WATER HEATER
Before the water heater is to be used, fill the fresh water system
and purge the water lines to and from the water heater by
opening all the hot-water faucets until water steadily flows from
each one and no “spurting” or “hissing” sounds are heard. The
water heater uses either the LP gas system or the 120-volt AC
electrical system to operate the heater. Proper and safe operation
of the water heater requires that all safety information provided in
the owner’s manual be read and understood before placing the
water heater in service. Take the time to become familiar with
this manual (provided in the Owner’s Information Package).
The water heater is designed for operation either with LP gas or
120-volt AC electricity.
NOTE: When you turn “on” the switch for the water heater the middle red button will light up. It will go off after
several seconds—this means the water heater is lit. However, if the light stays illuminated, then that means the
water heater has not ignited.
40
English