Get Instruments -> Service indicator Guide for Peugeot Traveller Van First Generation (2016-2026)

Instruments

Engine coolant temperature

Service indicator

System which informs the driver when the

next service is due, in accordance with the

manufacturer's servicing schedule.

1

Checking the level

After driving for a few minutes, the temperature

and pressure in the cooling system increase.

To top-up the level:

F

wait at least one hour for the engine to

cool,

unscrew the cap two turns to allow the

pressure to drop,

when the pressure has dropped, remove

the cap,

top-up the level to the "MAX" mark.

The point at which the next service is due is

calculated from the last indicator zero reset,

depending on the distance travelled and the

time elapsed since the last service.

With the engine running, when the needle is:

-

in zone A, the temperature of the engine

coolant is correct,

For BlueHDi Diesel versions, the degree of

deterioration of the engine oil is also taken into

account (depending on the country of sale).

-

in zone B, the temperature of the engine

coolant is too high; the maximum

temperature and the central STOP warning

lamps come on, accompanied by an

audible signal and a warning message in

the touch screen.

You MUST stop as soon as it is safe to do so.

Wait a few minutes before switching off the

engine.

Contact a PeugeoT dealer or a qualified

workshop.

Be aware of the risk of burns when

topping-up the cooling system. Do not

fill above the maximum level (indicated

on the header tank).

29

Instruments

More than 1 800 miles (3 000 km)

remain before the next service is due

Less than 600 miles (1 000 km)

remain before the next service is due

Service overdue

When the ignition is switched on, no service

information appears in the screen.

Example: 560 miles (900 km) remain before

the next service is due.

For 5 seconds after the ignition is switched on,

the screen indicates:

For 5 seconds after the ignition is switched on,

the spanner flashes to indicate that the service

must be carried out as soon as possible.

Example: the service is overdue by 180 miles

(300 km).

Between 600 miles (1 000 km)

and 1 800 miles (3 000 km) remain

before the next service is due

For 5 seconds after the ignition is switched on, the

spanner symbolising the service operations comes

on. The distance recorder display line indicates the

distance remaining before the next service is due.

Example: 1 700 miles (2 800 km) remain before

the next service is due.

For 5 seconds after the ignition is switched on,

the screen indicates:

5 seconds after the ignition is switched on,

the distance recorder resumes its normal

operation. The spanner remains on to

indicate that a service must be carried out

soon.

For 5 seconds after the ignition is switched on, the

screen indicates:

5 seconds after the ignition is switched on,

the distance recorder resumes its normal

operation. The spanner remains on.

For BlueHDi Diesel versions, this alert may

also be accompanied by the fixed illumination

of the service warning lamp when the ignition

is on.

5 seconds after the ignition is switched on,

the spanner goes off; the distance recorder

resumes its normal operation. The screen then

indicates the total distance.

30

Instruments

Resetting the service indicator

The distance remaining may be

weighted by the time factor, depending

on the driving conditions.

If you have to disconnect the battery

1

following this operation, lock the vehicle

and wait at least five minutes for the

reset to be registered.

Therefore, the spanner may also come

on if you have exceeded the period

since the last service, indicated in the

manufacturer's service schedule.

For BlueHDi Diesel versions, the

spanner may also be brought on earlier

than expected, depending on the

degree of deterioration of the engine oil

(depending on the country of sale).

The rate of deterioration of the engine

oil depends on the driving conditions in

which the vehicle is used.

Retrieving the service

information

You can access the service information at any

time.

After each service, the service indicator must

be reset to zero.

If you have carried out the service on your

vehicle yourself, switch off the ignition:

F

Press this button.

F

Press and hold this button,

The service information is displayed for a

few seconds, then disappears.

F

Switch on the ignition; the distance

recorder display begins a countdown,

When the display indicates "=0", release

the button; the spanner disappears.

31

Instruments -> Service indicator for Your Peugeot Traveller Van First Generation (2016-2026)

Related Topics

Instruments

Popular Owner Manuals

Latest Owner Manuals