 1

Level 2

Comments

Ambience

Distribution

Sound

Select the sound ambience.

3

4

Adjust the volume or activate volume linked to

speed.

Settings

5

6

7

Audio settings

Voice

Adjust the voice volume.

Adjust the ringtone volume.

Save the settings.

Ringtone

Confirm

Settings

Function allowing the display to be switched off.

Pressing the screen reactivates it.

Turn off screen

Settings

Activate the profile selected.

Profile (1, 2, 3)

2

.

403

Audio and Telematics

Level 1

Level 2

Level 3

Screen configuration

1

8

9

8

9

Settings and tools

System settings

Information

10

11

12

Languages

13 14 15 16

404

Audio and Telematics

Level 1

Settings

Level 2

Animation

Level 3

Comments

Activate or deactivate settings.

Adjust the level of brightness.

Save the settings.

8

9

Secondary page

1

Brightness

Confirm

Screen

configuration

Distance and fuel

consumption

Set the units used for distance, fuel consumption

and temperature.

Units

10

11

12

Temperature

Reinitialize

Settings

Factory settings

System info

Return to the factory settings.

Secondary page

1

View the versions of the different modules

(system, mapping, risk areas) installed in the

system as well as the updates available.

System

settings

View

Confirm

All

Save the settings.

13

14

15

16

Europe

Asia

Settings

Secondary page

Languages

Select the language then confirm.

1

America

Confirm

Having selected the language, save the setting.

.

405

Audio and Telematics

Level 1

Level 2

Level 3

Setting the time-date

1

17

18

Settings and tools

Setting of the profiles

19 20 21 22

406

Audio and Telematics

Level 1

Level 2

Level 3

Comments

Date

Time

enter the date and select the date format.

17

18

Date format:

Time

Settings

Set the time.

Secondary page

1

Time Zone

Time format:

Define the time zone.

Setting

the time-date

Select the time format: 12h / 24h.

Activate or deactivate synchronisation with gPS.

Save the settings.

Synchronisation with

gPS (uTC):

Confirm

Profile 1

19

20

Settings

Profile 2

enter settings for the profiles.

Secondary page

1

Profile 3

21

22

Setting

of the profiles

Common profile

Confirm

Save the settings.

.

407

Audio and Telematics

Audio settings

Profile settings

Press Settings to display the primary

page.

The sound distribution (or spatialisation

processing that allows the quality of the

sound to be adapted according to the

number of passengers in the vehicle.

Available only with the 6-speaker

configuration.

As a safety measure and because it

requires the sustained attention of the

driver, changes to settings must only be

done with the vehicle stationary.

Select "Audio settings".

Select "Ambience"

"Position"

Press Settings to display the primary

page.

3

4

5

6

7

The audio Ambience settings

(6 ambiences available) as well as the

Bass, Medium and Treble settings

are different and independent for each

sound source.

or

Press the "OPTIONS" button to go to

the secondary page.

1

Select "Setting of the profiles".

Select "Profile 1", "Profile 2",

or

Activate or Deactivate "Loudness".

"Sound"

"Voice"

The settings for "Position" (All

passengers, Driver and Front only) are

common to all sources.

"Profile 3" or "Common profile".

19

Activate or Deactivate "Touch tones",

"Volume linked to speed" and

"Auxiliary input".

Press this button to enter a name for

the profile using the virtual keypad

"Ringtone".

Press "Confirm".

Staging optimises the distribution of

sound in the passenger compartment.

Press "Confirm" to save the settings.

408

Audio and Telematics

Press this button to add a photograph

to the profile.

Press this button to initialise the

profile selected.

Select a "Profile" (1 or 2 or 3) to

associate the "Audio settings" with it.

2

Select "Audio settings".

Insert a uSB memory stick containing

the photograph in the uSB port.

Select the photograph.

Initialisation of the profile selected

activates the english language by default.

Select "Ambience".

"Distribution".

Press "Confirm" to accept the

transfer of the photograph.

3

4

5

6

7

or

Press "Confirm" again to save the

settings.

or

"Sound".

"Voice".

The location for the photograph is

square; the system deforms the original

photograph if in another format.

"Ringtone".

Press "Confirm" to save the settings.

.

409

Audio and Telematics (Nav) -> Connectivity / Radio Media / Phone for Your Peugeot Traveller Van First Generation (2016-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals