Get Minor repairs -> Inflating tyres on vehicles without level control Guide for Porsche Cayenne SUV First Generation (2002-2010)

Minor Repairs 313

Inflating tyres on vehicles without

level control

The compressor with pressure tester is located in

the luggage compartment under the loadspace

floor.

f Please follow the operating instructions on the

compressor.

1. Screw filler hose of the compressor onto the

tyre valve.

2. Remove cover A of the engine compartment

lining.

+ = Positive terminal for jump lead starting

– = Ground point for jump lead starting

3. Connect clips of the compressor to the jump

lead starting terminals.

Always observe the sequence below:

– Open the cap of the positive terminal for jump

lead starting (+).

– Connect positive lead (red) to the positive

terminal for jump lead starting (+).

– Connect negative lead (black) to the negative

terminal for jump lead starting (–).

314 Minor Repairs

Caution!

Danger of burns. The compressor filler hose

can become hot during the inflation process.

f Wear gloves.

4. Switch on compressor.

The required filling pressure will be reached

after a few minutes.

5. Switch off compressor.

6. Check filling pressure with pressure tester.

Then reduce tyre pressure or add more air if

necessary.

Check filling pressure again.

7. Unscrew the compressor filling hose.

Reducing filling pressure on vehicles

without level control

1. Switch off compressor.

2. Open air bleed screw on the filling hose until

the correct filling pressure is achieved.

Minor repairs -> Inflating tyres on vehicles without level control for Your Porsche Cayenne SUV First Generation (2002-2010)